Microstructure induced ultra-high energy storage density coupled with rapid discharge properties in lead-free Ba0.9Ca0.1Ti0.9Zr0.1O3–SrNb2O6 ceramics

Novel lead-free (1-x)Ba_0·9Ca_0·1Ti_0·9Zr_0·1O₃-xSrNb₂O₆ ceramics were synthesized via a two-step high energy ball milling process. The evolution of microstructural properties, phase transformation, and energy storage characteristics was comprehensively investigated to assess the applicability of material in multi-layered ceramic capacitors. The substitution of SrNb₂O₆ (SNO) in Ba_0·9Ca_0·1Ti_0·9Zr_0·1O₃ (BTCZ) has resulted in substantial improvement in materials density along with a small increase in the grain size of the synthesized ceramic. A thorough microstructural investigation indicates an excellent dispersibility and compatibility between BTCZ and SNO phases. With an increase in SNO substitution, a transition from typical ferroelectric to relaxor ferroelectric has been observed, which has led to a significantly slimmer ferroelectric loop along with frequency dispersive dielectric properties. The optimized composition (i.e., x = 0.10) exhibits an ultra-high recoverable energy density of 2.68 J/cm³ along with a moderately high energy efficiency of 83.4%. Further, SNO substituted samples have also shown an enhancement in breakdown strength. The improvement in energy storage performance and breakdown strength of SNO substituted BTCZ composites are mainly attributed to relatively homogeneous grain morphology, optimum grain size, microstructural density, and improved grain boundary interface.     

A Dynamic Inertial Weight Strategy in Micro PSO for Swarm Robots

Wireless Personal Communications - A relatively new area of research and development is Swarm Robotics. It is a part of the swarm intelligence field. In the proposed paper, we shall use swarm...     

Cross-Layer Energy Based Clustering Technique for Heterogeneous Wireless Sensor Networks

Wireless Personal Communications - Effect of combination of dual split ring resonator and electromagnetic bandgap structures over substrate integrated waveguide and half-mode substrate integrated...     

Study of Corrosion Behavior and In Vitro Bioactivity of Single NbSi2 and Duplex NbSi2/Nb5Si3 Coatings on Nb Substrates for Biomedical Applications

Protection of Metals and Physical Chemistry of Surfaces - Single NbSi2 and duplex NbSi2/Nb5Si3 coatings were successfully applied on Nb substrates using halide activated pack cementation (HAPC)...     

Mammalian-Cell-Driven Polymerisation of Pyrrole

A model cancer cell line was used to initiate polymerisation of pyrrole to form the conducting material polypyrrole. The polymerisation was shown to occur through the action of cytosolic exudates rather than that of the membrane redox sites that normally control the oxidation state of iron as ferricyanide or ferrocyanide. The data demonstrate for the first time that mammalian cells can be used to initiate synthesis of conducting polymers and suggest a possible route to detection of cell damage and/or transcellular processes through in situ and amplifiable signal generation.     

Thermal-aware task allocation and scheduling for periodic real-time applications in mesh-based heterogeneous NoCs

Real-Time Systems - With continuous technology scaling, the power density and hence the temperature of Network-on-Chip (NoC) may increase rapidly. This in-turn degrades the performance of the chip...     

Comparison between the use of thermoplasticized gutta‐percha and a polydimethyl siloxane‐based material in filling internal resorptive cavities using spiral computed tomography

To evaluate the fill of internal resorption cavities obturated with thermoplasticized gutta‐percha and GuttaFlow2 using CT scan. Twenty human maxillary anterior teeth were selected and root canals were prepared using ProTaper system to size F3. Irrigation was performed with 5 ml of 2.5% sodium hypochlorite (NaOCl) and 5 ml of 17% ethylenediaminetetraacetic acid (EDTA). Each root was then sectioned horizontally into two halves and semicircular cavities were prepared around the periphery of the root canal opening of each root half, using a round bur. Both the root halves were then fixed using cyanoacrylate glue. All the specimens were subjected to preoperative CT scan analysis to determine the volume of internal cavities. The samples were then randomly divided into two groups. In Group 1, the specimens were obturated with thermoplasticized gutta‐percha (E&Q system) and specimens in Group 2 were obturated using GuttaFlow2. All specimens were then subjected to postoperative CT scan analysis. The volume of voids in internal resorptive cavities were calculated, which was then used to estimate the amount of gutta‐percha filled. There was no significant difference in volume of internal resorptive cavities between thermoplasticized gutta‐percha and GuttaFlow2 groups before obturation (p = 0.466). However, after obturation there was a significant difference between both the groups, in which GuttaFlow2 demonstrated better fill (p = .014). Thermoplasticized gutta‐percha filled 81% of internal resorptive cavity while GuttaFlow2 filled 91%, respectively. GuttaFlow2 showed better fill than thermoplasticized gutta‐percha in the filling of internal resorptive cavities.     

Non-blind Arnold scrambled hybrid image watermarking in YCbCr color space

Microsystem Technologies - Due to fast technological development, human beings generally depend upon computer and other digital equipments in different areas of concern/applications. Therefore,...     

Performance evaluation of breast lesion detection systems with expert delineations: a comparative investigation on mammographic images

Multimedia Tools and Applications - Performance of computerized diagnostic systems yearning to be approved by medical regulatory bodies must meet the expectations of human experts. Highly accurate...     

Structurally Diverse Histone Deacetylase Photoreactive Probes: Design,Synthesis, and Photolabeling Studies in Live Cells and Tissue

Histone deacetylase (HDAC) activity is modulated in vivo by post-translational modifications and formation of multiprotein complexes. Novel chemical tools to study how these factors affect engagement of HDAC isoforms by HDAC inhibitors (HDACi) in cells and tissues are needed. In this study, a synthetic strategy to access chemically diverse photoreactive probes (PRPs) was developed and used to prepare seven novel HDAC PRPs 9 – 15 . The class I HDAC isoform engagement by PRPs was determined in biochemical assays and photolabeling experiments in live SET-2, HepG2, HuH7, and HEK293T cell lines and in mouse liver tissue. Unlike the HDAC protein abundance and biochemical activity against recombinant HDACs, the chemotype of the PRPs and the type of cells were key in defining the engagement of HDAC isoforms in live cells. Our findings suggest that engagement of HDAC isoforms by HDACi in vivo may be substantially modulated in a cell- and tissue-type-dependent manner.