The temperature dependence of luminescence from a long-lasting phosphor exposed to ionizing radiation

The temperature dependence of luminescence from a long-lasting phosphor (LLP), SrAl₂O₄ : Eu²⁺,Dy³⁺, exposed to ionizing radiation has been measured to understand the LLP luminescence mechanism. Evaluation of the decay constants of the LLP exposed to -, β- or γ-rays at temperatures from 200 to 390 K showed that the decay constant is divided into four components ranging from 10⁻⁴ to 10⁻¹ s⁻¹ with activation energies of 0.02–0.35 eV.

Total luminous intensity from the LLP with changing irradiation temperature has its maximum value around the room temperature. Irradiation at elevated temperature (390 K) has the total luminescence pattern with monotonous decrease as temperature rises. As a result of evaluating the temperature dependence of luminescence, the luminescence mechanism is considered as follows:

Full-size image

 

Improvement of levitation characteristics in a magnetic bearing system using HTSC‐permanent magnet hybrid structure

Magnetic bearing using pinning force of a permanent magnet and a high‐temperature superconductor has been developed. Additional permanent magnet is introduced to increase the levitation force of the magnetic bearing. In this hybrid magnetic bearing system, levitation force is mainly given by the repulsive force of the permanent magnets, and stability for the lateral direction is given by pinning force of the superconductor. The experimental device is developed. A ring‐type superconductor and a bulk one are examined. Levitation characteristics of the hybrid magnetic bearing are measured. The bulk superconductor shows better characteristics of both levitation and lateral stability than the ring one. Levitation force of the hybrid system becomes about twice as large as that of the nonhybrid one. Although, the repulsive force of the permanent magnet decreases the lateral stability of the system, its influence becomes small by choosing an adequate position of the permanent magnets and the superconductor. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(1): 71–77, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10350     

20 Gbit/s soliton transmission using alternating dispersionarrangement in standard fibre systems

An alternating dispersion arrangement is proposed for soliton systems with dispersion compensation to improve soliton stabilisation. A transmission experiment at 20 Gbit/s over 2600 km long singlemode fibre was successfully demonstrated by employing this novel dispersion arrangement     

Neutronic and thermodynamic feasibility of UF6-NpF6 fueled transmutation reactor

Transmutation of neptunium, which is contained in radioactive wastes discharged from nuclear reactors, was investigated as a substitutional method for geologic disposal. We proposed a transmutation reactor fueled with a mixture of gaseous ²³³UF₆ and ²³⁷NpF₆. Neutronic and thermodynamic analysis of the reactor revealed the feasibility of the concept. The reactor has two principal advantages: (1) use of the fuel gas enables on-line reprocessing, (2) ²³⁷Np can be transmuted by a high neutron flux. Our calculation indicated that the transmutation rate of ²³⁷Np was 335 g/year/MW_th, which is much larger than the annual yield of ²³²Np in PWR (6.19 g/year/MW_th).     

Granular Reasoning Using Zooming In & Out: Part 2. Aristotle's Categorical Syllogism

The concept of granular computing is applied to Aristotle's categorical syllogism. Such kind of reasoning is called granular reasoning in this paper. For the purpose, two operations called zooming in & out are introduced to reconstruct granules of possible worlds.     

Reduction of 4-cyclohexyl-1-[(1R)-1,2-diphenylethyl]-piperazine-induced memory impairment of passive avoidance performance by sigma 1 receptor agonists in mice

