Mobilization of adsorbed copper and lead from naturally aged soil by bacterial extracellular polymers

Sorption of pollutants is a dominant phase transfer process affecting the fate and transport of metals through the subsurface. The movement of contaminants is retarded by sorption to the stationary subsurface porous media and can seriously hinder remediation efforts. Research has shown that the binding of adsorbed metals becomes more pronounced the longer the contaminant is in the subsurface and the release rates of aged metal contaminants have not received the research attention given to freshly added metals in laboratory studies. Metal release rates are also influenced by the presence of dissolved ligands that compete with mineral soil surfaces by providing binding sites. Dissolved organic matter such as bacterial extracellular polymers are common in natural soil solutions and the metal binding properties of bacterial polymers are well established. Therefore, binding of metals to dissolved biopolymers may result in mobilization of an adsorbed metal. This is important for cases where the metals are assumed to be relatively immobile such as in the case of land applied biosolids. In addition, naturally occurring adherent bacteria commonly produce extracellular polymers and thus may modify the bioavailability of meal contaminants at the point of their attachment. In this study samples from three sites, one a land applied sludge test site, were used to investigate the ability of bacterial extracellular polymers to release metals from soils with long-term exposures. The presence of ?200mg/L bacterial extracellular polymer was found to increase the short-term (less than 350h) release of Cu and Pb by a factor of 2-4-fold.     

Impact of dissolved organic matter on colloid transport in the vadose zone: deterministic approximation of transport deposition coefficients from polymeric coating characteristics

Although numerous studies have been conducted to discern colloid transport and stability processes, the mechanistic understanding of how dissolved organic matter (DOM) affects colloid fate in unsaturated soils (i.e., the vadose zone) remains unclear. This study aims to bridge the gap between the physicochemical responses of colloid complexes and porous media interfaces to solution chemistry, and the effect these changes have on colloid transport and fate. Measurements of adsorbed layer thickness, density, and charge of DOM-colloid complexes and transport experiments with tandem internal process visualization were conducted for key constituents of DOM, humic (HA) and fulvic acids (FA), at acidic, neutral and basic pH and two CaCl₂ concentrations. Polymeric characteristics reveal that, of the two tested DOM constituents, only HA electrosterically stabilizes colloids. This stabilization is highly dependent on solution pH which controls DOM polymer adsorption affinity, and on the presence of Ca⁺² which promotes charge neutralization and inter-particle bridging. Transport experiments indicate that HA improved colloid transport significantly, while FA only marginally affected transport despite having a large effect on particle charge. A transport model with deposition and pore-exclusion parameters fit experimental breakthrough curves well. Trends in deposition coefficients are correlated to the changes in colloid surface potential for bare colloids, but must include adsorbed layer thickness and density for sterically stabilized colloids. Additionally, internal process observations with bright field microscopy reveal that, under optimal conditions for retention, experiments with FA or no DOM promoted colloid retention at solid-water interfaces, while experiments with HA enhanced colloid retention at air-water interfaces, presumably due to partitioning of HA at the air-water interface and/or increased hydrophobic characteristics of HA-colloid complexes.     

2010-2011年中国钨工业报告发布

2010-2011年中国钨工业报告发布,在报告中描述了这两年钨市场的前景。在2010年,中国占世界钨矿储量的65%,约占世界钨产量的85%。2010年后中国的钨储量仅有190万吨,按目前的消耗量只能用20多年。为促进合理开发与利用,1991年中国将钨归类为保护资源。从那时起,实施限制勘探与出口政策。     

螺旋齿轮与正齿轮的表面致密化

过去几十年,用于汽车的粉末冶金零件不断增长,对零件性能的要求也越来越高.汽车用的变速器齿轮的形状复杂,按照齿轮质量要求(DIN,ISO,AGMA等)几何精度很高,按齿面与齿根的耐久性要求力学性能也很高.对于制造复杂形状零件,粉末冶金法对控制成本很有效.通过增加对齿的选择性致密化,在增加很少费用下就能满足精度与力学性能要求.由压制、烧结、碾压致密化及最后热处理组成的工艺路线,可评估用粉末冶金制造的变速器齿轮的可行性.在研究中所用的螺旋齿轮与正齿轮,对致密化及所得到的齿轮的质量与齿根疲劳都进行了试验.     

