子集模拟中马尔可夫链蒙特卡洛抽样算法比较

文章着重研究子集模拟中马尔可夫链蒙特卡洛(MCMC)抽样算法的抽样效率与计算精度。首先，阐述可靠度子集模拟的基本原理与中间状态样本生成的各种MCMC抽样算法，在稳态马尔可夫链构造基础上提出延迟拒绝MMH(Modified Metropolis Hasting)算法，通过在MMH算法上增加备选样本的延迟拒绝步提高MMH算法的抽样效率；阐述基于随机游走与基于扩散方程MCMC方法中建议分布的差异，进一步对备选样本接受率为1的preconditioned Crank-Nicolson(pCN)算法和条件抽样(Conditional sampling, CS)算法开展研究，证明两种算法的等价性；推导有效样本量的计算方法，提出采用有效样本量与总样本量的比值定义MCMC方法的抽样效率。通过复杂目标分布的样本生成研究不同MCMC抽样算法建议分布及其参数对备选样本接受率与抽样效率的影响，最后通过计算实例研究子集模拟过程采用不同MCMC抽样算法得到失效概率的相对误差及其变异性，揭示不同MCMC抽样算法对失效概率计算精度的影响。研究表明：不同MCMC抽样算法生成备选样本的接受率及其自相关性受建议分布及其参数影响较大，对于复杂的目标分布，pCN算法和CS算法的抽样效率较高，延迟拒绝MMH算法次之；采用CS算法和延迟拒绝MMH算法进行子集模拟得到的失效概率精度较高且变异性较低；增加子集模拟中间状态样本量可以提高失效概率计算精度并降低其变异性。     

空中分布式作战概念及关键技术分析

空中分布式作战是美军为应对“反介入/区域拒止”挑战提出的重要作战概念，具备分布式、智能化、高动态、大规模等特点，是未来美军空中作战平台在体系支持下作战样式的发展趋势。首先，按照提出时间梳理了美军空中分布式作战概念及典型研究项目，分析了空中分布式作战内涵、特点、工作机理以及发展趋势；然后，结合空中作战平台典型构型，提出了全域作战体系支撑下的空中分布式作战样式设想；最后，设计了空中分布式作战体系技术框架，并讨论了相应的关键技术。     

Spatial–Temporal Fusion Based Path Planning for Source Seeking in Wireless Sensor Network

International Journal of Wireless Information Networks - Source seeking problem has been faced in many fields, especially in search and rescue applications. We proposed a virtual structure-based...     

Stabilization for Schrödinger Equation with Internal Damping and Boundary Disturbance

In this paper, the stabilization for Schrödinger equation subject to internal damping and boundary disturbance at the control end is investigated. Due to its immeasurability, the nonlinear observer system is designed to obtain the state information, and the existence of weak solution and its convergence for the nonlinear observer system are proved. The feedback control is realized by the backstepping transformation. In addition, the adaptive disturbance rejection control is applied to estimate the disturbance. According to the observer and disturbance estimation, the feedback control is finally designed to stabilize the system asymptotically.

     

Direct ink writing of vancomycin-loaded polycaprolactone/ polyethylene oxide/ hydroxyapatite 3D scaffolds

Novel inks were formulated by dissolving polycaprolactone (PCL), a hydrophobic polymer, in organic solvent systems; polyethylene oxide (PEO) was incorporated to extend the range of hydrophilicity of the system. Hydroxyapatite (HAp) with a weight ratio of 55–85% was added to the polymer-based solution to mimic the material composition of natural bone tissue. The direct ink writing (DIW) technique was applied to extrude the formulated inks to fabricate the predesigned tissue scaffold structures; the influence of HAp concentration was investigated. The results indicate that in comparison to other inks containing HAp (55%, 75%, and 85%w/w), the ink containing 65% w/w HAp had faster ink recovery behavior; the fabricated scaffold had a rougher surface as well as better mechanical properties and wettability. It is noted that the 65% w/w HAp concentration is similar to the inorganic composition of natural bone tissue. The elastic modulus values of PCL/PEO/HAp scaffolds were in the range of 4–12 MPa; the values were dependent on the HAp concentration. Furthermore, vancomycin as a model drug was successfully encapsulated in the PCL/PEO/HAp composite scaffold for drug release applications. This paper presents novel drug-loaded PCL/PEO/HAp inks for 3D scaffold fabrication using the DIW printing technique for potential bone scaffold applications.     

Dynamic voltage scaling based energy-minimized partial task offloading in fog networks

Wireless Networks - With the dynamic voltage scaling (DVS) technology, the terminal node (TN) can dynamically adjust its computational speed, thus providing a new way to save energy during task...     

Simultaneous fractionation of multiple classes of polyphenols from honeybush tea using solid-phase extraction

The structural diversity of polyphenols and the inherent limitations of current extraction techniques pose a challenge to extract polyphenols using a simple and green method. Hence, in this study, a method was developed to simultaneously fractionate multiple classes of polyphenols by only varying ethanol-water solutions. Honeybush tea, which is rich in polyphenols, was selected as a model for this study. Solvent extraction followed by solid-phase extraction (SPE) was developed to obtain a polyphenol-rich fraction from six honeybush samples. Based on a gradient elution programme (10%, 30%, 50%, 70% and 90% (v/v) ethanol-water solution) of SPE, the Strata X cartridge showed a better recovery of most targeted polyphenols under 0.9 mL of the drying volume and 1 mL min⁻¹ of the dispensing speed. The elution programme for fractionating most polyphenols was as follows: single elution with 50% ethanol, followed by twice elution with 70% ethanol. The antioxidant capacity was used to analyse the differences among the polyphenol-rich fractions from six honeybush samples. Principal component analysis (PCA) revealed that unfermented C. genistoides (GG) has the greatest antioxidant capacity among the honeybush species studied. Additionally, mangiferin, isomangiferin and vicenin-2 were the main contributors to the antioxidant capacity in six honeybush fractions according to the correlation study.