Hot corrosion of TBC-coated components upon combustion of low-sulfur fuels

Gas turbine reliability is a crucial requirement for passenger safety in aviation and a secure energy supply. Hence, corrosive degradation of combustor parts, vanes, and blades in gas turbines must be prevented. One of the most severe forms of corrosion is alkali-sulfate-induced hot corrosion, which is associated with internal sulfidation of components and is usually anticipated to fade in importance in the absence of sulfur. However, the literature suggests that hot corrosion might still occur in low-sulfur combustion gases. In this study, established thermodynamic modeling methods are used to analyze the low-sulfur hot corrosion regime. Liquid sodium chromate is found to be stable in these conditions. A comparison of calculation results and engine findings suggests that high alkali levels can negatively impact thermal barrier coating life even if sulfur is absent in the fuel. Laboratory tests are carried out to validate the chromate formation on MCrAlY-coated specimens. It is shown that molten sodium chromate can alter the oxidation behavior of MCrAlY, promoting the formation of voluminous spinel. This represents a new and different form of hot corrosion compared to type I hot corrosion.     

C/C-SiC component for metallic phase change materials

Thanks to their high energy density and thermal conductivity, metallic Phase Change Materials (mPCM) have shown great potential to improve the performance of thermal energy storage systems. However, the commercial application of mPCM is still limited due to their corrosion behavior with conventional container materials. This work first addresses on a fundamental level, whether carbon-based composite-ceramics are suitable for corrosion critical components in a thermal storage system. The compatibility between the mPCM AlSi₁₂ and the Liquid Silicon Infiltration (LSI)-based carbon fiber reinforced silicon carbide (C/C-SiC) composite is then investigated via contact angle measurements, microstructure analysis, and mechanical testing after exposure. The results reveal that the C/C-SiC composite maintains its mechanical properties and microstructure after exposure in the strongly corrosive mPCM. Based on these results, efforts were made to design and manufacture a container out of C/C-SiC for the housing of mPCM in vehicle application. The stability of the component filled with mPCM was proven nondestructively via computer tomography (CT). Successful thermal input- and output as well as thermal storage ability were demonstrated using a system calorimeter under conditions similar to the application. The investigated C/C-SiC composite has significant application potential as a structural material for thermal energy storage systems with mPCM.     

Dielectric Properties of Ultrathin CaF2 Ionic Crystals

Mechanically exfoliated 2D hexagonal boron nitride (h-BN) is currently the preferred dielectric material to interact with graphene and 2D transition metal dichalcogenides in nanoelectronic devices, as they form a clean van der Waals interface. However, h-BN has a low dielectric constant (≈3.9), which in ultrascaled devices results in high leakage current and premature dielectric breakdown. Furthermore, the synthesis of h-BN using scalable methods, such as chemical vapor deposition, requires very high temperatures (>900 °C) , and the resulting h-BN stacks contain abundant few-atoms-wide amorphous regions that decrease its homogeneity and dielectric strength. Here it is shown that ultrathin calcium fluoride (CaF₂) ionic crystals could be an excellent solution to mitigate these problems. By applying >3000 ramped voltage stresses and several current maps at different locations of the samples via conductive atomic force microscopy, it is statistically demonstrated that ultrathin CaF₂ shows much better dielectric performance (i.e., homogeneity, leakage current, and dielectric strength) than SiO₂, TiO₂, and h-BN. The main reason behind this behavior is that the cubic crystalline structure of CaF₂ is continuous and free of defects over large regions, which prevents the formation of electrically weak spots.     

Intergenerational Metabolomic Analysis of Mothers with a History of Gestational Diabetes Mellitus and Their Offspring

Shared metabolomic patterns at delivery have been suggested to underlie the mother-to-child transmission of adverse metabolic health. This study aimed to investigate whether mothers with gestational diabetes mellitus (GDM) and their offspring show similar metabolomic patterns several years postpartum. Targeted metabolomics (including 137 metabolites) was performed in plasma samples obtained during an oral glucose tolerance test from 48 mothers with GDM and their offspring at a cross-sectional study visit 8 years after delivery. Partial Pearson’s correlations between the area under the curve (AUC) of maternal and offspring metabolites were calculated, yielding so-called Gaussian graphical models. Spearman’s correlations were applied to investigate correlations of body mass index (BMI), Matsuda insulin sensitivity index (ISI-M), dietary intake, and physical activity between generations, and correlations of metabolite AUCs with lifestyle variables. This study revealed that BMI, ISI-M, and the AUC of six metabolites (carnitine, taurine, proline, SM(-OH) C14:1, creatinine, and PC ae C34:3) were significantly correlated between mothers and offspring several years postpartum. Intergenerational metabolite correlations were independent of shared BMI, ISI-M, age, sex, and all other metabolites. Furthermore, creatinine was correlated with physical activity in mothers. This study suggests that there is long-term metabolic programming in the offspring of mothers with GDM and informs us about targets that could be addressed by future intervention studies.     

