Temperature/pH/magnetic triple‐sensitive nanogel–hydrogel nanocomposite for release of anticancer drug

Hydrogels, nanogels and nanocomposites show increasing potential for application in drug delivery systems due to their good chemical and physical properties. Therefore, we were encouraged to combine them to produce a new compound with unique properties for a long‐term drug release system. In this regard, the design and application of a nanocomposite hydrogel containing entrapped nanogel for drug delivery are demonstrated. To this aim, we first prepared an iron oxide nanocomposite nanogel based on poly(N‐isopropylacrylamide)‐co‐((2‐dimethylaminoethyl) methacrylate) (PNIPAM‐co‐PDMA) grafted onto sodium alginate (NaAlg) as a biocompatible polymer and iron oxide nanoparticles (ION) as nanometric base (PND/ION‐NG). This was then added into a solution of PDMA grafted onto NaAlg. Through dropwise addition of mixed aqueous solution of iron salts into the prepared polymeric solution, a novel hydrogel nanocomposite with excellent pH, thermal and magnetic responsivity was fabricated. The synthesized samples were fully characterized using Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy with energy‐dispersive X‐ray analysis, vibrating sample magnetometry and atomic force microscopy. A mechanism for the formation of PNIPAM‐co‐PDMA/NaAlg‐ION nanogel–PDMA/NaAlg‐ION hydrogel and PND/ION nanogel is suggested. Swelling capacity was measured at various temperatures (25 to 45 °C), pH values (from 2 to 11) and magnetic field and under load (0.3 psi) and the dependence of swelling properties of the nanogel–hydrogel nanocomposite on these factors was well demonstrated. The release rate of doxorubicin hydrochloride (DOX) as an anticancer drug was studied at different pH values and temperatures in the presence and absence of a magnetic field. The results showed that these factors have a high impact on drug release from this nanocomposite. The result showed that DOX release could be sustained for up to 12.5 days from these nanocomposite hydrogels, significantly longer than that achievable using the constituent hydrogel or nanogel alone (<1 day). The results indicated that the nanogel–hydrogel nanocomposite can serve as a novel nanocarrier for anticancer drug delivery. © 2019 Society of Chemical Industry     

A four-bias three-layer graphene-based THz absorber

Wave absorbers are considered to be fundamental building blocks for the manipulation of light. Almost all optical systems exploit absorbers to realize some functions. A highly tunable wide-band THz absorber is presented herein. Utilizing a dual-bias scheme with a single graphene layer leads to greater freedom to control the absorption response, while a conventional periodic array of graphene ribbons and a layer of graphene sheet are also exploited. Also, a circuit model representation for all the constituent parts of the proposed absorber is developed with an evolved design methodology. According to the simulation results, wide-band absorption from 3.5 to 6 THz is achieved.

     

Polyphenol-rich seaweed (Eucheuma cottonii) extract suppresses breast tumour via hormone modulation and apoptosis induction

The edible red seaweed Eucheuma cottonii is abundantly cultivated for carrageenan production. This study investigated the effects of dietary E. cottonii polyphenol-rich extract (ECME) on breast cancer. In vitro assays showed that ECME was antiproliferative against oestrogen-dependent MCF-7 and oestrogen-independent MB-MDA-231 human breast-cancer cells (IC₅₀ values of 20 and 42 μg/ml, respectively) but was non-toxic to normal cell lines. The ECME (150 and 300 mg/kg BW) was fed to female rats and, after 4 weeks, rat mammary tumour was induced using LA7 cells (inoculated subcutaneously). The ECME inhibited tumour development and erythrocyte lipid peroxidation in the cancer-induced rats, dose-dependently. It showed anti-oestrogenic effects on the rat estrous cycle and serum hormone levels. Electron microscopy and histopathology observations confirmed apoptosis in the rat mammary tumours. The polyphenol-rich ECME was tumour-suppressive via apoptosis induction, downregulating the endogenous oestrogen biosynthesis, and improving antioxidative status in the rats.     

The effect of weathering on durability and deformability properties of granitoid rocks

In this paper, the effects of weathering on durability and deformability properties for three different types of granitoid rocks were investigated. Five weathering grades ranging from fresh to completely weathered rocks were considered for each rock type. Deformability has been evaluated based on failure strain, tangent and secant modulus. For measuring these parameters, at least five uniaxial compressive strength tests with axial strain recorded were conducted on each weathering grade. To assess the weathering effect on the durability behavior of these rocks, a slake durability test was performed up to 40 cycles. The obtained results indicated that uniaxial compressive strength and elastic modulus dramatically decrease with increasing weathering grade. After moderately weathering grade, remarkable damage was observed in the structure and fabric of considered rocks. The results from slake durability tests showed that the slake durability index for each weathering grade has a certain changes trend which can be used in determination of the weathering grade and the long-term durability assessment. Moreover, the results showed that for evaluation of the long-term durability of the mentioned rock types, at least eight cycles should be considered, while two cycles were sufficient for estimation of weathering grade.     

