Microfluidic Spinning of Cell‐Responsive Grooved Microfibers

Engineering living tissues that simulate their natural counterparts is a dynamic area of research. Among the various models of biological tissues being developed, fiber‐shaped cellular architectures, which can be used as artificial blood vessels or muscle fibers, have drawn particular attention. However, the fabrication of continuous microfiber substrates for culturing cells is still limited to a restricted number of polymers (e.g., alginate) having easy processability but poor cell–material interaction properties. Moreover, the typical smooth surface of a synthetic fiber does not replicate the micro‐ and nanofeatures observed in vivo, which guide and regulate cell behavior. In this study, a method to fabricate photocrosslinkable cell‐responsive methacrylamide‐modified gelatin (GelMA) fibers with exquisite microstructured surfaces by using a microfluidic device is developed. These hydrogel fibers with microgrooved surfaces efficiently promote cell encapsulation and adhesion. GelMA fibers significantly promote the viability of cells encapsulated in/or grown on the fibers compared with similar grooved alginate fibers used as controls. Importantly, the grooves engraved on the GelMA fibers induce cell alignment. Furthermore, the GelMA fibers exhibit excellent processability and could be wound into various shapes. These microstructured GelMA fibers have great potential as templates for the creation of fiber‐shaped tissues or tissue microstructures.     

Impact of oxygen concentration during the deposition of window layers on lowering the metastability effects in Cu(In,Ga)Se2/CBD Zn(S,O) based solar cell

The purpose of the present paper is to focus on the impact of oxygen gas partial pressure during the sputtering of i‐ZnO and ZnMgO on the transient behavior of Cu(In,Ga)Se₂ (CIGSe) based solar cells parameters when a CBD‐Zn(S,O) buffer layer is used. Based on electrical characterization of cells, it is observed that the effect of light soaking is different on J–V characteristics depending on whether oxygen is or is not present during the first deposition time of the i‐ZnO or ZnMgO layers. In fact, when cells are prepared with standard i‐ZnO, the efficiencies are very low and a pronounced transient behavior is observed. However, when the first 10 nm of i‐ZnO or ZnMgO is formed by sputtered layer without adding oxygen during the process, depending on the thickness of the buffer layer, the transient effects strongly decreases. It is then possible to get stable cells reaching efficiencies quite similar to the CdS reference cells, especially with ZnMgO, without any post‐treatments. Copyright © 2015 John Wiley & Sons, Ltd.     

Effect of Sliding History on Super-Low Friction of Diamond-Like Carbon Coating in Water Lubrication

Water lubrication using diamond-like carbon (DLC) coatings is regarded as being a promising eco-friendly technology. However, it has been reported that delamination of DLC coatings occurs in water. The authors clarified that the application of friction in ambient air prior to self-mating DLC water lubrication, in addition to the suppression of DLC delamination, caused the friction coefficient to decrease more than when no processing is performed in the boundary lubrication region. When compared to the case when there was no pre-sliding, in terms of the wear scar, in this case, a much more hydrophilic and smoother surface was formed. Therefore, the friction-reducing process in water due to the presence of a sliding history (pre-sliding in ambient air) was clarified by an analysis of the DLC geometry, structure, chemical state and an in situ analysis that can measure the friction properties and the chemical state of DLC. We clarified that the process in which the oxidation and structural changes of the DLC proceed at the time of pre-sliding in ambient air using in situ Fourier transform infrared spectroscopy–attenuated total reflection. It was also revealed that the OH termination subsequently accelerated rapidly due to the friction in water after pre-sliding process. In addition, a time-of-flight secondary ion mass spectrometry analysis revealed that this OH group was derived from the lubricating water and unlike the case in which there was no pre-sliding in ambient air, the rate at which OH terminates increased considerably.     

Effect of dehydroxylation on the specific heat of simple clay mixtures

Specific heats of four clays (standard reference kaolins, commercial kaolin and montmorillonite) before and after dehydroxylation have been measured. The results were compared with handbook data for the thermal chemical properties of solids. Good agreement has been obtained for the reference kaolin before any thermal treatment. Then, following thermal treatments at 500 °C, 600 °C and 700 °C, dehydroxylation leads to a progressive decrease of heat capacity per unit mass. After dehydroxylation, heat capacity values for all the studied materials are rather similar and agree closely with those estimated by the rule of mixtures. Finally, an empirical relation describing the specific heat capacity (C) in J kg⁻¹ K⁻¹ of dehydroxylated kaolin from 40 °C to 1100 °C is proposed: C = 1128 + 0.102T − 36 × 10⁶T⁻² where T is in K.     

