Reconstruction of the Grenfell Tower fire – Part 4: Contribution to the understanding of fire propagation and behaviour during horizontal fire spread

The tragic events at Grenfell Tower in 2017, involving a combustible façade system, have raised concerns regarding the fire risk that these systems pose. In this series of articles, so far published, fire development inside the initial apartment has been investigated using an appropriate computational fluid dynamics (CFD) model. Several scenarios including different fire sources and ventilation conditions were addressed. Fire propagation through the window to the external façade and to higher apartments was modelled. This model was validated by comparing the numerical results with the visual observations reported in the Grenfell Inquiry. A CFD model of the complete east face of the Grenfell Tower was then created. This paper details CFD modelling of the complete Grenfell Tower façade during the late horizontal phase of fire spread. As the physics of lateral flame spread is different from that for upward flame spread, it is important to assess the validity of the model, thus far developed, for this configuration. Fire propagation over the whole façade is modelled and compared with observations from the real disaster. This provides a better understanding of its fire behaviour and of the contribution of architectural details and their impact on fire spread.     

Germanium-antimony-selenium-tellurium thin films: Clusters formation by laser ablation and comparison with clusters from mixtures of elements

Quaternary germanium-antimony-selenium-tellurium (Ge-Sb-Se-Te) thin films deposited from Ge_19.4Sb_16.7Se_63.9−xTe_x (x = 5, 10, 15, and 20) glass-ceramics targets by radio frequency magnetron sputtering were studied using laser ablation quadrupole ion trap time of flight mass spectrometry. Binary, ternary, and quaternary Ge_aSb_bSe_cTe_d clusters were formed and their stoichiometry was determined. By comparison of the clusters obtained from quaternary Ge-Sb-Se-Te thin films and those from ternary Ge-Sb-Te materials, we found that Ge-Te species are not detected from the quaternary system. Furthermore, Ge-Se and Se-Te species are missing in mass spectra generated from Ge-Sb-Se-Te thin films. From the Ge-Sb-Se-Te thin films, 16 clusters were detected while ternary Ge-Sb-Se glasses yielded 26 species. This might be considered as a signal of higher stability of Ge-Sb-Se-Te thin films which is increasing with a higher content of Te. The missing (Se₂⁺, Ge_aSb⁺ (a = 1–4), and GeSe_c⁺ (c = 1, 2)) and new (Ge⁺ and Sb_bTe⁺ (b = 1–3)) clusters may indicate that some of the structural features of the films (Ge₂Se_6/2 and Se₂Sb-SbSe₂) were replaced by (GeSe_4−xTe_x and SbSe_3−xTe_x) ones. In addition, when comparing the stoichiometry of clusters formed from Ge-Sb-Se-Te thin films with those from the mixtures of the elements, only Sb₃⁺ and SbSe⁺ were observed in both cases. The knowledge gained concerning clusters stoichiometry contributes to the elucidation of the processes proceeding during plasma formation used for the chalcogenide thin films deposition.     

Phosphonic acid‐containing polysulfones as anticorrosive layers

As a part of research work to elaborate polymeric materials for metal corrosion protection, we have developed a new family of phosphonic acid‐containing polymers. The synthesis and the characterization of polysulfones bearing alkyl phosphonate ester side groups are first described. These polymers are synthesized by direct polycondensation of a phosphonate ester‐containing bisphenol by aromatic nucleophilic substitution. The physicochemical properties of the resulting polymers are described. Acidic hydrolysis of phosphonate esters results in the formation of phosphonic acid groups. A series of phosphonic acid‐containing polysulfones is therefore obtained and characterized. A preliminary evaluation of the anticorrosive properties of these polymers is described. In 0.25M Na₂SO₄ solution, the corrosion rate of a polymer‐coated mild steel sample is much lower than of the free metal substrate. These results suggest that phosphonic acid‐containing polysulfones might be interesting as anticorrosive coatings. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41890.     