Blockchain-oriented dynamic modelling of smart contract design and execution in the supply chain

Recently, the applications of Blockchain technology have begun to revolutionise different aspects of supply chain (SC) management. Among others, Blockchain is a platform to execute the smart contracts in the SC as transactions. We develop and test a new model for smart contract design in the SC with multiple logistics service providers and show that this problem can be presented as a multi-processor flexible flow shop scheduling. A distinctive feature of our approach is that the execution of physical operations is modelled inside the start and completion of cyber information services. We name this modelling concept ‘virtual operation’. The constructed model and the developed experimental environment constitute an event-driven dynamic approach to task and service composition when designing the smart contract. Our approach is also of value when considering the contract execution stage. The use of state control variables in our model allows for operations status updates in the Blockchain that in turn, feeds automated information feedbacks, disruption detection and control of contract execution. The latter launches the re-scheduling procedure, comprehensively combining planning and adaptation decisions within a unified methodological framework of dynamic control theory. The modelling complex developed can be used to design and control smart contracts in the SC.     

Current Status on Stem Cells and Cancers of the Gastric Epithelium

Gastric cancer is still a leading cause of cancer-related mortality worldwide in spite of declining incidence. Gastric cancers are, essentially, adenocarcinomas and one of the strongest risk factors is still infection with Helicobacter pylori. Within the last years, it became clear that gastric self-renewal and carcinogenesis are intimately linked, particularly during chronic inflammatory conditions. Generally, gastric cancer is now regarded as a disease resulting from dysregulated differentiation of stem and progenitor cells, mainly due to an inflammatory environment. However, the situation in the stomach is rather complex, consisting of two types of gastric units which show bidirectional self-renewal from an unexpectedly large variety of progenitor/stem cell populations. As in many other tumors, cancer stem cells have also been characterized for gastric cancer. This review focuses on the various gastric epithelial stem cells, how they contribute to self-renewal and which routes are known to gastric adenocarcinomas, including their stem cells.     

The effect of various fire‐exposed surface dimensions on the spalling of concrete specimens

Concrete spalling due to fire exposure is often defined as the sudden detachment of fragments from a concrete surface. It can be quantified by various parameters of which weight loss and spalling depth are the most common ones. The risk of spalling is influenced by many factors such as concrete composition, heating rate and applied testing methods. A reduced scale testing method should be developed to analyse the spalling behaviour and to understand its effectiveness in more detail. As a subsection of this development, this study aimed to analyse the effect of different‐sized, circular heated areas in semi full‐scale fire tests. Therefore, vermiculite slabs with varying cut‐outs in their centre were placed between a specimen made of a spalling‐sensitive concrete and the combustion chamber. The combustion chamber was heated following a standard fire curve. Our experimental results show that the thermal expansion inside of equal‐sized specimens is strongly dependent on the size of the heated area. In addition, this area also affects thermal stresses. They decrease as a result of lower temperature gradients for tests with smaller unheated boundary areas. Apart from this, the analysis of fragments shows no correlation between their relative volume distribution and the heated area. Copyright © 2014 John Wiley & Sons, Ltd.     

On the optimum design of rotating two-layered composite tubes subject to internal heating or pressure

Subject of this analytical investigation is a rotating two-layered hollow cylinder under generalized plane strain subject to an elevated temperature at the inner surface or to internal pressure. It is presupposed that the inner cylindrical layer consists of the heavier material, whereas the outer layer is made of a material with lower density, like for example in a steel/aluminum tube. Criterion for the maximum permissible stress is the yield criterion by von Mises, and the device is optimized with respect to its weight. It is found that plasticization may start at different radii, and the study provides not only a comprehensive overview of the elastic limits of composite tubes of the above type but also a straightforward procedure for determining the optimum composition.