Solar light-driven reduction of crystal violet by a composite of g-C3N4, β-Ag2Se, γ-Fe2O3 and graphite

Abstract

In this work, a new g-C₃N₄-based Z-scheme with γ-Fe₂O₃ and β-Ag₂Se both n-type semiconductors, and graphite to favor electron exchange is presented. The composite material was studied by XRD, FTIR, UV-Vis, TEM, XPS, TGA, DSC and TOF-SIMS, and the ability of this photocatalytic system to act as a photo-reductant was assessed using crystal violet (CV⁺) dye. Solar light driven photo-reduction of CV⁺ in the presence of tri-sodium citrate evidenced a synergistic enhancement of the activity of the composite toward reduction, with ～20 times higher conversion rates per unit of surface area than those of g-C₃N₄. Photo-oxidation experiments under Xe lamp irradiation in the presence of H₂O₂ also showed that the AgFeCN composite featured a higher activity (～8×) than g-C₃N₄. This Z-scheme may deserve further study as a photo-reductant to obtain hydrogen or hydrogenated compounds. Moreover, the use of CV⁺ may represent a facile procedure that can aid in the selection of new photocatalysts to be used in hydrogen production.     

Betweenness estimation in OLSR-based multi-hop networks for distributed filtering

In traditional networks special efforts are put to secure the perimeter with firewalls: particular routers that analyze and filter the traffic to separate zones with different levels of trust. In wireless multi-hop networks the perimeter is a concept extremely hard to identify, thus, it is much more effective to enforce control on the nodes that will route more traffic. But traffic filtering and traffic analysis are costly activities for the limited resources of mesh nodes, so a trade-off must be reached limiting the number of nodes that enforce them. This work shows how, using the OLSR protocol, the centrality of groups of nodes with reference to traffic can be estimated with high accuracy independently of the network topology or size. We also show how this approach greatly limits the impact of an attack to the network using a number of firewalls that is only a fraction of the available nodes.     

A Novel Magnetic Hardening Mechanism for Nd-Fe-B Permanent Magnets Based on Solid-State Phase Transformation

Permanent magnets based on neodymium-iron-boron (Nd-Fe-B) alloys provide the highest performance and energy density, finding usage in many high-tech applications. Their magnetic performance relies on the intrinsic properties of the hard-magnetic Nd₂Fe₁₄B phase combined with control over the microstructure during production. In this study, a novel magnetic hardening mechanism is described in such materials based on a solid-state phase transformation. Using modified Nd-Fe-B alloys of the type Nd₁₆Fe_bal-x-y-zCo_xMo_yCu_zB₇ for the first time it is revealed how the microstructural transformation from the metastable Nd₂Fe₁₇B_x phase to the hard-magnetic Nd₂Fe₁₄B phase can be thermally controlled, leading to an astonishing increase in coercivity from ≈200 kAm⁻¹ to almost 700 kAm⁻¹. Furthermore, after thermally treating a quenched sample of Nd₁₆Fe₅₆Co₂₀Mo₂Cu₂B₇, the presence of Mo leads to the formation of fine FeMo₂B₂ precipitates, in the range from micrometers down to a few nanometers. These precipitates are responsible for the refinement of the Nd₂Fe₁₄B grains and so for the high coercivity. This mechanism can be incorporated into existing manufacturing processes and can prove to be applicable to novel fabrication routes for Nd-Fe-B magnets, such as additive manufacturing.     