The laryngeal chemoreflex (LCR) is a potentially life-threatening reflex that is elicited in immature animals by the topical application of water to the laryngeal mucosa. The reflex response is characterized by immediate apnea and laryngeal adduction and delayed cardiovascular instability. The cardiorespiratory changes of the LCR may be life-threatening, particularly in very immature animals such as piglets under 2 weeks of age. The afferent and efferent limbs of the LCR are mediated through the vagus nerve, but the neuromediators responsible for the reflex changes have not yet been clearly elucidated. Previous agonist and antagonist studies in immature dogs demonstrated that substance P, a sensory tachykinin, mediates the life-threatening esophagolaryngeal adductor reflex elicited by distal esophageal sensory nerve stimulation. This study was conducted to determine if substance P also plays a role in mediating the LCR. The LCR response was compared before and after treatment with intravenous substance P antagonist (Pfizer CP-96,345-1) in eight piglets (mean 27.7 days of age). The laryngeal and cardiovascular responses of the animals following intravenous administration of the tachykinins substance P, neurokinin A, and neurokinin B were also assessed. Pretreatment with substance P antagonist did not alter the LCR's duration of apnea (p > .10), laryngeal adductor response, or early change in mean arterial pressure (p > .10), although the early maximal heart rate response was significantly altered (p < .01). Intravenous substance P, neurokinin A, and neurokinin B did not reproduce the laryngeal respiratory response of the LCR. We conclude that substance P, neurokinin A, and neurokinin B are not key neurotransmitters of the LCR.     

Simple chemical syntheses of TAG monohydroperoxides

For the purpose of synthesizing standards to be used in the quantification of TAG hydroperoxides, three TAG (1,2-dioleoyl-3-palmitoylglycerol, 1-oleoyl-2-linoleoyl-3-palmitoylglycerol, and triolein) monohydroperoxides were chemically synthesized as authentic specimens. TAG were prepared by using a simple condensation in pyridine of glycerol and the corresponding acid chlorides. These TAG were then converted into monohydroperoxides by a photosensitized peroxidation. The synthesized monohydroperoxides were analyzed by normal-phase and RP-HPLC. The results of normal-phase HPLC analysis showed that monohydroperoxides from a corresponding TAG were a mixture of regioisomers. In RP-HPLC, however, the regioisomers of monohydroperoxides were not separated and gave a single peak, which may improve the sensitivity for the detection of TAG monohydroperoxides. In this study TAG monohydroperoxide standards were synthesized; these will be useful for the study of yet unknown biological and pathological roles of TAG hydroperoxides.     

Ni-Mo alloying of nickel surface by alternating pulsed electrolysis using molybdenum(VI) baths

Electrochemical Ni-Mo alloying of the surface of a nickel substrate was investigated using alternating pulsed electrolysis in an aqueous solution containing only molybdate ions (MoO₄²⁻) as a metal ion component. In this electrochemical process, the nickel substrate was slightly dissolved during the anodic pulses, providing nickel ions into the solution in the vicinity of the substrate, while Ni and Mo were both electrodeposited on the substrate surface during the subsequent cathodic pulses. Through the optimization of anodic and cathodic conditions independently based on a set of direct-current electrolysis data, amorphous Ni-Mo alloy layers were found to be formed at the surface of the nickel substrate by the alternating pulsed electrolysis using the MoO₄²⁻ solution of pH 3.0-5.0. The conditions for Ni-Mo alloy formation were discussed in terms of the dissolving regime of ionic species in the electrolytes determined by an equilibrium calculation.     

Back‐channel‐etched thin‐film transistor using c‐axis‐aligned crystal In–Ga–Zn oxide

Our crystalline In–Ga–Zn oxide (IGZO) thin film has a c‐axis‐aligned crystal (CAAC) structure and maintains crystallinity even on an amorphous base layer. Although the crystal has c‐axis alignment, its a‐axis and b‐axis have random arrangement; moreover, a clear grain boundary is not observed. We fabricated a back‐channel‐etched thin‐film transistor (TFT) using the CAAC‐IGZO film. Using the CAAC‐IGZO film, more stable TFT characteristics, even with a short channel length, can be obtained, and the instability of the back channel, which is one of the biggest problems of IGZO TFTs, is solved. As a result, we improved the process of manufacturing back‐channel‐etched TFTs.