Factors affecting bulk to total bacteria ratio in drinking water distribution systems

Bacteria in drinking water systems can grow in bulk water and as biofilms attached to pipe walls, both causing regrowth problems in the distribution system. While studies have focused on evaluating the factors influencing the bacteria in bulk water and in biofilms separately, there is a need for understanding biofilm characteristics relative to the bulk water phase. The current study evaluated the effects of chlorine and residence time on the presence of culturable bacteria in biofilms relative to that in bulk water. The results showed that when no chlorine residual was present in the system, the median ratio of bulk to total bacteria was 0.81, indicating that 81% of the bacteria were present in bulk water, whereas only 19% were present in the biofilm. As chlorine concentration increased to 0.2, 0.5, and 0.7 mg/L, the median percentage of bacteria present in bulk water decreased to 37, 28, and 31, respectively. On the other hand, as the residence times increased to 8.2, 12, 24, and 48h, the median percentage of bacteria present in bulk water increased to 7, 37, 58, and 88, respectively, in the presence of a 0.2mg/L chlorine residual. The common notion that biofilms dominate the distribution system is not true under all conditions. These findings suggest that bulk water bacteria may dominate in portions of a distribution system that have a low chlorine residual.     

TECHNICAL AND LOCATIONAL EVOLUTION IN A HETEROGENEOUS INDUSTRY

ABSTRACT This paper uses an evolutionary simulation model of technical and locational adjustment to refine concepts of labor- and output-market segmentation within an industry. The simulation model focuses on differences among establishments arising from different strategic orientations. In particular, there are significant differences in establishments' likelihoods of relocation within a heterogeneous landscape. Empirically testable hypotheses are suggested for subsequent analyses of intraindustry evolution and local impacts.     

Building‐related health symptoms and classroom indoor air quality: a survey of school teachers in New York State

Most previous research on indoor environments and health has studied school children or occupants in non‐school settings. This investigation assessed building‐related health symptoms and classroom characteristics via telephone survey of New York State school teachers. Participants were asked about 14 building‐related symptoms and 23 classroom characteristics potentially related to poor indoor air quality (IAQ). Poisson regression analysis was used to assess the relationship between these symptoms and each classroom characteristic, controlling for potential confounders. About 500 teachers completed the survey. The most frequently reported classroom characteristics included open shelving (70.7%), food eaten in class (65.5%), dust (59.1%), and carpeting (46.9%). The most commonly reported symptoms included sinus problems (16.8%), headache (15.0%), allergies/congestion (14.8%), and throat irritation (14.6%). Experiencing one or more symptoms was associated most strongly with reported dust (relative risk (RR) = 3.67; 95% confidence interval (CI): 2.62–5.13), dust reservoirs (RR = 2.13; 95% CI: 1.72–2.65), paint odors (RR = 1.73; 95% CI: 1.40–2.13), mold (RR = 1.71; 95% CI: 1.39–2.11), and moldy odors (RR = 1.65 95% CI: 1.30–2.10). Stronger associations were found with increasing numbers of reported IAQ‐related classroom characteristics. Similar results were found with having any building‐related allergic/respiratory symptom. This research adds to the body of evidence underscoring the importance to occupant health of school IAQ.     

Lightening grey literature: Making the invisible visible

Technical reports are an important and unique source of engineering information. This has been recognised in the US where federal technical reports are freely available via the Internet. UK reports are hard to identify, locate and obtain. Within the context of new initiatives promoting cross‐sectoral partnership and collaboration, the Research Support Libraries Programme (RSLP) and British Library Co‐operation and Partnership Programme (BLCCP) have funded the MAGiC project. MAGiC aims to provide the UK engineering community with a greater awareness of, and access to, key collections of technical reports by: mapping UK report collections; developing a methodology for prioritising digitisation of reports; providing an entry point to search and browse widely distributed resources; developing a core electronic archive of engineering report literature; evaluating the feasibility of creating a commercial service based on the supply of electronic documents. An exposition of work in progress is given with a projection of how the demonstrator service will operate. A call for help with the project in locating report collections within academia, industry, and government, and contact details, are given.     

The political ontology of collaborative water governance

This article examines the various definitions of, and analytical approaches to, collaborative water governance (CWG). While the concept’s usage has increased over the past decade, there lacks any deep engagement with the concept of the political at the heart of CWG. This article argues that contemporary approaches to CWG risk emptying the concept of its utility and coherence. Correcting this deficiency requires a focus on the social and ideational constructions of water. This will strengthen future collaborative water arrangements and enable deeper appreciation of the ways the political makes and remakes what is possible in water governance.     

Nutrient release from integrated constructed wetlands sediment receiving farmyard run‐off and domestic wastewater

Constructed wetland sediments are frequently contaminated with nitrogen and phosphorus. There is a risk that accumulated pollutants can either be remobilised or reach the groundwater. Five identical mesocosms, which were filled with subsoil collected from full‐scale integrated constructed wetland (the first cell receives the most contaminated influent), were set up to examine nutrient removal within sediment layers. The results indicated that accumulated nutrients leached out into inflow water and that the sediment capacity of nutrient retention decreased as the wetlands aged. Furthermore, the mesocosm planted with Phragmites australis achieved better treatment results compared with the one planted with Agrostis stolonifera. The risk of contamination to groundwater does not exist because none of the treated water reached the bottom outlet during the study period. Both the bentonite (clay) and biogeochemical processes taking place within sediments proved to be efficient in preventing polluted water from infiltrating into lower lying soils.     

Swimming pools as heat sinks for air conditioners: Model design and experimental validation for natural thermal behavior of the pool

Swimming pools as thermal sinks for air conditioners could save approximately 40% on peak cooling power and 30% of overall cooling energy, compared to standard residential air conditioning. Heat dissipation from pools in semi-arid climates with large diurnal temperature shifts is such that pool heating and space cooling may occur concurrently; in which case heat rejected from cooling equipment could directly displace pool heating energy, while also improving space cooling efficiency. The performance of such a system relies on the natural temperature regulation of swimming pools governed by evaporative and convective heat exchange with the air, radiative heat exchange with the sky, and conductive heat exchange with the ground. This paper describes and validates a model that uses meteorological data to accurately predict the hourly temperature of a swimming pool to within 1.1 °C maximum error over the period of observation. A thorough review of literature guided our choice of the most appropriate set of equations to describe the natural mass and energy exchange between a swimming pool and the environment. Monitoring of a pool in Davis, CA, was used to confirm the resulting simulations. Comparison of predicted and observed pool temperature for all hours over a 56 day experimental period shows an R-squared relatedness of 0.967.