子集模拟中马尔可夫链蒙特卡洛抽样算法比较

文章着重研究子集模拟中马尔可夫链蒙特卡洛(MCMC)抽样算法的抽样效率与计算精度。首先，阐述可靠度子集模拟的基本原理与中间状态样本生成的各种MCMC抽样算法，在稳态马尔可夫链构造基础上提出延迟拒绝MMH(Modified Metropolis Hasting)算法，通过在MMH算法上增加备选样本的延迟拒绝步提高MMH算法的抽样效率；阐述基于随机游走与基于扩散方程MCMC方法中建议分布的差异，进一步对备选样本接受率为1的preconditioned Crank-Nicolson(pCN)算法和条件抽样(Conditional sampling, CS)算法开展研究，证明两种算法的等价性；推导有效样本量的计算方法，提出采用有效样本量与总样本量的比值定义MCMC方法的抽样效率。通过复杂目标分布的样本生成研究不同MCMC抽样算法建议分布及其参数对备选样本接受率与抽样效率的影响，最后通过计算实例研究子集模拟过程采用不同MCMC抽样算法得到失效概率的相对误差及其变异性，揭示不同MCMC抽样算法对失效概率计算精度的影响。研究表明：不同MCMC抽样算法生成备选样本的接受率及其自相关性受建议分布及其参数影响较大，对于复杂的目标分布，pCN算法和CS算法的抽样效率较高，延迟拒绝MMH算法次之；采用CS算法和延迟拒绝MMH算法进行子集模拟得到的失效概率精度较高且变异性较低；增加子集模拟中间状态样本量可以提高失效概率计算精度并降低其变异性。     

Spatial–Temporal Fusion Based Path Planning for Source Seeking in Wireless Sensor Network

International Journal of Wireless Information Networks - Source seeking problem has been faced in many fields, especially in search and rescue applications. We proposed a virtual structure-based...     

Stabilization for Schrödinger Equation with Internal Damping and Boundary Disturbance

In this paper, the stabilization for Schrödinger equation subject to internal damping and boundary disturbance at the control end is investigated. Due to its immeasurability, the nonlinear observer system is designed to obtain the state information, and the existence of weak solution and its convergence for the nonlinear observer system are proved. The feedback control is realized by the backstepping transformation. In addition, the adaptive disturbance rejection control is applied to estimate the disturbance. According to the observer and disturbance estimation, the feedback control is finally designed to stabilize the system asymptotically.

     

一种结合显式特征和隐式特征的开发者混合推荐算法

现有开发者推荐算法通过对任务和开发者的显式信息进行挖掘,抽取任务和开发者的显式特征,完成针对任务的开发者推荐.然而,由于显式信息中的描述信息是主观的,往往是不精确的,现有基于显式特征的开发者推荐算法性能不够理想.众包软件开发平台除包含大量不精确的描述信息外,还包含客观的、较准确的“任务—开发者”成绩信息,可以有效地推断任务和开发者的隐式特征.考虑到隐式特征作为显式特征的补充,将有效缓解描述信息不精确的难题,提出一种结合显式特征和隐式特征的开发者混合推荐算法.首先,利用任务和开发者的平台可见信息充分提取显式特征,提出面向显式特征的因子分解机(FM)推荐模型建模任务、开发者显式特征和相应评分的映射关系.然后,利用“任务—开发者”成绩矩阵提取隐式特征,提出面向隐式特征的矩阵分解(MF)推荐模型.最后,融合面向显式特征的FM推荐模型和面向隐式特征的MF推荐模型,提出多层感知器融合算法.进一步,针对冷启动问题,首先,基于历史数据,构建多层感知器模型建模显式特征到隐式特征的映射关系.然后,针对冷启动任务或冷启动开发者,通过任务或开发者的显式特征求解相应的隐式特征.最后,基于已训练好的多层感知器融合...     

Dynamic voltage scaling based energy-minimized partial task offloading in fog networks

Wireless Networks - With the dynamic voltage scaling (DVS) technology, the terminal node (TN) can dynamically adjust its computational speed, thus providing a new way to save energy during task...     

Graph-Theoretic Method on Topology Identification of Stochastic Multi-weighted Complex Networks with Time-Varying Delayed Coupling Based on Adaptive Synchronization

Neural Processing Letters - This paper is concerned with topology identification of stochastic multi-weighted complex networks based on adaptive synchronization. Different from previous work,...     

Effects of structural parameters on water film properties of transpiring wall reactor

Corrosion and salt deposition problems severely restrict the industrialization of supercritical water oxidation. Transpiring wall reactor can effectively weaken these two problems by a protective water film. In this work, methanol was selected as organic matter, and the influences of vital structural parameters on water film properties and organic matter removal were studied via numerical simulation. The results indicate that higher than 99% of methanol conversion could be obtained and hardly affected by transpiration water layer, transpiring wall porosity and inner diameter. Increasing layer and porosity reduced reactor center temperature, but inner diameter's influence was lower relatively. Water film temperature reduced but coverage rate raised as layer, porosity, and inner diameter increased. Notably, the whole reactor was in supercritical state and coverage rate was only approximately 85% in the case of one layer. Increasing reactor length affected slightly the volume of the upper supercritical zone but enlarged the subcritical zone.     

盾构隧道施工物料无人运输发展现状及关键技术

盾构隧道施工物料无人运输有助于提升运输效率、降低运输成本、减少运输安全事故率。与公路汽车无人驾驶、港口车辆无人驾驶、轨道交通无人驾驶等逐步成熟的无人驾驶技术不同，在隧道场景下实施施工物料无人运输存在运输物料种类繁多、运输调度困难、地下定位信号拒止、狭窄车道频繁会车、行车路面工况复杂、地上地下联动响应慢等诸多挑战。从实现盾构隧道施工物料无人运输的关键问题分析入手，综述当前盾构隧道施工物料运输方式、运输需求、无人运输发展现状及存在的挑战，提出盾构隧道施工物料无人运输的五大关键技术：多种类物料智能货控能效管理技术，无人化垂直装卸门机控制技术，多传感器融合同步定位与地图构建技术，隧道复杂环境路径规划与自主避障技术，隧-地一体化联动响应的高可靠性无线通信技术。