Metformin Preserves β-Cell Compensation in Insulin Secretion and Mass Expansion in Prediabetic Nile Rats

Prediabetes is a high-risk condition for type 2 diabetes (T2D). Pancreatic β-cells adapt to impaired glucose regulation in prediabetes by increasing insulin secretion and β-cell mass expansion. In people with prediabetes, metformin has been shown to prevent prediabetes conversion to diabetes. However, emerging evidence indicates that metformin has negative effects on β-cell function and survival. Our previous study established the Nile rat (NR) as a model for prediabetes, recapitulating characteristics of human β-cell compensation in function and mass expansion. In this study, we investigated the action of metformin on β-cells in vivo and in vitro. A 7-week metformin treatment improved glucose tolerance by reducing hepatic glucose output and enhancing insulin secretion. Although high-dose metformin inhibited β-cell glucose-stimulated insulin secretion in vitro, stimulation of β-cell insulin secretion was preserved in metformin-treated NRs via an indirect mechanism. Moreover, β-cells in NRs receiving metformin exhibited increased endoplasmic reticulum (ER) chaperones and alleviated apoptotic unfold protein response (UPR) without changes in the expression of cell identity genes. Additionally, metformin did not suppress β-cell mass compensation or proliferation. Taken together, despite the conflicting role indicated by in vitro studies, administration of metformin does not exert a negative effect on β-cell function or cell mass and, instead, early metformin treatment may help protect β-cells from exhaustion and decompensation.     

Dynamic optimization for gas blending in pipeline networks with gas interchangeability control

The increasing penetration of unconventional gas and liquefied natural gas poses an operational challenge on existing regional gas networks for gas quality problems. A new dynamic model for natural gas pipeline network with multiple supplies is presented with a special emphasis on gas interchangeability control. Wobbe index serves as gas interchangeability indicator and is calculated by equations derived from rigorous composition-based partial differential equations. Disjunctive formulation is applied to represent different modes of gas blending due to gas reversal, and the disjunctive model is then reformulated as a nonsmooth model with min/max and absolute value functions, which is solved by a gradient-based nonlinear program solver after smooth approximation. Moreover, a heuristic algorithm is proposed to tune the penalty parameters in order to focus on different penalty terms while keeping the model well-conditioned. The developed model and strategy are first tested with a small pipeline network model and then extended to a large model. The results show that the model can effectively manage gas interchangeability issues in pipeline networks within reasonable CPU time.     

Fabrication of Ti3SiC2-based pastes for screen printing on paper-derived Al2O3 substrates

This paper describes the development and fabrication of pastes suitable for screen printing process using Ti₃SiC₂ as the ceramic filler and ethyl cellulose as the binder. With the aim of obtaining high quality screen printed films, the influence of different amounts of Ti₃SiC₂ filler (20–40?vol%) and binder (0–5?vol%) on the rheological properties of the pastes was investigated. Samples with higher viscosity, such as pastes containing 30?vol% and 40?vol% Ti₃SiC₂ filler, regardless of the amount of ethyl cellulose, showed a higher printing quality compared to the samples with other compositions. The different paste compositions were screen printed onto paper-derived Al₂O₃ substrates containing 28.6 ± 4.8% open porosity and sintered for 1?h under an argon atmosphere at 1600?°C. X-ray diffraction (XRD) measurements and scanning electron microscopy (SEM) analysis showed that the sintered films contained TiC as a primary phase and Ti₃SiC₂ as a secondary phase. The partial decomposition of Ti₃SiC₂ after sintering can be attributed to residual carbon from the organic additives, which decreases the thermal stability of this material.     

Chromatographic characterisation of aptamer-modified poly(EDMA-co-GMA) monolithic disk format for protein binding and separation

The introduction of aptameric ligands onto disk-monolithic adsorbent, representing a unique strategy for convective isolation of target molecules with high specificity and selectivity, is investigated for the first time. Experimental results showed that the disk monolith possessed a good permeability of 1.67 ± 0.05 × 10^–14 m² (RSD = 3.2%). The aptameric ligand density for the aptamer-modified disk monolith was 480 pmol/uL. Chromatographic analysis of the aptamer disk-monolith efficiency showed an optimum linear velocity of 126 cm/min (≈0.25 mL/min) at room temperatures 25 ± 2°C. The theoretical number of plates corresponding to the optimum linear velocity was 128.2 with an height equivalent to the theoretical plate of 0.022 mm. The disk aptamer-immobilised monolithic system demonstrated good selectivity and isolation of thrombin from non-targets.     

