Dynamic probe of ZnTe(110) surface by scanning tunneling microscopy

The reconstructed surface structure of the II–VI semiconductor ZnTe (110), which is a promising material in the research field of semiconductor spintronics, was studied by scanning tunneling microscopy/spectroscopy (STM/STS). First, the surface states formed by reconstruction by the charge transfer of dangling bond electrons from cationic Zn to anionic Te atoms, which are similar to those of IV and III–V semiconductors, were confirmed in real space. Secondly, oscillation in tunneling current between binary states, which is considered to reflect a conformational change in the topmost Zn–Te structure between the reconstructed and bulk-like ideal structures, was directly observed by STM. Third, using the technique of charge injection, a surface atomic structure was successfully fabricated, suggesting the possibility of atomic-scale manipulation of this widely applicable surface of ZnTe.     

Effect of Talc Size on Surface Roughness and Glossiness of Polypropylene Injection Molding Application to Automotive Plastics

Talc-containing polypropylene (PP) resin is extensively employed in automobiles. Herein, considering the microstructure transfer process in injection molding, the effect of the talc's dispersibility and particle size on this process and its impact on the gloss level of the product were investigated. Results show that a fine unevenness of about several micrometers was self-formed by the shrinkage of PP in nontransferred areas due to the blending of talc. Additionally, the amount of self-formed unevenness tended with an increase in the average particle size of talc. Furthermore, due to PP shrinkage and different densities of talc, it was observed that a fine tiger-stripe pattern was self-formed using special molds with modified microstructure. This self-formed fine unevenness changes the gloss level owing to the diffused light reflection effect. This study proposes controlling this change by controlling the average particle size of talc and structure of the mold. POLYM. ENG. SCI., 60:132–139, 2020. © 2019 Society of Plastics Engineers     

Application of Near-Infrared Spectroscopy for Evaluation of Drying Stress on Lumber Surface: A Comparison of Artificial Neural Networks and Partial Least Squares Regression

This study aimed to examine the feasibility of evaluating the stress level at the surface of lumber during drying using near-infrared (NIR) spectroscopy combined with artificial neural networks (ANNs). Sugi (Cryptomeria japonica D. Don) lumber with an initial moisture content ranging from 41.1 to 85.8% was dried using a commercial drying schedule. An ANN model for predicting surface-released strain (SRS) was developed based on NIR spectra collected from the lumber during drying. The predictive ability of the ANN model was compared with a partial least squares (PLS) regression model.

The ANN model showed good correlation between laboratory-measured SRS and predicted SRS with an R ² of 0.79, a root mean square error of prediction (RMSEP) of 0.0009, and a ratio of performance to deviation (RPD) of 1.81. The PLS regression model gave a lower R ² of 0.69, a higher RMSEP of 0.0010, and a lower RPD of 1.38 than the ANN model, suggesting that the predictive performance of the ANN model was superior to the PLS regression model. The SRS evolution during drying as predicted by the models showed a similar trend to the laboratory-measured one. The predicted elapsed times to reach maximum tensile SRS and stress reversal roughly coincided with the laboratory-measured times. These results suggest that NIR spectroscopy combined with multivariate analysis has the potential to predict the drying stress level on the lumber surface and the critical periods during drying, such as the points of maximum tensile stress and stress reversal.     

Relationship between Expression of Onco-Related miRNAs and the Endoscopic Appearance of Colorectal Tumors

Accumulating data indicates that certain microRNAs (miRNAs or miRs) are differently expressed in samples of tumors and paired non-tumorous samples taken from the same patients with colorectal tumors. We examined the expression of onco-related miRNAs in 131 sporadic exophytic adenomas or early cancers and in 52 sporadic flat elevated adenomas or early cancers to clarify the relationship between the expression of the miRNAs and the endoscopic morphological appearance of the colorectal tumors. The expression levels of miR-143, -145, and -34a were significantly reduced in most of the exophytic tumors compared with those in the flat elevated ones. In type 2 cancers, the miRNA expression profile was very similar to that of the exophytic tumors. The expression levels of miR-7 and -21 were significantly up-regulated in some flat elevated adenomas compared with those in exophytic adenomas. In contrast, in most of the miR-143 and -145 down-regulated cases of the adenoma-carcinoma sequence and in some of the de novo types of carcinoma, the up-regulation of oncogenic miR-7 and/or -21 contributed to the triggering mechanism leading to the carcinogenetic process. These findings indicated that the expression of onco-related miRNA was associated with the morphological appearance of colorectal tumors.     

