The circular economy of agro and post-consumer residues as raw materials for sustainable ceramics

The circular economy in the area of waste management implies their re-use as a raw material in different production cycles. Both the qualitative and quantitative characteristics of the residues from the agro sector and those of the products of the ceramics sector make possible to think of a feasible application. This review will illustrate some examples of recycling of residues deriving from animal and vegetable sectors (and two post consume products, spent coffee grounds, and packaging glass cullet), studied by the authors, falling within the concept of urban and agricultural sustainable development. Not only the most traditional products such as glass-ceramics, glazes, bricks, but also the most innovative lightweight aggregates for plant structures or in and out soil cultivation, as well as additives such as deflocculants for ceramic suspensions, which will be illustrated from the design/production, characterization, and comparison with commercial products.     

The importance of landscape in wine quality perception: An integrated approach using choice-based conjoint analysis and combination-based permutation tests

This work’s aim is to evaluate the importance of landscape in wine quality perception using a novel integrated approach based on two statistical techniques, i.e. choice-based conjoint analysis (Gustafsson et al., 2001) and combination-based permutation tests (Corain and Salmaso, 2004, Pesarin and Salmaso, 2009a). To this end we developed a preference choice experiment which was submitted to a sample of respondents during blind wine tasting meetings. The obtained results allow us to weigh up and emphasise the importance of an attractive landscape to the perception of a finer quality of wine. Indeed, we noticed that associating wine to an image of greater visual impact, i.e. an evocative landscape, induces a significantly higher preference for the tasted wine. Moreover, the integrated application of choice-based conjoint analysis and combination-based permutation tests allows us to identify the specific relationship each market segment has with landscape, price and wine quality.     

Pulsed laser deposition of organic and biological materials

We report on the deposition of soft matter thin films by Matrix Assisted Pulsed Laser Evaporation (MAPLE). In particular, thin layers of biological material (Bovine Serum Albumin) and polymers (polyfluorene) for medical and optoelectronic applications, were realized by laser irradiating a frozen solution containing a low amount of material diluted in a laser absorbing volatile solvent. The depositions were carried out varying different parameters as solvent–solute concentration, solvent nature, laser fluencies, etc. The optical, morphological, structural and spectroscopical properties were detected by means of different analyses as FTIR, photoluminescence, AFM and SDS.     

Nucleation and Crystallization of New Glasses from Fly Ash Originating from Thermal Power Plants

The nucleation and crystallization kinetics of new glasses obtained by melting mixtures of a Spanish carbon fly ash with glass cullet and dolomite slag at 1500°C has been evaluated by a calculation method. These glasses, whose microstructure was examined by TEM carbon replica, were susceptible to controlled crystallization in the 800°–1100°C range. The resulting glass-ceramics developed acicular and branched wollastonite crystals or a network of dendritic pyroxene mixed with anorthite feldspar (SEM and EDX analysis). The time–temperature–transformation curves (processing of the XRD data) showed the crystallization kinetics and the critical cooling rate to be in the 12°–42°C/min range.     

Room-Temperature Degradation of t-Zr(Pr)O2 in an Aqueous Suspension Revealed by Perturbed Angular Correlations

This paper deals with the phase stability of an aqueous suspension of tetragonal Zr_0.9Pr_0.1O₂ (20 wt%/vol%) at room temperature as a function of the aging time. The suspension is investigated in situ using the highly localized Perturbed Angular Correlations technique. The results indicate that an almost fully reversible degradation process toward monoclinic zirconia takes place through a first-order reaction of rate constant k =0.7 day⁻¹. Two successive diffusion mechanisms are observed that are interpreted as OH⁻ ions' migration in the grain surface and then, as proton defects' diffusion into the bulk.     

Light emission in AlGaAs/GaAs HEMTs and GaAs MESFETs induced by hotcarriers

Light emission in submicrometer gate AlGaAs/GaAs HEMTs and GaAs MESFETs has been observed at high drain bias values (>4.0 V). The spectral distribution of the emitted photons in the 1.7-2.9-eV range does not correspond to a simple Maxwellian distribution function of the electron energies in the channel. Light emission is observed in correspondence with nonnegligible gate and substrate hole currents, due to the collection of holes generated by impact ionization     

Coextrusion of superconducting wires

Cu/Y₁Ba₂Cu₃O_7?x superconducting composite wires have been fabricated using the powder-in-tube coextrusion process. Increase in load during the extrusion process seems to indicate that powder particles from the deformation zone of the die travel up toward the unextruded part of the billet and gradually increase the density in that part to some saturation value, which prohibits further extrusion at moderate to heavy applied load. A powder removal technique has been devised to perform full length extrusion under such conditions. Powder removal, however, is not required if the extrusion ratio is reduced sufficiently. The extrusion ratio that will give a full length extrusion without powder removal seems to be a function of starting billet length. Extrusion ratio of 2.52 gives smooth full length extrusions with 25.4 mm (1 in.) starting billet length at reasonable load values. Four probe resistivity and magnetic susceptibility measurements indicate a critical temperature (Tc) value of the formed wire to be close to 88 K. Density measurements using the volume displacement method indicate a value of 4.819 g/cm³, which is approximately 76.5% of the theoretical density. M.M. Dehghani and A. Ahmad are Assistant Professor and     

Nucleation and Crystallization of a Lithium Aluminosilicate Glass

An aluminosilicate glass of composition 61SiO₂6Al₂O₃10MgO6ZnO·12Li₂O·5TiO₂ (mol%) has been prepared by a melting process and investigated as far as crystallization is concerned. Glass-ceramic is easily obtained because glass shows a high tendency to crystallize starting from 700°C. The crystalline phases evolve with temperature, showing the aluminosilicates to be the main phase up to 1050°C, followed by metasilicates and silicates, some of which have lower melting points. The titanates of Mg and Zn develop from the phase-separated glass, soon after T _g, and grow to form nucleation centers for the other crystalline phases. The evolution from phase-separated glass to glass-ceramic has been followed by many thermal, diffractometric, spectroscopic, and microscopic techniques.