Comparison of Canola and Soy Flour with Added Isocyanate as Wood Adhesives

Canola is widely grown in the northern latitudes for its vegetable oil, generating large quantities of residual, low value canola flour used as animal feed. The common wood adhesive poly(diphenylmethylene diisocyanate) (pMDI) should react with the wide variety of functional groups in proteins. Therefore, it would seem that canola flour with added pMDI could be an effective adhesive. Two main questions are addressed in this study: How do the wood adhesive properties of canola flour compare to the better-studied soy flour? How well do proteins, which contain an abundance of functional groups, cure with the very reactive pMDI? These questions were addressed using the small-scale adhesive strength test ASTM D-7998, with various adhesive formulations and bonding conditions for canola flour plus pMDI compared to soy adhesives. The more challenging wet cohesive bond strength was emphasized because the dry strengths were usually very good. Generally, soy adhesives were better than canola ones, as was the polyamidoamine-epichlorohydrin cross-linker compared to pMDI, but these generalizations can be altered by the conditions selected. Three-ply plywood tests supported the small-scale test results.     

Hot corrosion of TBC-coated components upon combustion of low-sulfur fuels

Gas turbine reliability is a crucial requirement for passenger safety in aviation and a secure energy supply. Hence, corrosive degradation of combustor parts, vanes, and blades in gas turbines must be prevented. One of the most severe forms of corrosion is alkali-sulfate-induced hot corrosion, which is associated with internal sulfidation of components and is usually anticipated to fade in importance in the absence of sulfur. However, the literature suggests that hot corrosion might still occur in low-sulfur combustion gases. In this study, established thermodynamic modeling methods are used to analyze the low-sulfur hot corrosion regime. Liquid sodium chromate is found to be stable in these conditions. A comparison of calculation results and engine findings suggests that high alkali levels can negatively impact thermal barrier coating life even if sulfur is absent in the fuel. Laboratory tests are carried out to validate the chromate formation on MCrAlY-coated specimens. It is shown that molten sodium chromate can alter the oxidation behavior of MCrAlY, promoting the formation of voluminous spinel. This represents a new and different form of hot corrosion compared to type I hot corrosion.     

Designing oligomeric ethylene terephtalate building blocks by chemical recycling of polyethylene terephtalate

The intelligent recycling of plastics waste is a major concern. Because of the widespread use of polyethylene terephtalate, considerable amounts of PET waste are generated that are ideally re‐introduced into the material cycle by generating second generation products without loss of materials performance. Chemical recycling methods are often expensive and entail environmentally hazardous by‐products. Established mechanical methods generally provide materials of reduced quality, leading to products of lower quality. These drawbacks can be avoided by the development of new recycling methods that provide materials of high quality in every step of the production cycle. In the present work, oligomeric ethylene terephthalate with defined degrees of polymerization and defined molecular weight is produced by melt‐mixing PET with different quantities of adipic acid as an alternative pathway of recycling PET with respect to conventional methods, offering ecofriendly and economical aspects. Additionally, block‐copolyesters of defined block length are designed from the oligomeric products. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39786.     

Simple N‐Heterocyclic Carbenes as Ligands in Ullmann‐Type Ether and Thioether Formations

A simple N‐heterocyclic carbene (NHC) derived from 1‐methyl‐3‐ethylimidazolium tetrafluoroborate was found to be an efficient ligand for a range of copper‐catalyzed cross‐coupling reactions, leading to the formation of aromatic ethers and thioethers.

     

电-气式循环加荷系统

本文评论对土试件施加循环荷载的某些常用系统。介绍它们的主要特征和操作原理。详细介绍加州大学贝克莱分校新近制成的价格比较低廉的加荷系统。这种系统由电子控制的压缩空气产生正弦和其他形式的荷载,并用很易购得的部件装配而成。