Determination of γ-glutamyl-valyl-glycine in raw scallop and processed scallop products using high pressure liquid chromatography–tandem mass spectrometry

The determination of the kokumi peptide, γ-glutamyl-valyl-glycine (γ-Glu-Val-Gly) in raw scallop and processed scallop products was carried out using high pressure liquid chromatography–tandem mass spectrometry (LC/MS/MS). The detection of γ-Glu-Val-Gly was achieved using a multiple reaction monitoring (MRM) method. The optimised condition enabled the precise determination of γ-Glu-Val-Gly. Raw scallop contained 0.08 μg/g γ-Glu-Val-Gly, and the γ-Glu-Val-Gly levels in processed scallop products, such as dried-scallop and scallop extract, were measured to be 0.64 and 0.77 μg/g, respectively. This is the first report to confirm the existence of γ-Glu-Val-Gly in foodstuff.     

Effects of Particle Strength of Feedstock Powders on Properties of Warm-Sprayed WC-Co Coatings

Warm spray (WS) process, which can control the temperature of a combustion gas jet used to propel powder, has been successfully applied to deposit WC-Co coatings. Detrimental reactions resulting from dissolution of WC into Co binder and decarburization were suppressed effectively by keeping the WC-Co particles’ temperature below the m.p. of the binder phase. In this study, three nano-structured WC-12Co powders with different particle strengths were prepared by changing the sintering conditions of spray-dried powder and were deposited by WS. The deposition efficiency and porosity of the coatings decreased with increasing the particle strength. The coating deposited from the powder with very low particle strength showed significant phase changes, while those deposited from the higher particle strengths showed almost no change. Particle Image Velocimetry revealed significant disintegration of the weakest powder, which explains the changes observed. The hardness and wear properties of the former coating, therefore, were inferior to the other two.     

Preparation of raspberry‐like poly(methyl methacrylate) particles by seeded dispersion polymerization

The facile preparation of nonspherical raspberry‐like poly(methyl methacrylate) (PMMA) particles by seeded dispersion polymerization of methyl methacrylate (MMA) on micron‐sized PMMA seed particles was described. Various polymerization parameters influencing the particle morphology, as well as the polymerization kinetic and morphological stability, were investigated in detail. It was found that the following polymerization conditions were necessary to prepare this kind of nonspherical particles: a relatively low temperature, an appropriate ratio of seed/MMA, an initiator with a relatively low decomposition rate, and a relatively low initiator concentration. These particles showed very good morphological stability at room temperature, but they changed to the spherical ones when heat treated at 60°C in methanol solution of MMA. The experimental results suggest that the prepared PMMA particles were kinetically favored and the localized polymerization of the MMA monomer on PMMA seed particle surface was responsible for the formation of the raspberry‐like particles. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Polymer electrolyte membrane with nanomatrix channel prepared by sulfonation of natural rubber grafted with polystyrene

High‐proton‐conductive polymer electrolyte with a nanomatrix channel was prepared by graft copolymerization of styrene onto deproteinized natural rubber followed by sulfonation with chlorosulfonic acid. First, natural rubber latex was purified with urea in the presence of surfactant to remove almost all proteins present in the rubber. Second, graft copolymerization of styrene onto deproteinized natural rubber was carried out with tert‐butyl hydroperoxide/tetraethylenepentamine as an initiator at 30°C in latex stage. The graft‐copolymerized natural rubber (DPNR‐graft‐PS) was sulfonated with chlorosulfonic acid in chloroform solution at an ambient temperature. The resulting sulfonated DPNR‐graft‐PS was characterized by FTIR spectroscopy, solid state ¹³C CP/MAS NMR spectroscopy, elemental analysis, and transmission electron microscopy. High proton conductivity of about 0.1 S/cm, less water uptake of 24 wt % and comparatively good stress at break of 9 MPa were accomplished at suitable contents of styrene units and sulfur, i.e., 32 wt % and 75 mol %, respectively. The high proton conductivity, excellent stability, and good mechanical properties were associated with not only the formation of the nanomatrix channel but also a specific concentration of sulfuric acid group. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Synthesis and polymerization of maleimide-type new macromonomer with polystyrene having controlled chain length

A new reactive and functionalized polystyrene with a maleimide moiety at the one polymer end was synthesized with N-(4-(1-chloroethyl)pheyl)maleimide (CEPMI)/SnCl₄/tetra-butylammonium chloride (TBAC) initiating system. The polymer obtained with the CEPMI/SnCl₄/TBAC initiating system under the condition of [TBAC]/[SnCl₄] = 1 was to be maleimide-type macromonomer with polystyrene having controlled molecular weight of polystyrene (VI). VI could be polymerized with anionic and radical initiators to give new type graft polymer (poly[N-(4-ethylphenyl)maleimide]-graft-polystyrene) with controlled chain length with respect to side chains.