化工冶金学家陈家镛

1958年中国科学院化工冶金研究所(现过程工程研究所)的创建,与建国初期的国家经济发展和国防建设的需求紧密相关。1956年陈家镛受到世界著名冶金学家叶渚沛的邀请,到正在筹建中的化工冶金研究所工作。作为国内该领域开拓者和学术带头人,陈家镛院士的学术经历是本文主线。以他带领同事们开展湿法冶金研究为案例,分析了国家重大战略需求与科学技术研究之间的关系。重点介绍了他在冶金、化工、材料等研究领域做出的重要学术贡献,以及将代表性科研成果经过中间试验应用于实际生产、解决企业所面临的技术难题的情况。藉此反映了以过程工程研究所为代表的国立科研机构,围绕国家重大战略需求开展科技攻坚的历程与成果。     

多相搅拌槽内宏观混合研究进展

多相搅拌槽反应器广泛应用于化工、冶金等过程工业中,而多相混合状态对于多相搅拌槽反应器的设计、优化和放大具有重要意义.混合时间是表征其宏观混合过程的一个重要参数.文中从实验和数值模拟二方面对多相搅拌槽反应器的液相混合时间研究进行综述,对气液、液固、液液、气液固4种体系的多相搅拌槽进行了分类总结,讨论了分散相、桨型、转速、...     

Numerical solution of viscous flow past a solid sphere with the control volume formulation

The control volume formulation with the QUICK finite difference scheme is used to solveincompressible liquid flow past a solid sphere in terms of stream function and vorticity.Several tech-nical points are addressed on improving the accuracy and efficiency of numerical simulation of similarproblems of fluid flow.In particular,the importance of suitable specification of the distortion func-tion to enforcing the far field boundarv conditions is emphasized.     

镜像流体法模拟单颗粒沉降和绕凸起物流动

提出一种新的计算流体力学方法,即镜像流体法,通过指定固体区域内的流场参数,使相界面边界条件隐含满足,使得固液两相运动可以在固定的欧拉坐标系中求解。采用SIMPLE算法和控制容积法离散控制微分方程组。利用镜像流体方法数值模拟了单个球形颗粒的自由沉降过程,以及幂律流体、Carreau-Bird流体和粘弹性的Oldroyd-B流体绕半圆环形、三角形和梯形凸起物的二维圆管流动问题,模拟结果与报道的实验数据及计算结果很接近,初步验证了本算法的可靠性。     

微生物脱砷预处理难冶含砷金矿提金的研究

用化能自养的氧化铁硫杆菌和氧化硫硫杆菌，对河北半壁山含砷金精矿进行了公斤级的预处理氧化脱砷实验．在细菌预处理反应器中的连续和批式脱砷实验表明，目前选育的菌种是有效的．严格控制工艺条件，可以在4天左右便脱砷率高于80％．后续氰化提金实验证实，金的总回收率可达90％以上．用微生物脱砷预处理难冶含砷金矿有金浸出率高、便于固定浸出的砷、免除对环境污染的优点，是有很好应用前景的处理难冶含砷金矿的技术路线．     

NONUNIFORMITY OF TWO PHASE FLOW IN CAPILLARY SYSTEMS

Gas-liquid flow in simple systems consisting of capillaries is analyzed by theory of irreversible thermodynamics so as to shed light on induction of nonuniformity of multiphase flow. By the Prigogine's theorem of minimum entropy production, stability of uniform two-phase flow and possible transition to nonuniform distribution are discussed. The analysis of model systems suggests potential application of irreversible thermodynamics to research of multiphase hydrodynamics in chemical reactors.     

IMPROVED HYDRODYNAMIC MODEL OF TWO-PHASE SLUG FLOW IN VERTICAL TUBES

Merits of the Fernandes model(Fernandes et al.1983)for two-phase slug flow in verticaltubes are reviewed in this paper.While predicting many macroscopic parameters of slug flow in verti-cal tubes,it fails to present correctly the trend that the average voidage in liquid slugs increases asthe rising velocity of Taylor bubbles is increased.It is also desirable to extend its application toelectrolyte systems, and to churn flow conditions.Based on the diagnostic analysis,the model equa-tion for gas entrainment by falling liquid film is reformulated and the influence of surface tension isalso accounted for.Development of the falling liquid film is recognized in the revised model in or-der to suit the case of short Taylor bubbles as well.The modified model predicts the variation of av-erage voidage in liquid slugs in good agreement with available experimental data.     

粗糙固体平面上液滴的接触角滞后的简单流体静力学模型

The phenomenon of hysteresis of contact angle is an important topic subject to a long time of argument.A simple hydrostatic model of sessile drops under the gravity in combination with an ideal surface roughness model is used to interpret the process of drop volume increase or decrease of a planar sessile drop and to shed light on the contact angle hysteresis and its relationship with the solid surface roughness. With this model, the advancing and receding contact angles are conceptually explained in terms of equilibrium contact angle and surface roughness only,without invoking the thermodynamic multiplicity. The model is found to be qualitatively consistent to experimental observations on contact angle hysteresis and it suggests a possible way to approach the hysteresis of three-dimensional sessile drops.     

表面活性剂溶液中单液滴的非稳态运动

A numerical investigation of the unsteady motion of a deformed drop released freely in another quiescent liquid contaminated by surfactant is presented in this paper. The finite difference method was used to solve numerically the coupled time-dependent Navier-Stokes and convective-diffusion equations in a body-fitted orthogonal coordinate system. Numerical simulation was conducted on the experimental cases, in which MIBK drops with the size ranging from 1.24 mm to 1.97 mm rose and accelerated freely in pure water and in dilute sodium dodecyl sulphate (SDS) aqueous solution. The applicability of the numerical scheme was validated by the agreement between the simulation results and the experimental data. Both the numerical and experimental results showed that the velocitytime profile exhibited a maximum rising velocity for drops in SDS solutions, which was close to the terminal velocity in pure water, before it dropped down to a steady-state value. The effect of the sorption kinetics of surfactant on the accelerating motion was also evaluated. It is also suggested that introduction of virtual mass force into the formulation improved obviously the precision of numerical simulation of transient drop motion.     

滴流床中固相润湿分数的实验研究

用表面镀镍的填料颗粒化过氧化分解的化学反应法，测定了内径７５ｍｍ的滴流床中固体填料的外润湿分数，实验结果表明，润湿分数随表现气速和液速的增加而增加，降低液体的表面张力，增大粘度也有利于提高润湿分数，当表现液速达到５ｋｇ／（ｍ＾２．ｓ）时，固体填料基本上完全润湿，这与文献报道和作者数值模拟结论一致。