Antifungal activity of lauric acid derivatives against Aspergillus niger

The antifungal effects of lauric acid and four lauric acid derivatives (monolauroylglycerol, D-laurate A, T-laurate A, 6-O-lauroysucrose) were tested on the spore germination and the growth rate of Aspergillus niger DMF 0801. The results showed that the tested substances varied in their antifungal activity and they also confirmed the relation of the structure of tested substances and their antifungal effects. Monolauroylglycerol at concentration level between 0.2 and 1.8 mmol l^-1 caused the highest inhibition of spore outgrowths whereas 6-O-lauroysucrose at concentration between 0.05 and 1.8 mmol l^-1 did not exhibit inhibition of spore germination. The inhibition of colony growth rate was detected mainly at presence of 6-O-lauroysucrose.     

Effect of noble metals in the decomposition of nitrous oxide over Fe-ferrierites

The decomposition of nitrous oxide was studied over Fe-ferrierite, Me-ferrierites and Fe/Me-ferrierites (Me: Pt, Rh and Ru). Flow as well as batch experiments were carried out and showed a synergy between Fe and Me ions. Ions of noble metals in Fe-ferrierite increased the catalytic activity in the sequence Pt < Rh ≅ Ru. Addition of NO substantially decreased the decomposition of N₂O over Rh/ferrierite and Ru/ferrierite, but not over bimetallic ferrierites. NO _x species created during the decomposition of nitrous oxide alone as well as with addition of NO, and employment of nitrous oxide labeled with ¹⁸O allowed us to assume a changing decomposition mechanism in the presence of Me ions in Fe-ferrierites.     

Development of Real-time PCR Assays for the Detection of the <Emphasis Type="Italic">pin</Emphasis> II Terminator (t<Emphasis Type="Italic">pin</Emphasis>II) Used in GM Constructs and Its Donor Organism,Potato (<Emphasis Type="Italic">Solanum tuberosum</Emphasis>)

Two singleplex TaqMan methods were developed for the detection of potato targets: one for the detection of the tpinII terminator, which is an emerging terminator used in GM constructs, and one for the detection of the endogenous StLS gene of potato. Performance criteria such as specificity and sensitivity were successfully tested for the two methods, taking into account the recommendations of international guidelines. The presence of the StLS target was checked in 16 potato cultivars. The StLS target is present at low copy number and can be used for quantitation purposes, as demonstrated on transgenic potatoes in this paper. The StLS target is an excellent candidate to replace the presently recommended endogenous target based on the UGP gene, which shows several disadvantages due to its high copy number and lack of specificity. The research also indicates that DNA can easily be extracted from different parts of potato tubers with a classical cetyltrimethylammonium bromide method.     

Antibacterial modification of nylon-6 nanofibers: structure,properties and antibacterial activity.

Antibacterial nylon 6 (PA6) nanofibers have been prepared in one-step procedure using Nanospider technology. Chlorhexidine (CHX), 1-dodecyltrimethylamonium bromide (DTAB) and benzyltrimethylamonium bromide (BTAB) have been used as antibacterial agents. Samples were characterized by a series of analytical and testing methods to investigate the surface chemistry, zeta potential, structure, morphology, phase composition, mechanical properties and antibacterial activity. Experimental characterization has been combined with molecular modeling to analyze the interaction of nanofibers with modifying molecules for better understanding the effect of nanofibers modification on their properties. Antibacterial modification of PA6 led to significant changes of zeta potential (from -31 mV for PA 6 up to -49 mV for PA6/BTAB), changes in phase composition (decrease of alpha phase content and increase of gamma phase content for PA6/BTAB and PA6/CHX) and to significant increase of fiber diameter for PA6/BTAB. Antibacterial modification resulted in the straightening of nanofibers and to higher permeability of nanofiber textile for all investigated samples. Tensile tests showed the the increase of Young modulus for all the investigated samples. All the modified samples: PA6/DTAB, PA6/BTAB and PA6/CHX exhibit good antibacterial activity.     

