Computational and experimental study of dental resin composites with high filler content

Journal of Materials Science - Nanocomposites have been used in various industries due to their excellent properties. For some of them, high filler content (over 50 wt%) is beneficial to improving...     

Gelling behavior of MgAl2O4 slurries with a common dispersant

MgAl₂O₄ transparent ceramics were shaped by a commonly used polyacrylic acid (PAA), which acted as both dispersant and gelling agent. The spinel slurries were prepared by ball-milling MgAl₂O₄ powder, PAA, and water in an attrition mill. The gelling of slurries happened at room temperature in air atmosphere without any other organic additive. The gelling mechanism was the formation of chelates between Mg²⁺ and carboxyl groups (-COO⁻) of PAA. The frequency-based testing method was applied to investigate the gelling process of the as-prepared slurry. In addition, a novel in situ characterization method based on a modified indentation testing was invented to better understand the strengthening of the wet green body with time and to guide when demolding could be carried out. After sintering, transparent MgAl₂O₄ ceramics with high in-line transmittance were resulted.     

Memory-based dynamic event-triggered control for networked interval type-2 fuzzy systems subject to DoS attacks

In this article, the memory-based dynamic event-triggered controller design issue is investigated for networked interval type-2 (IT2) fuzzy systems under non-periodic denial-of-service (DoS) attacks. For saving limited network bandwidth, a novel memory-based dynamic event-triggered mechanism (DETM) is proposed to schedule data communication. Unlike existing event-triggered generators, the developed memory-based DETM can utilize a series of newly released signals and further save network resources by introducing interval dynamic variables. Moreover, to improve design flexibility, an IT2 fuzzy controller with freely selectable fuzzy rule number and premise membership functions (MFs) is synthesized. Then, a new switched time-delay system with imperfectly matched MFs is established under the consideration of memory-based DETM and DoS attacks simultaneously. Besides, based on the property of MFs, the boundary information of membership grades and slack matrices are introduced in the stability analysis. Furthermore, by using a piecewise Lyapunov–Krasovskii method, membership-functions-dependent criteria are deduced to ensure the asymptotic stability of built fuzzy switched systems. Finally, the effectiveness of proposed control strategies is demonstrated by simulation examples.     

一种最小变形度全景视频映射方法

全景视频需要经过采样映射转换成平面矩形视频,以便后续的压缩编码.针对现有映射方法存在的内容变形和采样不均匀问题,提出一种最小变形度映射方法(Minimum Deformation Projection,MDP).首先提出新的变形度计算公式求得最优解,其次结合像素排列为矩形的要求和人工边界等因素对最优解做近似,最后得到了最优的多边形映射形状和像素排列方案.实验数据表明,MDP的采样密度更均匀,结合使用x265,相对于ERP可以获得约14.47％的增益,优于其他映射方法.     

The Versatile Manipulations of Self-Assembled Proteins in Vaccine Design

Protein assemblies provide unique structural features which make them useful as carrier molecules in biomedical and chemical science. Protein assemblies can accommodate a variety of organic, inorganic and biological molecules such as small proteins and peptides and have been used in development of subunit vaccines via display parts of viral pathogens or antigens. Such subunit vaccines are much safer than traditional vaccines based on inactivated pathogens which are more likely to produce side-effects. Therefore, to tackle a pandemic and rapidly produce safer and more effective subunit vaccines based on protein assemblies, it is necessary to understand the basic structural features which drive protein self-assembly and functionalization of portions of pathogens. This review highlights recent developments and future perspectives in production of non-viral protein assemblies with essential structural features of subunit vaccines.     

Preparation of transparent BaSO4 nanodispersions by high-gravity reactive precipitation combined with surface modification for transparent X-ray shielding nanocomposite films

BaSO₄ nanoparticles as important functional materials have attracted considerable research interests, due to their X-rays barrier and absorption properties. However, most of BaSO₄ nanoparticles prepared by traditional technology are nanopowders with broad size distribution and poor dispersibility, which may greatly limit their applications. To the best of our knowledge, the synthesis of transparent BaSO₄ nanodispersions was rarely reported. Here, we firstly present a novel and efficient method to prepare transparent and stable BaSO₄ nanodispersions with a relatively small particle size around 10 to 17 nm using a precipitation method in a rotating packed bed (RPB), followed by a modification treatment using stearic acid. Compared with the BaSO₄ prepared in a traditional stirred tank, the product prepared using an RPB has much smaller particle size and narrower size distribution. More importantly, by using RPB, the reaction time can be significantly decreased from 20 min to 18 s. Furthermore, the transparent BaSO₄-polyvinyl butyral nanocomposite films with good X-ray shielding performance can be easily fabricated. We believe that the stable BaSO₄ nanodispersions may have a wide range of applications for transparent composite materials and coatings with X-ray shielding performance for future research.     

我国中空吹塑行业发展现状及“十四五”期间重点产品、工艺和设备发展方向

从原料、中空成型机和吹塑工艺等方面介绍了我国中空吹塑行业发展现状，并对电子化学品专用超洁净桶、高压储氢四型瓶、全电动中空成型机、微发泡中空成型技术和挤吹聚对苯二甲酸乙二醇酯（PET）容器等在“十四五”期间的重点产品、工艺和设备发展方向进行了展望。     

我国MTBE的生产使用现状及趋势分析

对我国MTBE的生产工艺及下游产品进行了详细的分析,重点分析了影响MTBE产品生产使用的各方面因素,从能源方针、车用燃料政策及环保要求等角度对我国MTBE产品的未来发展趋势进行了预测分析。结果显示,2020年以后我国汽油调和用MTBE的生产使用量将逐步降低,但此过程可能会较为平缓。     

短寿命核素气溶胶监测相关问题探讨

目前的放射性气溶胶连续监测仪或连续空气监测仪,都是针对长寿命的α放射性核素(如U,Pu)或β放射性核素(如¹³⁷Cs,⁹⁰Sr),因而在采样测量过程中都不考虑被监测核素的衰变修正。但是,包括核电站在内的具有反应堆运行的核设施,对某些短寿命放射性核素(如⁸⁸Rb,¹³⁸Cs 以及¹⁸F等)的气溶胶监测也是重要的。本文针对短寿命核素气溶胶监测中的有关问题进行讨论,提出了相关的可供监测仪器报告监测结果的实际可行的数据处理方法。     

SnSe+Ag_2Se composite engineering with ball milling for enhanced thermoelectric performance

Earth-abundant IV-VI semiconductor SnSe is regarded as a promising thermoelectric material due to its intrinsic low thermal conductivity. In this report, the highly textured SnSe/Ag2 Se composites were first designed by solid solution method followed by spark plasma sintering(SPS) and their thermoelectric properties in two directions were investigated, and then, the performance of composites was further optimized with an additional ball milling. The coexistence of SnSe and Ag2 Se phases is clearly confirmed by energy-dispersive X-ray spectroscopy(EDX) in transmission electron microscopy(TEM). After ball milling, the size of SnSe grains as well as the incorporated Ag2 Se particles reduces effectively, which synergistically optimizes the electrical and thermal transport properties at high temperature range. As a result, a maximum ZT of ～0.74 at 773 K for SnSe+1.0%Ag_2 Se in the direction vertical to the pressing direction is achieved. Composite engineering with additional ball milling is thus proved to be an efficient way to improve the thermoelectric properties of SnSe, and this strategy could be applicable to other thermoelectric systems.