Inhibition of atmospheric corrosion of mild steel by sodium benzoate treatment

The objective of this study was to evaluate the effectiveness of sodium benzoate as an inhibitor to slow down or prevent atmospheric corrosion/discoloration of the local mild steel during storage in the Arabian Gulf region. Test specimens were prepared from locally produced reinforcing steel products. The inhibitor solution was applied on steel specimens at a concentration of 100 mM for 1 day at room temperature. Wooden exposure racks were used to hold as-received and inhibitor-treated specimens during atmospheric exposure for different periods. Corrosion was evaluated through weight loss determination and electrochemical technique. As expected, the Arabian Gulf atmosphere was corrosive on the as-received local mild steel. On the other hand, treatment of steel with sodium benzoate lowered its corrosion rate during initial days of its exposure to atmosphere. However, atmospheric corrosion inhibition performance of sodium benzoate deteriorated with exposure time after 30 or more days of atmospheric exposure, and the corrosion rates of sodium benzoate-treated specimens reached that of the unprotected specimens at the end of 90 days of atmospheric exposure.     

HiSQL: A Front-end Query System for Historical Relational Databases

The paper describes a prototype system called HiSQL (Historical SQL) which extends the functionality of SQL in manipulating historical data, by providing functions for spatial and temporal processing. Conceptually the paper is divided into three parts: the first part deals with the design and architecture of the system; the second part introduces a case study (the defters); and the third part describes specific functions for spatial and temporal processing of serial documents. The paper concludes with a comparison between HiSQL and SQL and suggestions for further work. This revised version was published online in August 2006 with corrections to the Cover Date.     

Performance failure analysis of EDFA cascades in optical DWDM packet-switched networks

A simple and comprehensive technique to determine the probability that a cascade of erbium-doped fiber amplifiers (EDFAs) may be driven into unacceptable regimes of bit error rate (BER) and/or gain levels is presented. This technique allows network designers to determine the tolerances by which the signal power levels may deviate from their predesigned average values and still give acceptable gain variances and BERs at the receiver. We show that even in the signal power range well above the receiver sensitivities (-38 dBm/ch) where the gain spread is not significant, the corresponding spread in BER due to random arrival of packets might result in unacceptable performance. We show for typical levels of operation, the BER temporarily (for about 3 /spl mu/s) deviates to below 10/sup -9/ (10/sup -15/) with a probability of 10/sup -3/ (10/sup -2/), for 100 (64) channels. We show that the gain spread for a single EDFA can be negligible for a range of signal and pump powers at a given average gain.     

Exact solution of elasto-plastic stresses in a metal-matrix composite beam of arbitrary orientation subjected to transverse loads

An analytical elasto-plastic stress analysis is presented for a metal-matrix composite beam of arbitrary orientation subjected to a single transverse force applied to the free end of the beam and a uniformly distributed load. The material is assumed to be perfectly plastic in the elasto-plastic solution. A composite consisting of stainless-steel-reinforced aluminum was produced for this work. Sample problems are given for various orientation angles. Elastic, elastoplastic and residual normal and shear stresses are calculated. The location of the elasto-plastic boundary of the beam is obtained according to the x coordinates of the beam.     

Maximization of total surface area of Pt-SnO<Subscript>2</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalyst by the Taguchi method

The maximization of the total surface area of Pt-SnO₂/Al₂O₃ catalyst was studied by using the Taguchi method of experimental design. The catalysts were prepared by sol-gel method. The effects of HNO₃, H₂O and aluminum nitrate concentrations and the stirring rate on the total surface area were studied at three levels of each. L₉ orthogonal array leading nine experiments was used in the experimental design. The parameter levels that give maximum total surface area were determined and experimentally verified. In the range of conditions studied it was found that, medium levels of HNO₃ and H₂O concentration and lower levels of aluminum nitrate concentration and stirring rate maximize the total surface area.     

Fuzzy multiattribute evaluation of R&D projects using a real options valuation model

R&D project selection decision is very important in two ways. First, in many organizations, R&D budget represents huge investment. Project selection decisions could be thought with the strategic objectives and plans of the firm. Second, R&D projects' organizational returns are multidimensional in nature and risky in terms of projected outcome. Real options approach helps to calculate this risky side of the selection process. This paper considers that multidimensional side of the R&D project selection process. Another consideration is the vagueness in the evaluation process. The fuzzy analytic hierarchy process, which takes monetary (fuzzy real option value) and nonmonetary (capability, success probability, trends, etc.) criteria into account, is used to make this selection among alternative R&D projects. A real case study is given to illustrate the application of the proposed approach. © 2008 Wiley Periodicals, Inc.     

Experiments on the transition from the steady to the oscillatory marangoni convection of a floating-zone under various cold wall temperatures and various ambient air temperature effects

The transition from the steady to the oscillatory Marangoni convection of a floating-zone under various cold wall temperatures and various ambient air temperature effects have been investigated experimentally by heating the sample from above (opposite direction of Marangoni convection and buoyant forces). The heat transfer takes place mainly through conduction as well as the natural convection of the air around the cylindrical liquid bridge. The ambient airflow in the present work is varied by varying the cold wall temperature and ambient air temperature. In this study, the transition from the steady to the oscillatory Marangoni convection flow of a high Prandtl number fluid in a floating half-zone is visualized by means of the already proven method of the “light-cut-technique”. The test fluid zone is held in ambient air at +4 °C, +10 °C, +16 °C, +23 °C, and +28 °C. The onset of oscillations, the oscillation level, and oscillation pattern are investigated under various conditions. It is found that the critical temperature difference (ΔT_Cr) varies substantially when the cold wall temperature and the ambient air temperature are varied.