Photocatalytic activity of a new composite material of Fe (III) oxide nanoparticles wrapped by a matrix of polymeric carbon nitride and amorphous carbon

Polymeric carbon nitride was synthesized from urea and doped with Cu and Fe to act as co-catalysts. The material doped with Fe was a new composite material composed of Fe(III) oxides (acting as a co-catalyst) wrapped by the polymer layers and amorphous carbon. Furthermore, the copper doped material was described in a previous report. The photocatalytic degradation of the azo dye direct blue 1 (DB) was studied using as photocatalysts: pure carbon nitride (CN), carbon nitride doped with Cu (CN-Cu) and carbon nitride doped with Fe (CN-Fe). The catalysts were characterized by Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), by X-ray photoelectron spectroscopy (XPS) and Brunauer–Emmett–Teller method (BET), etc. The adsorption phenomenon was studied using the Langmuir and Freundlich models. For the kinetic study, a solution of 500 mg L^?1 of DB1 was treated with each catalyst, visible light and H₂O₂. The dye concentration was measured by spectrophotometry at the wavelength of 565 nm, and the removal of the total organic content (TOC) was quantified. BET analysis yielded surface areas of 60.029, 20.116 and 70.662 m²g^?1 for CN, CN-Cu and CN-Fe, respectively. The kinetics of degradation were pseudo-first order, whose constants were 0.093, 0.039 and 0.110 min^?1 for CN, CN-Cu and CN-Fe, respectively. The total organic carbon (TOC) removal reached the highest value of 14.46% with CN-Fe.     

Nanocrystalline Nd–Fe–B Anisotropic Magnets by Flash Spark Plasma Sintering

Flash spark plasma sintering (flash SPS) is an attractive method to obtain Nd–Fe–B magnets with anisotropic magnetic properties when starting from melt-spun powders. Compared to the benchmark processing route via hot pressing with subsequent die upsetting, flash SPS promises electroplasticity as an additional deformation mechanism and reduced tool wear, while maximizing magnetic properties by tailoring the microstructure—fully dense and high texture. A detailed parameter study is conducted to understand the influence of Flash SPS parameters on the densification and magnetic properties of commercial MQU-F powder. It is revealed that the presintering conditions and preheating temperature before applying the power pulse play a major role for tailoring grain size and texture in the case of hot deformation via Flash SPS. Detailed microstructure and magnetic domain evaluation disclose the texture enhancement with increasing flash SPS temperature at the expense of coercivity. The best compromise between remanence and coercivity (1.37 T and 1195 kA m⁻¹, respectively) is achieved through a combination of presintering at 500 °C for 120 s and preheating temperature of 600 °C, resulting in a magnet with energy product (BH)_max of 350 kJm⁻³. These findings show the potential of flash SPS to obtain fully dense anisotropic nanocrystalline magnets with high magnetic performance.     

Proteomic profile of differentially expressed plasma proteins from dystrophic mice and following suberoylanilide hydroxamic acid treatment

Purpose: Histone Deacetylase Inhibitors (DI) ameliorates dystrophic muscle regeneration restoring muscular strength in the mdx mouse model of Duchenne muscular dystrophy (DMD). The further development of these compounds as drugs for DMD treatment is currently hampered by the lack of knowledge about DIs effect in large dystrophic animal models and that of suitable biomarkers to monitor their efficacy. Experimental design: In this study we applied proteomic analysis to identify differentially expressed proteins present in plasma samples from mdx mice treated with the Suberoylanilide hydroxamic acid (SAHA) and relative normal controls (WT). Results: Several differentially expressed proteins were identified between untreated wild type and mdx mice. Among these, fibrinogen, epidermal growth factor 2 receptor, major urinary protein and glutathione peroxidase 3 (GPX3) were constitutively up‐regulated in mdx, while complement C3, complement C6, gelsolin, leukaemia inhibitory factor receptor (LIFr), and alpha 2 macroglobulin were down‐regulated compared to WT mice. SAHA determined the normalization of LIFr and GPX3 protein level while apoliprotein E was de novo up‐regulated in comparison to vehicle‐treated mdx mice. Conclusions and clinical relevance: Collectively, these data unravel potential serological disease biomarkers of mdx that could be useful to monitor muscular dystrophy response to DI treatment.     

Predictors of Resilience in Maltreated and Nonmaltreated Latino Children.

