Mast Cell Chymase and Kidney Disease

A sizable part (~2%) of the human genome encodes for proteases. They are involved in many physiological processes, such as development, reproduction and inflammation, but also play a role in pathology. Mast cells (MC) contain a variety of MC specific proteases, the expression of which may differ between various MC subtypes. Amongst these proteases, chymase represents up to 25% of the total proteins in the MC and is released from cytoplasmic granules upon activation. Once secreted, it cleaves the targets in the local tissue environment, but may also act in lymph nodes infiltrated by MC, or systemically, when reaching the circulation during an inflammatory response. MC have been recognized as important components in the development of kidney disease. Based on this observation, MC chymase has gained interest following the discovery that it contributes to the angiotensin-converting enzyme’s independent generation of angiotensin II, an important inflammatory mediator in the development of kidney disease. Hence, progress regarding its role has been made based on studies using inhibitors but also on mice deficient in MC protease 4 (mMCP-4), the functional murine counterpart of human chymase. In this review, we discuss the role and actions of chymase in kidney disease. While initially believed to contribute to pathogenesis, the accumulated data favor a more subtle view, indicating that chymase may also have beneficial actions.     

Modelling and controller design of an isolated diesel enginepermanent magnet synchronous generator

A method to analyze the steady-state performance of a stand-alone permanent magnet synchronous generator driven by a diesel engine is presented. The proposed method is based on equivalent d-q circuits and the phasor diagram of such a generator under steady-state conditions. A fixed capacitor-thyristor controlled reactor scheme is used to regulate the generator terminal voltage by controlling the thyristor ignition angle. Furthermore the overall system dynamics are modelled in terms of state variables and control inputs. Based on a reduced order linearized model, digital optimal state and output feedback controllers are designed by minimising a quadratic performance index using the dynamic programming technique. The objective of the controller is to maintain the load voltage and frequency constant under varying load conditions. The controller's effectiveness is assessed by examining the closed-loop system response to sudden load changes     

An Eco-Friendly Approach to the Control of Pathogenic Microbes and Anopheles stephensi Malarial Vector Using Magnesium Oxide Nanoparticles (Mg-NPs) Fabricated by Penicillium chrysogenum

The discovery of eco-friendly, rapid, and cost-effective compounds to control diseases caused by microbes and insects are the main challenges. Herein, the magnesium oxide nanoparticles (MgO-NPs) are successfully fabricated by harnessing the metabolites secreted by Penicillium chrysogenum. The fabricated MgO-NPs were characterized using UV-Vis, XRD, TEM, DLS, EDX, FT-IR, and XPS analyses. Data showed the successful formation of crystallographic, spherical, well-dispersed MgO-NPs with sizes of 7–40 nm at a maximum wavelength of 250 nm. The EDX analysis confirms the presence of Mg and O ions as the main components with weight percentages of 13.62% and 7.76%, respectively. The activity of MgO-NPs as an antimicrobial agent was investigated against pathogens Staphylococcus aureus, Bacillus subtilis, Pseudomonas aeruginosa, Escherichia coli, and Candida albicans, and exhibited zone of inhibitions of 12.0 ± 0.0, 12.7 ± 0.9, 23.3 ± 0.8, 17.7 ± 1.6, and 14.7 ± 0.6 mm respectively, at 200 µg mL⁻¹. The activity is decreased by decreasing the MgO-NPs concentration. The biogenic MgO-NPs exhibit high efficacy against different larvae instar and pupa of Anopheles stephensi, with LC50 values of 12.5–15.5 ppm for I–IV larvae instar and 16.5 ppm for the pupa. Additionally, 5 mg/cm² of MgO-NPs showed the highest protection percentages against adults of Anopheles stephensi, with values of 100% for 150 min and 67.6% ± 1.4% for 210 min.     

Synthesis and Thermal Treatment of Pd-Cr@Carbon for Efficient Oxygen Reduction Reaction in Proton-Exchange Membrane Fuel Cells

A nanostructured Pd-Cr catalyst was deposited on a supported carbon surface using the modified borohydride reduction method for the oxygen reduction reaction (ORR) to be utilized as an efficient catalyst in the proton-exchange membrane fuel cell. The crystal structure and feature nanostructure of the Pd-Cr@carbon were established through the use of X-ray powder diffraction (XRD) and transmission electron microscopy (TEM). Meanwhile, its catalytic activity was studied using the cyclic voltammetry and electrochemical polarization techniques. Based on the XRD analysis, it was observed that the Pd phase with the fcc crystal structure was dominant, while the Pd-Cr phase with tetragonal crystal structure was detected only for the as-prepared sample and samples calcined at 573 K. The estimated average crystallite size of the Pd phase increased from 9.66 to 37.54 nm as the calcination temperature increased to 973 K, and the calcination time had a slight effect on the crystallite size. On the other side, the average crystallite size for the formed Pd-Cr phase slightly increased from 43.74 nm for the as-prepared sample to 44.90 nm for the sample calcined at 573 K for 3 h. The TEM examination revealed the uniform distribution of the Pd and Pd-Cr nanoparticles upon the carbon surface. The calcination temperature and time played an important role in controlling the structural and morphology parameters of Pd-Cr@carbon. The adsorption/desorption potentials were found to be dependent on the calcination temperature and time and hence the particle and crystallite sizes. The optimum ORR activity and chemical stability were observed for samples calcined at 773 K for 3 h.

