Effect of surface waxes on the persistence of chlorpyrifos-methyl in apples, strawberries and grapefruits

The effects of the cuticle and epicuticular waxes of grapefruit, strawberry and apple on the photodegradation and penetration of chlorpyrifos-methyl were studied. Photodegradation experiments were conducted by exposing the insecticide to the light of a xenon lamp in the presence of a film of wax extracted from the fruit surface. The half-life of chlorpyrifos-methyl irradiated in absence of waxes was 9.6 min. The half-lives of pesticide irradiated in the presence of wax extracts of apple, grapefruit and strawberry were 83, 34 and 26 min, respectively. In penetration studies, fruit with and without wax layers were treated with an aqueous suspension of pesticide. The penetration of the pesticide from the cuticle to the pulp was measured after 24 h. Samples without wax contained a higher total amount of insecticide than those with wax. No pesticide was detected in samples of apple and grapefruit pulp. Residues were detected in all fractions of strawberry. The waxes and cuticle appear to have some effect on the photodegradation and penetration of chlorpyrifos-methyl in fruit samples.     

Efficient Simulation of hybrid stripmap/spotlight SAR raw signals from extended scenes

The hybrid stripmap/spotlight mode for a synthetic aperture radar (SAR) system is able to generate microwave images with an azimuth resolution better than the one achieved in the stripmap mode and a ground coverage better than the one of the spotlight mode. In this paper, time- and frequency-domain-based procedures to simulate the raw signal in the hybrid stripmap/spotlight mode are presented and compared. We show that a two-dimensional Fourier domain approach, although highly desirable for its efficiency, is not viable. Accordingly, we propose a one-dimensional (1-D) range Fourier domain approach, followed by 1-D azimuth time-domain integration. This method is much more efficient than the time-domain one, so that extended scenes can be considered. In addition, it involves approximations usually acceptable in actual cases. Effectiveness of the simulation scheme is assessed by using numerical examples.     

Degradation of lincomycin in aqueous medium: Coupling of solar photocatalysis and membrane separation

The photocatalytic oxidation of a common antibiotic, the lincomycin was carried out in aqueous suspensions of polycrystalline TiO₂ Degussa P25 irradiated by sunlight. In order to improve the performance of the lincomycin degradation a hybrid system consisting of a solar photoreactor with the photocatalyst in suspension coupled with a membrane module, used to confine both photocatalyst and pollutants in the reaction environment, was tested.A preliminary study was carried out in order to determine some kinetics parameters of the drug photodegradation. The influence of initial substrate concentration on the lincomycin photooxidation rate was investigated. The photooxidation rate follows a pseudo-first order kinetics with respect to the lincomycin concentration under the used experimental conditions. The presence of the membrane reactor allows the catalyst separation and to operate in continuous mode as the membranes rejection for lincomycin and its oxidation products was quite high.     

BRAF Gene and Melanoma: Back to the Future

As widely acknowledged, 40–50% of all melanoma patients harbour an activating BRAF mutation (mostly BRAF V600E). The identification of the RAS–RAF–MEK–ERK (MAP kinase) signalling pathway and its targeting has represented a valuable milestone for the advanced and, more recently, for the completely resected stage III and IV melanoma therapy management. However, despite progress in BRAF-mutant melanoma treatment, the two different approaches approved so far for metastatic disease, immunotherapy and BRAF+MEK inhibitors, allow a 5-year survival of no more than 60%, and most patients relapse during treatment due to acquired mechanisms of resistance. Deep insight into BRAF gene biology is fundamental to describe the acquired resistance mechanisms (primary and secondary) and to understand the molecular pathways that are now being investigated in preclinical and clinical studies with the aim of improving outcomes in BRAF-mutant patients.     

Manufacturing of polypropylene laminates and related structural reorganization in the crystalline phase

The conditions for obtaining recrystallization in more ordered modifications are described for an uniaxially oriented sample of isotactic polypropylene, annealed with fixed ends. These recrystallization conditions are related to the conditions of a lamination process.     

An optimization framework for “build-or-buy” decisions in software architecture

Building a software architecture that meets functional requirements is a quite consolidated activity, whereas keeping high quality attributes is still an open challenge. In this paper we introduce an optimization framework that supports the decision whether to buy software components or to build them in-house upon designing a software architecture. We devise a non-linear cost/quality optimization model based on decision variables indicating the set of architectural components to buy and to build in order to minimize the software cost while keeping satisfactory values of quality attributes. From this point of view, our tool can be ideally embedded into a Cost Benefit Analysis Method to provide decision support to software architects. The novelty of our approach consists in building costs and quality attributes on a common set of decision variables related to software development. We start from a special case of the framework where the quality constraints are related to the delivery time and the product reliability, and the model solution also devises the amount of unit testing to be performed on built components. We generalize the framework formulation to represent a broader class of architectural cost-minimization problems under quality constraints, and discuss advantages and limitations of such approach.     