Fungal fucoidanase production by solid-state fermentation in a rotating drum bioreactor using algal biomass as substrate

Fucoidanase enzymes able to degrade fucoidan were produced by solid-state fermentation (SSF). The fermentation assays were initially carried out in a laboratory-scale rotating drum bioreactor, and two fungal strains (Aspergillus niger PSH and Mucor sp. 3P) and three algal substrates (untreated, autohydrolyzed, and microwave processed seaweed Fucus vesiculosus) were evaluated. Additionally, fermentations were carried out under rotational (10 rpm) and static conditions in order to determine the effect of the agitation on the enzyme production. Agitated experiments showed advantages in the induction of the enzyme when compared to the static ones. The conditions that promoted the maximum fucoidanase activity (3.82 U L^?1) consisted in using Mucor sp. 3P as fungal strain, autohydrolyzed alga as substrate, and the rotational system. Such conditions were subsequently used in a 10 times larger scale rotating drum bioreactor. In this step, the effect of controlling the substrate moisture during the enzyme production by SSF was investigated. Moreover, assays combining the algal substrate with an inert support (synthetic fiber) were also carried out. Fermentation of the autohydrolyzed alga with the moisture content maintained at 80% during the fermentation with Mucor sp. 3P gave the highest enzyme activity (9.62 U L^?1).     

Spatial Quality Evaluation of Pedestrian Streets

This paper presents an assessment of the spatial quality of a pedestrian street located in downtown Bauru, S~o Paulo State, Brazil, from the application of some urban sustainability indicators. Multi-method was used to evaluate the thermal comfort quality of users, urban accessibility and preservation of architectural heritage. The results show that the sustainability indicators, apart from being effective tools in identifying problems, can assist local managers in decision making, planning and monitoring of pedestrian public space. These indicators contribute to a broad diagnosis of the pedestrian street and also the formulation of programs, projects and municipal policies, aimed at providing a better life quality for pedestrians.     

New polylactide/layered silicate nanocomposites. 5. Designing of materials with desired properties

Understanding the structure/property relationship in polymer/layered silicate nanocomposites is of great importance in designing materials with desired properties. In order to understand these relations, a series of polylactide (PLA)/organically modified layered silicate (OMLS) nanocomposites have been prepared using a simple melt extrusion technique. Four different types of OMLS have been used for the preparation of nanocomposites, three were modified with functionalized ammonium salts while fourth one was a phosphonium salt modified OMLS. The structure of the nanocomposites in the nanometer scale was characterized by using wide-angle X-ray diffraction and transmission electron microscopic observations. Using four different types of layered silicates modified with four different types of surfactants, the effect of OMLS in nanocomposites was investigated by focusing on four major aspects: structural analysis, thermal properties and spherulite morphology, materials properties, and biodegradability. Finally, we draw conclusions about the structure/property relationship in the case of PLA/OMLS nanocomposites.     

Variation in Attitudes and Values Among Japanese Americans and Japanese Brazilians Across Generations

This paper discusses the acculturation of Japanese descents through the approach of exploratory data analysis. When considering acculturation, it may be common sense to consider that Sansei are more assimilated with the culture of the immigrated country than are Nisei. While observing the survey results, the question “Is this really true?” occurred to me. The point of the study is to examine, by extensive sample surveys, the hypothesis that acculturation among generations of immigrants is of two types, namely: ‘natural acculturation’ and ‘a tendency of turning toward the Japanese way of thinking.’ This is considered to be an important point when the acculturation of a race is considered.

The author deals with the degree of acculturation among generations of Japanese Americans and Japanese Brazilians, based on international comparative survey results among the host society, ethnic society and different immigrant groups consisting of several generations.

The results supported the hypothesis that acculturation among generations of immigrants is of two types. Possible factors related to socio-education may also exert effects on their attitudes and values.