A novel method for biopolymer surface nanostructuring by platinum deposition and subsequent thermal annealing

A novel procedure for biopolymer surface nanostructuring with defined surface roughness and pattern dimension is presented. The surface properties of sputtered platinum layers on the biocompatible polymer poly(l-lactic acid) (PLLA) are presented. The influence of thermal treatment on surface morphology and electrical resistance and Pt distribution in ca. 100 nm of altered surface is described. The thickness, roughness and morphology of Pt structures were determined by atomic force microscopy. Surface sheet resistance was studied by a two-point technique. It was the sequence of Pt layer sputtering followed by thermal treatment that dramatically changed the structure of the PLLA’s surface. Depending on the Pt thickness, the ripple-like and worm-like patterns appeared on the surface for thinner and thicker Pt layers, respectively. Electrokinetic analysis confirmed the Pt coverage of PLLA and the slightly different behaviour of non-annealed and annealed surfaces. The amount and distribution of platinum on the PLLA is significantly altered by thermal annealing.     

Polymer-clay nanocomposites prepared via in situ emulsion polymerization

A series of novel polystyrene and poly(butyl methacrylate) montmorillonites (MMT-Na) nanocomposite latexes have been successfully prepared by emulsion polymerization. First of all, chemical modification of MMT-Na with a reactive coupling agent (MMT-QS) has been employed for the synthesis of hybrids. Subsequently, in situ seeded emulsion polymerization of hydrophobic vinyl monomers, such as butyl methacrylate and styrene, using sodium dodecyl sulfate (SDS) and ammonium persulfate (APS) as surfactant and initiator, respectively, were used for nanocomposite preparation. This technique allowed preparing of stable nanocomposite latexes with high (30–45 wt.%) solids contents and with loading of inorganic particles up to 5 wt.%. The prepared wet dispersions were subsequently characterized by light scattering method. In order to characterize the microstructure of the clay layers, and that of the organoclay in polystyrene and poly(butyl methacrylate) nanocomposites, wide and small angle X-ray analyses (WAXS, SAXS) and transmission electron microscopy (TEM) techniques were used.     

Grafting of bovine serum albumin proteins on plasma-modified polymers for potential application in tissue engineering

In this work, an influence of bovine serum albumin proteins grafting on the surface properties of plasma-treated polyethylene and poly-l-lactic acid was studied. The interaction of the vascular smooth muscle cells with the modified polymer surface was determined. The surface properties were characterized by X-ray photoelectron spectroscopy, atomic force microscopy, nano-LC-ESI-Q-TOF mass spectrometry, electrokinetic analysis, and goniometry. One of the motivations for this work is the idea that by the interaction of the cell with substrate surface, the proteins will form an interlayer between the cell and the substrate. It was proven that when interacting with the plasma-treated high-density polyethylene and poly-l-lactic acid, the bovine serum albumin protein is grafted on the polymer surface. Since the proteins are bonded to the substrate surface, they can stimulate cell adhesion and proliferation.     

Surface properties of poly(ethylene terephthalate) foils of different thicknesses

Surface properties of commercially available poly(ethylene terephthalate) (PET) foils of different thicknesses (3, 13, 23, 50, and 100 μm) were characterized using different analytical methods. Surface roughness and morphology were determined by atomic force microscopy, goniometry was used for determination of contact angle (wettability of surface) and electrokinetical analysis (zeta potential) for characterization of surface polarity and conductivity. X-ray photoelectron spectroscopy was used for characterization of PET surface chemistry. Infrared spectroscopy and differential scanning calorimetry (DSC) were used for determination of crystallinity portion. By DSC analysis, it was confirmed that the crystallinity portion depends on the foil thickness. Most important result of this study is that the surface properties of PET foils depend not only on the foil thickness but also on the foil side under study. This finding may be of importance for future experiments performed on PET foils and for their application in tissue engineering or microelectronics.