Plasma Metabolomics Analysis of Polyvinyl Chloride Workers Identifies Altered Processes and Candidate Biomarkers for Hepatic Hemangiosarcoma and Its Development

Background: High-level occupational vinyl chloride (VC) exposures have been associated with hepatic hemangiosarcoma, which typically develops following a long latency period. Although VC is genotoxic, a more comprehensive mode of action has not been determined and diagnostic biomarkers have not been established. The purpose of this study is to address these knowledge gaps through plasma metabolomics. Methods: Plasma samples from polyvinyl chloride polymerization workers who developed hemangiosarcoma (cases, n = 15) and VC exposure-matched controls (n = 17) underwent metabolomic analysis. Random forest and bioinformatic analyses were performed. Results: Cases and controls had similar demographics and routine liver biochemistries. Mass spectroscopy identified 606 known metabolites. Random forest analysis had an 82% predictive accuracy for group classification. 60 metabolites were significantly increased and 44 were decreased vs. controls. Taurocholate, bradykinin and fibrin degradation product 2 were up-regulated by greater than 80-fold. The naturally occurring anti-angiogenic phenol, 4-hydroxybenzyl alcohol, was down-regulated 5-fold. Top affected ontologies involved: (i) metabolism of bile acids, taurine, cholesterol, fatty acids and amino acids; (ii) inflammation and oxidative stress; and (iii) nicotinic cholinergic signaling. Conclusions: The plasma metabolome was differentially regulated in polyvinyl chloride workers who developed hepatic hemangiosarcoma. Ontologies potentially involved in hemangiosarcoma pathogenesis and candidate biomarkers were identified.     

Hydroisomerization of Renewable and Fossil n-Alkanes over Bifunctional Dealuminated ZSM-5 Catalysts

The hydroisomerization of two long-chain n-alkane mixtures was investigated over bifunctional Pt/H-ZSM-5 catalysts before and after dealumination of preshaped zeolite/binder pellets. The hydroisomerization over the dealuminated catalysts leads to more isomers and less cracking products. Consequently, higher ratios of multi- to mono-branched isomerization products are formed as expected for large- rather than medium-pore zeolites. This indicates a higher availability of space in the vicinity of the active sites and provides an attractive route to make medium-pore zeolites suitable for upgrading higher boiling hydrocarbon feeds.     

Clotrimazole-loaded Eudragit® RS100 nanocapsules: Preparation,characterization and in vitro evaluation of antifungal activity against Candida species

Clotrimazole is a common choice for the treatment of vulvovaginal infections, but its low solubility and some side effects pose a challenge to its application. This work evaluated the feasibility to formulate clotrimazole-loaded cationic nanocapsules using Eudragit® RS100 and medium chain triglycerides as polymer and oily core, respectively, by the method of interfacial deposition of a preformed polymer. The physicochemical characteristics of nanocapsule formulations were evaluated at 0 day and 60 days after preparation. Particle size, zeta potential, polydispersity index, pH and drug content were stable during this period. In addition, nanocapsules were able to protect clotrimazole from photodegradation under UV radiation. By the dialysis bag diffusion technique, the nanosized formulations showed prolonged release of clotrimazole by anomalous transport and first order kinetics. A microbiological study was carried out by the microdilution method and showed that nanocapsules (mean size: 144 nm; zeta potential: + 12 mV) maintained the antifungal activity of clotrimazole against Candida albicans and Candida glabrata strains susceptible and resistant to fluconazole.     

An empirical investigation on how portfolio risk management influences project portfolio success

Project risk management is recognized as essential in order to cope with the challenges arising from the environment. Literature suggests a portfolio-wide perspective for managing risks in project portfolios. However, research on risk management and its success in a project portfolio context is scarce. This study examines how portfolio risk management influences project portfolio success. Using a sample of 176 firms, this study provides evidence that portfolio risk identification, the formalization of the portfolio risk management process, and risk management culture directly influence risk transparency, whereas risk prevention, risk monitoring, and the integration of risk management into project portfolio management are directly connected to risk coping capacity. The findings also suggest that both risk transparency and risk coping capacity have a direct impact on project portfolio success. However, the results did not confirm the hypothesis that risk transparency and risk coping capacity have a complementary effect on success. Implications for scholars and project portfolio managers are discussed.     

Characteristics of wet‐spun and thermally treated poly acrylonitrile fibers

The performance of carbon fibers depends on the quality of the precursor and the conditions of the thermal treatment. In detail, for a PAN precursor fiber the viscosity of a spinning dope and the draw ratio during the spinning process needs to be considered. Through wet spinning, different types of PAN precursor fibers with defined spinning parameters, including solid content, solvent content in a bath, and especially draw ratio resulting in defined cross section diameters, were fabricated and analyzed with tensile tests, density investigations, SEM, TGA‐MS, FTIR, and XRD. The results show that the mechanical properties of the fibers correlate to crystallinity. The cross section diameter is strongly related to the morphology of the fibers after thermal treatment. By extending the postdrawing of PAN fibers high tenacities were obtained at the cost of the cross section shape. In addition, TGA measurements reveal trapped residues of the wet spinning process as well as show several chemical reactions takes place at the same time at different temperatures. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43698.     