     

Speech enhancement with an adaptive Wiener filter

This paper proposes an adaptive Wiener filtering method for speech enhancement. This method depends on the adaptation of the filter transfer function from sample to sample based on the speech signal statistics; the local mean and the local variance. It is implemented in the time domain rather than in the frequency domain to accommodate for the time-varying nature of the speech signals. The proposed method is compared to the traditional frequency-domain Wiener filtering, spectral subtraction and wavelet denoising methods using different speech quality metrics. The simulation results reveal the superiority of the proposed Wiener filtering method in the case of Additive White Gaussian Noise (AWGN) as well as colored noise.     

Hyperbranched Polymers Containing Cyclopentadienyliron Complexes

A number of hyperbranched polymers containing cyclopentadienyliron moieties were prepared using the A₂+B₃ method. The A₂ compounds used were common diols, dithiols or dichloroarenecomplexes. B₃ compounds included either prepared star-shaped molecules or a purchased triol. The effect of the reaction conditions on the properties of the products was probed. Analysis of the prepared polymers was conducted using ¹H and ¹³C NMR, viscometry, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Viscometry values were generally found to be low, in the range of 0.175–0.300 dl/g. TGA showed losses starting at approximately 230°C and ending at 280°C, corresponding to the decomposition of the cyclopentadienyliron moiety. Degradation of the polyether backbone was found to occur starting at 390–567°C. Glass transition temperatures were found to be between 60 and 134°C, whereas melting temperatures ranged from 155 to 190°C.     

Synthesis and Polymerization of Cationic bis(cyclopentadienyliron)arene Complexes Containing Arylazo Dyes

The synthesis of the title complexes was achieved via the reaction of -p-dichlorobenzene- -cyclopentadienyliron cations with 4,4′-bis(4-hydroxyphenyl)valeric acid to produce the diiron complexes which were then reacted with a number of arylazo dyes to give cationic bis(cyclopentadienyliron)arene complexes containing the arylazo dyes. These iron-containing monomers were subsequently polymerized via nucleophilic aromatic substitution using 1,8-octanedithiol, 4,4′-thiobisbenzenethiol, or bisphenol A to produce the desired coloured cationic organoiron polymers. The weight – average molecular weights were estimated to range from 11,800 to 31,600. UV–vis studies conducted in dimethylformamide (DMF) showed that the metallated polymers exhibited of 412–491 nm. Addition of HCl to the polymer solution caused a bathochromic shift into the range of 515–530 nm. Thermogravimetric analysis (TGA) revealed that the iron moieties were cleaved between 205 and 248 °C while the polyether/thioether backbone degraded between 380 and 613 °C. Differential scanning calorimetry (DSC) showed that the polymers exhibited glass transition temperatures (Tg) ranging from 106 to 184°C.This paper is dedicated to Professor Richard J. Puddephatt in recognition of his outstanding contribution to the field of metal-containing polymers.     

Organoiron Polyelectrolytes: Synthesis and Characterization of Cationic Cyclopentadienyliron Complexes of Polyarylether-Imines

The synthesis of an aromatic ether complex of cyclopentadienyliron containing two terminal aldehyde groups was achieved via metal-mediated nucleophilic aromatic substitution reactions. This dialdehyde monomer was subsequently reacted with a variety of aliphatic and aromatic diamines to produce the corresponding soluble cationic organoiron polyether-imines. These cationic organometallic polymers were characterized using IR, ¹H, and ¹³C NMR, viscosity and thermogravimetric analysis. Viscosity measurements showed that these polymers exhibited polyelectrolyte effects in DMSO solutions. Thermogravimetric analysis showed that decoordination of the iron moieties occurred at about 300°C for polymers with aliphatic spacers in their backbones, while the cyclopentadienyliron moieties were cleaved from the polymers with aromatic spacers in their backbones at about 200°C. Photolytic demetallation of the organoiron polymers resulted in the removal of the pendent cyclopentadienyliron moieties and allowed for the isolation of their organic analogs. While the organoiron polymers were soluble in polar organic solvents, the corresponding organic polymers exhibited very limited solubilities or were insoluble. The organic polymers had glass transition temperatures between 101 and 120°C