Degree-Optimal Routing for P2P Systems

We define a family of Distributed Hash Table systems whose aim is to combine the routing efficiency of randomized networks—e.g. optimal average path length O(log ² n/δlog δ) with δ degree—with the programmability and startup efficiency of a uniform overlay—that is, a deterministic system in which the overlay network is transitive and greedy routing is optimal. It is known that Ω(log n) is a lower bound on the average path length for uniform overlays with O(log n) degree (Xu et al., IEEE J. Sel. Areas Commun. 22(1), 151–163, 2004). Our work is inspired by neighbor-of-neighbor (NoN) routing, a recently introduced variation of greedy routing that allows us to achieve optimal average path length in randomized networks. The advantage of our proposal is that of allowing the NoN technique to be implemented without adding any overhead to the corresponding deterministic network. We propose a family of networks parameterized with a positive integer c which measures the amount of randomness that is used. By varying the value c, the system goes from the deterministic case (c=1) to an “almost uniform” system. Increasing c to relatively low values allows for routing with asymptotically optimal average path length while retaining most of the advantages of a uniform system, such as easy programmability and quick bootstrap of the nodes entering the system. We also provide a matching lower bound for the average path length of the routing schemes for any c. This work was partially supported by the Italian FIRB project “WEB-MINDS” (Wide-scalE, Broadband MIddleware for Network Distributed Services), .     

Recent Advances on High-Speed and Holographic Two-Photon Direct Laser Writing

Two-Photon Lithography, thanks to its very high sub-diffraction resolution, has become the lithographic technique par excellence in applications requiring small feature sizes and complex 3D pattering. Despite this, the fabrication times required for extended structures remain much longer than those of other competing techniques (UV mask lithography, nanoimprinting, etc.). Its low throughput prevents its wide adoption in industrial applications. To increase it, over the years different solutions have been proposed, although their usage is difficult to generalize and may be limited depending on the specific application. A promising strategy to further increase the throughput of Two-Photon Lithography, opening a concrete window for its adoption in industry, lies in its combination with holography approaches: in this way it is possible to generate dozens of foci from a single laser beam, thus parallelizing the fabrication of periodic structures, or to engineer the intensity distribution on the writing plane in a complex way, obtaining 3D microstructures with a single exposure. Here, the fundamental concepts behind high-speed Two-Photon Lithography and its combination with holography are discussed, and the literary production of recent years that exploits such techniques is reviewed, and contextualized according to the topic covered.     

A Joint Numerical-Experimental Study on Impact Induced Intra-laminar and Inter-laminar Damage in Laminated Composites

The investigation of the mechanical response of fibre-reinforced composite laminates under impact loads can be very difficult due to the occurrence of simultaneous failure phenomena. Indeed, as a consequence of low velocity impacts, intra-laminar damages, like fibre and matrix cracking, and inter-laminar damages, such as delaminations, can take place simultaneously. These damage mechanisms can lead to significant reductions in strength and stability of the composite structure. In this paper a joint numerical-experimental study is proposed which, by means of non-destructive testing techniques (Ultra-sound and thermography) and non-linear explicit FEM analyses, aims to completely characterise the impact induced damage in composite laminates under low velocity impacts. Indeed the proposed numerical tool has been used to improve the understanding of the experimental data obtained by Non-Destructive Techniques. Applications on samples tested according to the AECMA (European Association of Aerospace Manufacturers) prEn6038 standard at three different impact energies are presented. The interaction between numerical and experimental investigation allowed to obtain an exhaustive insight on the different phases of the impact event considering the inter-laminar damage formation and evolution.     

From Images to Shape Models for Object Detection

We present an object class detection approach which fully integrates the complementary strengths offered by shape matchers. Like an object detector, it can learn class models directly from images, and can localize novel instances in the presence of intra-class variations, clutter, and scale changes. Like a shape matcher, it finds the boundaries of objects, rather than just their bounding-boxes. This is achieved by a novel technique for learning a shape model of an object class given images of example instances. Furthermore, we also integrate Hough-style voting with a non-rigid point matching algorithm to localize the model in cluttered images. As demonstrated by an extensive evaluation, our method can localize object boundaries accurately and does not need segmented examples for training (only bounding-boxes).