Aluminium/tin (IV) oxide thermite composite: sensitivities and reaction propagation

ABSTRACT

Thermites are energetic composites made of metal and oxidizer particles that react according to an exothermic reaction and release large amounts of energy. Many possible metal and oxidizer couples exist in the literature. Here, the performance of the aluminum reducing metal and tin (IV) oxide (SnO₂) combination was reported as a function of the fuel/oxidizer mass ratio. The Al/SnO₂ energetic composite, in stoichiometric conditions, was insensitive to impact, sensitive to friction and extremely sensitive to electrostatic discharge. The combustion velocity was determined to be close to 600 m/s. Changing the stoichiometry affected both the sensitivity thresholds to the friction test (160 N to > 360 N) and flame propagation velocity (480–588 m/s) of the Al/SnO₂ composite. These results are reported for the first time.     

Partial Sperm beta1 Integrin Subunit Deletion Proves Its Involvement in Mouse Gamete Adhesion/Fusion

We have previously shown, using antibodies, that the sperm alpha6beta1 integrin is involved in mouse gamete fusion in vitro. Here we report the conditional knockdown of the sperm Itgb1 gene. It induced a drastic failure of sperm fusogenic ability with sperm accumulation in the perivitelline space of in vitro inseminated oocytes deleted or not for the Itgb1 gene. These data demonstrate that sperm, but not oocyte, beta1 integrin subunit is involved in gamete adhesion/fusion. Curiously, knockdown males were fertile in vivo probably because of the incomplete Cre-mediated deletion of the sperm Itgb1 floxed gene. Indeed, this was shown by Western blot analysis and confirmed by both the viability and litter size of pups obtained by mating partially sperm Itgb1 deleted males with females producing completely deleted Itgb1 oocytes. Because of the total peri-implantation lethality of Itgb1 deletion in mice, we assume that sperm that escaped the Itgb1 excision seemed to be preferentially used to fertilize in vivo. Here, we showed for the first time that the deletion, even partial, of the sperm Itgb1 gene makes the sperm unable to normally fertilize oocytes. However, to elucidate the question of the essentiality of its role during fertilization, further investigations using a mouse expressing a recombinase more effective in male germ cells are necessary.     

Does social capital reduce entrepreneurs' petty corruption? Evidence across Indonesian regions

Petty corruption is a barrier to entrepreneurship in emerging countries, justifying to investigate its determinants. Using data on 1,240 entrepreneurs across Indonesian regions, we analyse the effects of social capital. Two-evel ordered probit regressions show that weak-ties discourage entrepreneurs' bribing, strong-ties encourage it, whereas this latter effect is moderated by the quality of access to formal credit. Bribing banks or turning to relatives for external funding are alternative solutions for entrepreneurs facing poor access to formal credit, a common feature in emerging countries, and the second solution is preferred given the risk and psychological costs of corruption.     

Porous protein-based scaffolds prepared through freezing as potential scaffolds for tissue engineering

Successful tissue engineering with the aid of a polymer scaffold offers the possibility to produce a larger construct and to mould the shape after the defect. We investigated the use of cryogelation to form protein-based scaffolds through different types of formation mechanisms; enzymatic crosslinking, chemical crosslinking, and non-covalent interactions. Casein was found to best suited for enzymatic crosslinking, gelatin for chemical crosslinking, and ovalbumin for non-covalent interactions. Fibroblasts and myoblasts were used to evaluate the cryogels for tissue engineering purposes. The stability of the cryogels over time in culture differed depending on formation mechanism. Casein cryogels showed best potential to be used in skeletal tissue engineering, whereas gelatin cryogels would be more suitable for compliable soft tissues even though it also seemed to support a myogenic phenotype. Ovalbumin cryogels would be better suited for elastic tissues with faster regeneration properties due to its faster degradation time. Overall, the cryogelation technique offers a fast, cheap and reproducible way of creating porous scaffolds from proteins without the use of toxic compounds.