Electron diffraction study of enzyme-hydrolyzed cotton samples

An electron diffraction study on continuously and repeatedly enzyme-hydrolyzed cotton samples was carried out. The electron diffraction pattern on repeatedly enzyme-treated sample reveals a cellulose I pattern with the absence of the 101 plane. This confirms that enzymatic hydrolysis of cotton fibers proceeds preferentially along the 101 plane, being a clevage plane.     

Attack Resilient and Efficient Protocol based on Greedy Perimeter Coordinator Routing—Mobility Awareness for Preventing the Attack in the VANET

Wireless Personal Communications - A Greedy Perimeter Coordinator Routing and Mobility Awareness (GPCR-MA) vehicular routing is a widely accepted routing protocol for VANET (Vehicular Ad hoc...     

Efficacy of biogenic silver nanoparticles against clinical isolates of fungi causing mycotic keratitis in humans

Mycotic keratitis is mainly responsible for vision loss caused by various fungi. Sometimes, proper treatment of such infection is not possible due to unavailability of effective antifungal agents and development of resistance of such fungi to antimycotic drugs. Hence, it is necessary to search for potential antifungal agents, which can effectively eradicate fungal infection of eyes. Nanoparticles‐based antifungal drugs overcome this problem by increasing permeability and properties of drug molecules. In the present study, silver nanoparticles were synthesised by using Helminthosporium sp. and Chaetomium sp. following sequential reduction technique. The synthesised silver nanoparticles were detected primarily by UV‐visible spectrophotometer showing absorption spectra at 424 and 433 nm, respectively. Nanoparticles tracking analysis confirmed the mean particle size of silver nanoparticles as 45 and 55 nm. The synthesised AgNPs showed significant antifungal activity against fungi causing mycotic keratitis, when used alone and in combination with ketoconazole and amphotericin B in the range of 30–70 microgram per millilitre of minimum inhibitory concentration. Thus, the synthesised AgNPs can be used to enhance the activities of ketoconazole and amphotericin B.Inspec keywords: silver, nanoparticles, nanomedicine, antibacterial activity, diseases, permeability, ultraviolet spectra, visible spectra, particle sizeOther keywords: biogenic silver nanoparticles, fungi, mycotitic keratitis, vision loss, infection, antifungal agents, antimycotic drugs, antifungal drugs, permeability, Helminthosporium sp, Chaetomium sp, sequential reduction technique, UV‐visible spectrophotometer, mean particle size, ketoconazole, amphotericin B, wavelength 424 nm, wavelength 433 nm, size 45 nm, size 55 nm, Ag     

Global and Local Mechanical Properties of Autogenously Laser Welded Ti-6Al-4V

Ti-6Al-4V sheets, 3.2-mm in thickness, were butt welded using a continuous wave 4 kW Nd:YAG laser welding system. The effect of two main process parameters, laser power and welding speed, on the joint integrity was characterized in terms of the joint geometry, defects, microstructure, hardness, and tensile properties. In particular, a digital image correlation technique was used to determine the local tensile properties of the welds. It was determined that a wide range of heat inputs can be used to fully penetrate the Ti-6Al-4V butt joints during laser welding. At high laser power levels, however, significant defects such as underfill and porosity, can occur and cause marked degradation in the joint integrity and performance. At low welding speeds, however, significant porosity occurs due to its growth and the potential collapse of instable keyholes. Intermediate to relatively high levels of heat input allow maximization of the joint integrity and performance by limiting the underfill and porosity defects. In considering the effect of the two main defects on the joint integrity, the underfill defect was found to be more damaging to the mechanical performance of the weldment than the porosity. Specifically, it was determined that the maximum tolerable underfill depth for Ti-6Al-4V is approximately 6 pct of the workpiece thickness, which is slightly stricter than the value of 7 pct specified in AWS D17.1 for fusion welding in aerospace applications. Hence, employing optimized laser process parameters allows the underfill depth to be maintained within the tolerable limit (6 pct), which in turn prevents degradation in both the weld strength and ductility. To this end, the ability to maintain weld ductility in Ti-6Al-4V by means of applying a high energy density laser welding process presents a significant advantage over conventional arc welding for the assembly of aerospace components.     