Unidirectional growth of pure and L-lysine added ADP crystals from aqueous solution

Pure and L-lysine added ammonium dihydrogen phosphate (ADP) crystals were grown in the 〈001〉 direction by Sankaranarayanan-Ramasamy (S-R) method. The grown crystals were characterized by X-Ray diffractometry (XRD), UV-Vis spectroscopy, Fourier Transform Infrared (FT-IR) and Vicker’s Microhardness analysis. XRD spectrum of each of the grown crystals proved its crystallinity. The crystals showed good transparency in the entire visible region. FT-IR spectra of the specimens revealed the presence of functional groups in them. The hardness of the pure and L-lysine added ADP crystals were measured and that of the added one was found higher. Meanwhile, it was found that the ADP crystals (pure and L-lysine added) grown by S-R method had higher hardness compared to ADP crystal grown by conventional method.     

Sulfonated Reduced Graphene Oxide (RGO-SO3H): As an Efficient Nanocatalyst for One-Pot Synthesis of 2-Amino-3-cyano-7-hydroxy-4H-chromenes Derivatives in Water

Sulfonated reduced graphene oxide (RGO-SO₃H) was found to be an efficient catalyst for one-pot synthesis of a class of 2-amino-3-cyano-7-hydroxy-4H-chromenes derivatives using multicomponent reaction (MCR) of phenols, aldehydes and malononitrile under mild and green conditions. The reaction was performed in water as a green solvent and range of 2-amino-3-cyano-7-hydroxy-4H-chromenes were obtained in good to excellent yields. The RGO-SO₃H was reusable at least 5 times without significant decrease in its catalytic activity.     

Production of active lipase by Rhizopus oryzae from sugarcane bagasse: solid state fermentation in a tray bioreactor

This study deals with production of lipase in solid state fermentation by Rhizopus oryzae from sugarcane bagasse. A tray bioreactor was designed for the extracellular enzyme production. Daily, lipase production was evaluated at several incubation temperatures. Furthermore, the influence of temperature and humidity of the cabinet, depth of solid bed, particle size, initial moisture content and supplementary substrate (olive oil) as carbon source was investigated. The obtained results showed that bioreactor temperature of 45 °C, humidity of 80%, solid bed depth of 0.5 cm, particle size in the range of 0.335–1 mm, substrate initial moisture content of 80% for the top tray and 70% for the middle tray and supplementary substrate of 8% (v/w) olive oil led to maximum lipase production. Under optimum fermentation conditions after 72‐h incubation, maximum lipase activities for the top, middle and bottom trays were 215.16, 199.36 and 52.64 U gds^?1, respectively.     

Microwave assisted functionalization of carboxylated‐multiwalled carbon nanotubes with 5‐aminoisophthalic acid and its application for the preparation of chiral poly(ester‐imide)/CNT nanocomposites

This article presents the results of investigation into surface modification of carboxylated‐multiwalled carbon nanotubes (MWCNT)s by 5‐aminoisophthalic acid under microwave irradiation as a fast, safe, and simple method. The different contents of functionalized MWCNTs (5, 10, 15 wt%) were effectively dispersed in an aromatic polymer through ultrasonic irradiation to prepare MWCNT reinforced polymer nanocomposites (NC)s. The chiral poly(ester‐imide) (PEI) was prepared by a direct polycondensation of chiral diacid with 4,4′‐thiobis(2‐tert‐butyl‐5‐methylphenol). The effect of the presence of MWCNTs on morphological and thermal properties of the NCs was investigated by X‐ray diffraction, FT‐IR spectroscopy, thermogravimetric analysis (TGA), transmission electron microscopy, and field emission scanning electron microscopy. According to TGA data, the PEI/MWCNT NCs showed a much better thermal stability than pristine polymer. The microstructure study of the NCs indicated the compatibility of functionalized MWCNTs with PEI and uniform distribution of them in the polymer matrices. POLYM. COMPOS., 37:835–843, 2016. © 2014 Society of Plastics Engineers     

Design of electronic sections for nano-displacement measuring system

Noncontact displacement measurement is generally based on the interferometry method.In the semiconductor industry,a technique for measuring small features is required as circuit integration becomes denser and the wafer size becomes larger.An interferometric system known as a three-longitudinal-mode heterodyne interferometer (TLMI) is made of two main parts:optical setup and electronic sections.In the optical part,the base and measurement signals having 500-MHz frequency are produced,resulting from interfering three longitudinal modes.The secondary beat frequency to measure the displacement in the TLMI is about 300kHz.To extract the secondary beat frequency,wide-band amplifiers,double-balanced mixers (DBMs),band-pass filters (BPFs),and low-pass filters (LPFs) are used.In this paper,we design the integrated circuit of a super-heterodyne interferometer with total gain of 56.9dB in size of 1030μm×1030μm.