粉末冶金结构零件材料的泊松比

研究了粉末冶金机械零件使用的烧结材料的杨氏模量、切变模量及泊松比与孔隙度的关系.制备了三种钢粉,在不同条件下进行了压制、烧结与热处理.孔隙度对杨氏模量、切变模量及泊松比的影响最大.特别是泊松比还受孔隙形状的影响,而孔隙形状随粉末类型、烧结温度与烧结气氛及热处理条件而变化.对于大部分实际应用的粉末组成来说,烧结气氛对经烧结和热处理后材料的泊松比影响不大.对于部分预合金化粉末(Fe4%Ni1.5%Cu0.5%Mo)+0.8%石墨,只有在孔隙度低于20%时,烧结温度对泊松比与孔隙度的关系才有影响.在这种情况下.提出了烧结与热处理试样泊松比与孔隙度关系的较简单近似方程:在烧结温度1 423K下,v=0.300-0.266P+0.579P2;在烧结温度1 523K下,v=0.304-0.264P+0.548P2.     

制造高密度零件的一种新工艺

介绍一种制造零件的粉末冶金新工艺,制造的零件性能可能相当于或好于球墨铸铁,密度可达7.55g/cm3。这一工艺正处于初期研发阶段,它实质上是一种首创性技术,在很大程度上既不是依靠高压力压制,也不是利用高温烧结。这一工艺有可能用于经济地生产大型零件,因为所需生坯密度低于6.8g/cm3,典型工艺温度为1175℃。本文将详细介绍当前对该工艺与技术依据的了解。     

Non-steroidal aromatase inhibitors based on a biphenyl scaffold: synthesis, in vitro SAR, and molecular modelling

The synthesis and in vitro biological evaluation (JEG-3 cells) of a series of novel and potent aromatase inhibitors, prepared by microwave-enhanced Suzuki cross-coupling methodology, are reported. These compounds possess a biphenyl template incorporated with the haem-ligating triazolylmethyl moiety, either on its own or in combination with other substituent(s) at various positions on the phenyl rings. The most potent aromatase inhibitor reported herein has an IC(50) value of 0.12 nM, although seven of its congeners are also highly potent (IC(50)相似文献   

Identification of cattle, llama and horse meat by near infrared reflectance or transflectance spectroscopy

Visible and near infrared reflectance spectroscopy (VIS-NIRS) was used to discriminate meat and meat juices from three livestock species. In a first trial, samples of Longissimus lumborum muscle, corresponding to beef (31) llamas (21) and horses (27), were homogenised and their spectra collected in reflectance (NIRSystems 6500 scanning monochromator, in the range of 400-2500 nm). In the second trial, samples of meat juice (same muscle) from the same species (20 beef, 19 llama and 19 horse) were scanned in folded transmission (transflectance). Discriminating models (PLS regression) were developed against “dummy” variables, testing different mathematical treatments of the spectra. Best models indentified the species of almost all samples by their meat (reflectance) or meat juice (transflectance) spectra. A few (three of beef and one of llama, for meat samples; one of beef and one of horse, for juice samples) were classified as uncertain. It is concluded that NIRS is an effective tool to recognise meat and meat juice from beef, llama and horses.     

Growth, yield and seed composition of native Australian legumes with potential as grain crops

BACKGROUND: Many Australian native legumes grow in arid and nutrient‐poor environments. Yet few Australian herbaceous legumes have been investigated for domestication potential. This study compared growth and reproductive traits, grain yield and seed composition of 17 native Australian legumes with three commercial grain legumes. RESULTS: Seed yields of seven native legumes were > 40% of Cicer arietnum, with highest seed yields and harvest indices in Glycine sp. (14.4 g per plant, 0.54 g g^?1) and Lotus cruentus (10.2 g per plant, 0.65 g g^?1). Five native species flowered earlier than field pea (Pisum sativa) (109 days), though many were slower to flower and set seed. Largest seeds were found in Glycine canescens (17 mg), with seed of other native species 14 times smaller than commercial cultivars. Seed composition of many native legumes was similar to commercial cultivars (200–330 g protein kg^?1 dry weight (DW), 130–430 g dietary fibre kg^?1 DW). Two Cullen species had high fat content (>110 g kg^?1 DW) and Trigonella sauvissima had the highest crude protein content (370 g kg^?1 DW). CONCLUSION: The seed composition and reproductive traits of some wild native Australian legumes suggest they could offer potential as grain crops for soils and environments where the current grain legumes are uneconomic. Further evaluation of genetic diversity, especially for seed size, overall productivity, and reproductive development is needed. Copyright © 2011 Society of Chemical Industry     

2007年我国铁粉、铜粉生产状况分析

本文对近几年铁粉、铜粉行业的生产现状进行了统计,并介绍了该行业的发展状况.针对产品品种结构、质量状况和存在问题进行了分析,为今后行业发展提出了建议.