Grauwasserreinigung mit einer Sumpfpflanzenmatte unter Praxisbedingungen

There is increasing interest worldwide in the decentralized treatment of gray water. Since ground‐level areas are generally costly, gray‐water treatment can also be carried out using helophyte mats on the roofs of buildings as an alternative. Alongside the water treatment itself, this process also has a positive effect on the indoor climate in the building. In a test carried out under realistic conditions, it was shown that a helophyte mat with a root‐layer depth of 0.1 m and with hydraulic loads per unit up to 15 L m^?2d^?1 is suitable for treating typical gray water from a residential building.     

Interleukin‐4‐Clicked Surfaces Drive M2 Macrophage Polarization

Driving macrophage (M?) polarization into the M2 phenotype provides potential against inflammatory diseases. Interleukin‐4 (IL‐4) promotes polarization into the M2‐M? phenotype, but its systemic use is constrained by dose‐limiting toxicity. Consequently, we developed IL‐4‐decorated surfaces aiming at sustained and localized activity. IL‐4 muteins were generated by genetic code expansion; Lys42 was replaced by unnatural amino acids (uAAs). Both muteins showed cell‐stimulation ability and binding affinity to IL4Rα similar to those of wt‐IL‐4. Copper‐catalyzed (CuAAC) and copper‐free strain‐promoted (SPAAC) 1,3‐dipolar azide–alkyne cycloadditions were used to site‐selectively anchor IL‐4 to agarose surfaces. These surfaces had sustained IL‐4 activity, as demonstrated by TF‐1 cell proliferation and M2, but not M1, polarization of M‐CSF‐generated human M?. The approach provides a blueprint for the engineering of cytokine‐activated surfaces profiled for sustained and spatially controlled activity.     

Cleaning capacity of octenidine as root canal irrigant: A scanning electron microscopy study

The aim of this study was to assess the cleaning capacity of the octenidine hydrochloride (OCT) used as root canal irrigant by scanning electron microscopy (SEM) analysis. Sixty human unirradicular extracted teeth were randomly distributed in 6 groups (n = 10) according to irrigant solutions which were used during root canal preparation: G1, 0.1% OCT; G2, 2% chlorhexidine (CHX); G3, 2.5% sodium hypochlorite (NaOCl); G4, OCT + 17% ethylenediaminetetraacetic acid (EDTA); G5, 2.5% NaOCl + 17% EDTA and G6, distilled water. All specimens were instrumented with ProTaper system up to F4. Teeth were sectioned and prepared for SEM. The smear layer was evaluated using a 5‐score system and the data were analyzed by Kruskal–Wallis and Dunn (α = 0.05). In all root canal thirds there was no significant difference between OCT, CHX, NaOCl, and water groups (p > .05), and these groups showed higher smear layer values than NaOCl + EDTA and OCT + EDTA groups (p < .05). There was no significant difference between NaOCl + EDTA and OCT + EDTA groups (p > .05). It was concluded that OCT used as a single root canal irrigant presented poor cleaning capacity and could be used in association with a final irrigation with EDTA to obtain smear layer removal.     

Experimental Design Applied for Cost and Efficiency of Antioxidants in Biodiesel

Oxidation stability is a parameter of great importance for biodiesel quality control to both producers and subsequent consumers. To maintain the quality of biodiesel, currently the most effective and economical method is the addition of antioxidants that prevent or retard the biofuel oxidation reaction. In this study, efficiency and cost of synthetic antioxidants added to B100 biodiesel from soybean oil and pork fat were evaluated, using butylhydroxyanisole (BHA), butylhydroxytoluene (BHT) and tert-butylhydroquinone (TBHQ), in pure form or in mixtures, according to a simplex-centroid mixture experimental design. Results demonstrate an increased induction period (IP) in all trials when compared to the control sample, and TBHQ was the only antioxidant alone that met all the specification standards, while BHT and BHA alone met only the American standard specifications. The antioxidant mixture that presented the highest synergistic effect was that of TBHQ and BHA. Multi-response optimization indicated an optimum formulation containing 75 % TBHQ and 25 % BHA with an IP of 7.27 h at 110 °C and the antioxidant mixture cost of 31.31 USD, to be added for a ton of biodiesel. This simplex-centroid mixture experimental design shows an ability to be applied in the biodiesel, oils and fats industry to evaluate the oxidation stability and the occurrence of synergism between different mixtures of synthetic or natural antioxidants and their costs.