Effect of Postweld Heat Treatment on Microstructure, Hardness, and Tensile Properties of Laser-Welded Ti-6Al-4V

The effects of postweld heat treatment (PWHT) on 3.2-mm- and 5.1-mm-thick Ti-6Al-4V butt joints welded using a continuous wave (CW) 4-kW Nd:YAG laser welding machine were investigated in terms of microstructural transformations, welding defects, and hardness, as well as global and local tensile properties. Two postweld heat treatments, i.e., stress-relief annealing (SRA) and solution heat treatment followed by aging (STA), were performed and the weld qualities were compared with the as-welded condition. A digital image correlation technique was used to determine the global tensile behavior for the transverse welding samples. The local tensile properties including yield strength and maximum strain were determined, for the first time, for the laser-welded Ti-6Al-4V. The mechanical properties, including hardness and the global and local tensile properties, were correlated to the microstructure and defects in the as-welded, SRA, and STA conditions.     

Biological synthesis of silver nanoparticles using the fungus Aspergillus flavus

The fungus, Aspergillus flavus when challenged with silver nitrate solution accumulated silver nanoparticles on the surface of its cell wall in 72 h. These nanoparticles dislodged by ultrasonication showed an absorption peak at 420 nm in UV-visible spectrum corresponding to the plasmon resonance of silver nanoparticles. The transmission electron micrographs of dislodged nanoparticles in aqueous solution showed the production of reasonably monodisperse silver nanoparticles (average particle size: 8.92 ± 1.61 nm) by the fungus. X-ray diffraction spectrum of the nanoparticles confirmed the formation of metallic silver. The Fourier transform infrared spectroscopy confirmed the presence of protein as the stabilizing agent surrounding the silver nanoparticles. These protein-stabilized silver nanoparticles produced a characteristic emission peak at 553 nm when excited at 420 nm in photoluminescence spectrum. The use of fungus for silver nanoparticles synthesis offers the benefits of eco-friendliness and amenability for large-scale production.     

Procedures: Do we really want to know them? An examination of the effects of procedural justice on self-esteem.

This study examined the effects of procedural justice on state-dependent self-esteem using the group-value model and attribution theory to present competing theoretical perspectives. The group-value model predicts a positive relationship between self-esteem and fair procedures. In contrast, attribution theory suggests procedural fairness interacts with outcome favorability to influence self-esteem. Thus, fair procedures will result in higher self-esteem ratings than unfair procedures when the outcome is positive but will result in lower self-esteem ratings than unfair procedures when the outcome is negative. The results of a laboratory and field study provide converging evidence to support the attribution theory predictions. The results of a 2nd laboratory study suggest that self-esteem is influenced by outcome expectancies, not actual outcomes. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A new parallel algorithm for parsing arithmetic infix expressions

A new parallel algorithm for transforming an arithmetic infix expression into a par se tree is presented. The technique is based on a result due to Fischer (1980) which enables the construction of the parse tree, by appropriately scanning the vector of precedence values associated with the elements of the expression. The algorithm presented here is suitable for execution on a shared memory model of an SIMD machine with no read/write conflicts permitted. It uses O(n) processors and has a time complexity of O(log²n) where n is the expression length. Parallel algorithms for generating code for an SIMD machine are also presented.     

Characteristics of holding, patterns of play, and social behaviors between parents and infants in New Delhi, India.

Characteristics of holding, play, and social behaviors between 54 mothers and fathers and their 1-year-old infants were observed within the context of their extended families in New Delhi, India. Mothers picked up and held infants more than did fathers, and were more likely to feed and comfort them and to invest more time feeding and displaying affection to them than were fathers. When parents held infants they were more likely to display affection than to feed, comfort, or play with them. Fathers engaged in more rough play than did mothers, and mothers engaged in more peek-a-boo than did fathers. Mothers and fathers treated boys and girls quite similarly. Infants smiled at, vocalized to, and followed mothers more than they did fathers. Parents were generally preferred over relatives as social partners. The data point to the cultural specificity of certain parent–child activities. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

Measurement of focal length with phase-shifting Talbot interferometry

Phase-shifting interferometry with a Fourier fringe analysis technique is implemented to analyze Talbot interferometric fringes and to evaluate the focal length of a lens. A four-step algorithm is used to obtain the phase map of the lens. The slope of the phase map is related to the focal length, and it is from this relationship that we evaluate the focal length. Experimental results are presented. Our experimental study suggests that phase-shifting Talbot interferometry combined with a Fourier fringe analysis technique can be advantageously used to improve the accuracy of measurement.