To date, few studies have sought to investigate the effects of child maltreatment and processes influencing maladaptation and resilience in Latino children. In the current investigation, multiple aspects of functioning, personal resources, and relationship features were examined in school-age maltreated and nonmaltreated Latino children. Maltreated Latino children were found to have fewer areas of resilient functioning. Ego-resiliency and ego-control, as personal resources, and the ability to form a positive relationship with an adult figure outside of the immediate family predicted resilience. However, certain aspects of interpersonal functioning were differentially related to resilience for maltreated and nonmaltreated Latino children. These findings have implications for understanding how resilience can be promoted in maltreated and nonmaltreated Latino children. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A VLSI recurrent network of integrate-and-fire neurons connected by plastic synapses with long-term memory.

Electronic neuromorphic devices with on-chip, on-line learning should be able to modify quickly the synaptic couplings to acquire information about new patterns to be stored (synaptic plasticity) and, at the same time, preserve this information on very long time scales (synaptic stability). Here, we illustrate the electronic implementation of a simple solution to this stability-plasticity problem, recently proposed and studied in various contexts. It is based on the observation that reducing the analog depth of the synapses to the extreme (bistable synapses) does not necessarily disrupt the performance of the device as an associative memory, provided that 1) the number of neurons is large enough; 2) the transitions between stable synaptic states are stochastic; and 3) learning is slow. The drastic reduction of the analog depth of the synaptic variable also makes this solution appealing from the point of view of electronic implementation and offers a simple methodological alternative to the technological solution based on floating gates. We describe the full custom analog very large-scale integration (VLSI) realization of a small network of integrate-and-fire neurons connected by bistable deterministic plastic synapses which can implement the idea of stochastic learning. In the absence of stimuli, the memory is preserved indefinitely. During the stimulation the synapse undergoes quick temporary changes through the activities of the pre- and postsynaptic neurons; those changes stochastically result in a long-term modification of the synaptic efficacy. The intentionally disordered pattern of connectivity allows the system to generate a randomness suited to drive the stochastic selection mechanism. We check by a suitable stimulation protocol that the stochastic synaptic plasticity produces the expected pattern of potentiation and depression in the electronic network.     

Synthesis and characterization of Cu-doped polymeric carbon nitride

Polymeric carbon nitride doped with copper through a solid-state reaction was characterized by several techniques, among them are UV-visible spectroscopy, infrared spectroscopy, X-ray photoelectron spectroscopy, etc. The material is a semiconductor with a wide band gap of 2.74 eV. Sites of both Cu(I) and Cu(II) were detected, apparently only coordinated by the polymer. The material comprises crumpled nanosheets, and is substantially an amorphous layered material with a prevalent 2D structure with low inter-planar interactions, as shown by X-ray diffractometry and TeraHertz spectroscopy. Photo-oxidation of benzyl alcohol was used to probe the active sites of the material, comparing them with the non-doped material. The higher activity and selectivity toward salicylic alcohol of the non-doped material can be due to both a more localized electron transfer and a longer lifetime of the hole–electron pair. Cu-CN favored the oxidation of hydroxymethyl group. Therefore, the presence of copper can favor different reaction pathways with respect to the non-doped material.     

Comparing the impact of bentonite addition for both must clarification and wine fining on the chemical profile of wine from Chambave Muscat grapes

The impact of bentonite fining is generally studied on final wines, and few studies have evaluated it throughout the winemaking process. This work studied the fate of proteins and terpenols, the main targets of bentonite addition, during the processing of Chambave Muscat aromatic grapes. The experimental trials were performed in two vintages (2006 and 2007) and included the following processes: bentonite addition to must only (100 g hL^?1 in both vintages), fining of wine only (100 g hL^?1 in both vintages), double bentonite treatment on must and wine (200 and 150 g hL^?1 in 2006 and in 2007, respectively) and no treatment (control). The results demonstrated that the treatment allowing the best removal of protein was the addition of bentonite to must only. Moreover, a lower removal of free terpenols was observed in samples from double treatment compared with wines fined with bentonite only after alcoholic fermentation.