New local binary pattern approaches based on color channels in texture classification

Multimedia Tools and Applications - In this paper, four novel, simple and robust approaches, which are left to right local binary patterns (LBPLL2R), top to down local binary patterns (LBPT2D),...     

Extraction and reliable determination of acrylamide from thermally processed foods using ionic liquid-based ultrasound-assisted selective microextraction combined with spectrophotometry

Acrylamide (AAm) is a carcinogenic chemical that can form in thermally processed foods by the Maillard reaction of glucose with asparagine. AAm can easily be formed especially in frequently consumed chips and cereal-based foods depending on processing conditions. Considering these properties of AAm, a new, simple and green method is proposed for the extraction of AAm from thermally processed food samples. In this study, an ionic liquid (1-butyl-3-methylimidazolium tetrafluoroborate, [Bmim][BF₄]) as extractant was used in the presence of a cationic phenazine group dye, 3,7-diamino-5-phenylphenazinium chloride (PSH⁺, phenosafranine) at pH 7.5 for the extraction of AAm as an ion-pair complex from selected samples. Under optimum conditions, the analytical features obtained for the proposed method were as follows; linear working range, the limits of detection (LOD, 3S_b/m) and quantification (LOQ, 10S_b/m), preconcentration factor, sensitivity enhancement factor, sample volume and recovery% were 2.2–350 µg kg^?1, 0.7 µg kg^?1, 2.3 µg kg^?1, 120, 95, 60 mL and 94.1–102.7%, respectively. The validity of the method was tested by analysis of two certified reference materials (CRMs) and intra-day and inter-day precision studies. Finally, the method was successfully applied to the determination of AAm levels in thermally processed foods using the standard addition method.     

Novel ZA27/B4C/Graphite Hybrid Nanocomposite-Bearing Materials with Enhanced Wear and Corrosion Resistance

Metallurgical and Materials Transactions A - In this study, nanosized B4C and graphite-reinforced ZA27 matrix hybrid nanocomposites were produced with mechanical milling followed by hot pressing....     

Production of high strength concrete by use of industrial by-products

Blast furnace slag aggregates (BFSA) were used to produce high-strength concretes (HSC). These concretes were made with total cementitious material content of 460–610 kg/m³. Different water/cement ratios (0.30, 0.35, 0.40, 0.45 and 0.50) were used to carry out 7- and 28-day compressive strength and other properties. Silica fume and a superplasticizer were used to improve BFSA concretes. Slump was kept constant throughout this study. Ten percent silica fume was added as a replacement for ordinary portland cement (OPC) in order to obtain HSC. The silica fume was used as highly effective micro-filler and pozzolanic admixture. Superplasticizer at dosages of 2%, 1.5%, 1%, 0.5% and 0% by OPC weight for 0.30, 0.35, 0.40, 0.45 and 0.50 w/c ratios, respectively, were adopted. Results showed that compressive strength of BFSA concretes were approximately 60–80% higher than traditional (control) concretes for different w/c ratios. These concretes also had low absorption and high splitting tensile strength values. It is concluded that BFSA, in combination with other supplementary cementitious materials, can be utilized in making high strength concretes.     

The fabrication of exfoliated graphite sheet-based air cathodes and gel electrolyte for metal-air batteries

In this paper, we demonstrate that activated carbon (AC) and manganese dioxide (MnO₂) coated exfoliated graphite sheets are a promising cathode for metal-air batteries. A simple and effective method is developed to exfoliate the graphite sheets and to load a catalyst onto their surfaces. Several low-cost, environmentally friendly air cathodes are fabricated, and their performances are tested by constructing Al-air b`atteries whose electrolyte 6 M NaOH, including ZnO inhibitor, is gelled by adding a cost-effective water retainer. The experimental results show that this new Al-air battery has a good discharge performance. In particular one of the new cathodes containing 50 wt% AC and 50 wt% MnO₂ produces a capacity of 311 mAh/g at a constant current discharge of 1.56 mA. Finally, future research directions are discussed for the further usage of the fabricated cathodes.     

Failure Analysis of Two-Dimensional Carbon-Epoxy Composite Plate Pinned Joint

The aim of this study is to investigate failure strength and failure mode of a mechanically fastened carbon-epoxy composite plate of arbitrary orientation. The failure load and the failure mode are analyzed numerically and experimentally. The numerical method includes two steps. First, the stress distribution in the plate is calculated by the use of finite-element method. Second, the failure load and the failure mode are predicted by means of Tsai-Hill and fiber tensile-compressive failure criteria. A computer program was developed which can be used to calculate the failure load, the failure mode, and the propagation of failure. The distance-to-diameter, E/D , and width-to-diameter, W/D , ratios in the plate are changed from 1 to 5 and 2 to 5, respectively. It is found that full bearing strength is developed when E/D and W/D ratios are equal to or greater than 4.     

Properties of pumice aggregate concretes at elevated temperatures and comparison with ANN models

The mechanical properties and thermal conductivity of concretes including pumice aggregate (PA) exposed to elevated temperature were analyzed by thermal conductivity, compressive strength, flexure strength, dynamic elasticity modulus (DEM) and dry unit weight tests. PA concrete specimens were cast by replacing a varying part of the normal aggregate (0–2 mm) with the PA. All concrete samples were prepared and cured at 23 ± 10C lime saturated water for 28 days. Compressive strength of concretes including PA decreased that reductions were 14, 19, 25 and 34% for 25, 50, 75 and 100% PA, respectively. The maximum thermal conductivity of 1.9382 W/mK was observed with the control samples containing normal aggregate. The tests were carried out by subjecting the samples to a temperature of 0, 100, 200, 300, 400 500, 600 and 700 °C for 3 h, then cooling by air cooling or in water method. The results indicated that all concretes exposed to a temperature of 500 and 700 °C occurred a significant decrease in thermal conductivity, compressive strength, flexure strength and DEM. An artificial neural network (ANN) approach was used to model the thermal and mechanical properties of PA concretes. The predicted values of the ANN were in accordance with the experimental data. The results indicate that the model can predict the concrete properties after elevated temperatures with adequate accuracy. Copyright © 2016 John Wiley & Sons, Ltd.