Perspectives on management theory’s application in the internet of things research

Information Systems and e-Business Management - The growing use of the internet of things (IoT) has provided businesses with a new opportunity. This study performed a systematic literature review...     

A new design strategy for DC/DC LLC resonant converter: Concept,modeling, and fabrication

In this paper, a new design procedure for LLC converter has been introduced. In fact, this method is a computer-based design algorithm based on a numerical technique. In the process of designing, the value of the resonant element is obtained by solving the LLC converter fundamental equation. This converter will be controlled by using state feedback, such as output voltage variable. As a matter of fact, in a control system, the change of output voltage (because of load variation) will affect the switching frequency, so the output voltage will be tuned. In the designing process, the fundamental equations of LLC converter are obtained, and the value of the resonant elements is calculated. Also, a comparison analysis is carried out between the proposed and typical methods. The simulation is done to investigate the validity of the proposed method. Moreover, a prototype is manufactured, and the experimental test is done to evaluate its applicability.     

数值模拟铸件充型过程中的液/固两相流动

铸造过程中熔融金属内的固体渣粒的运动轨迹是非常重要的。文中给出了粒子传输轨迹的数学模型,该数学模型采用显示法来确定粒子的位置。模拟研究结果与用其它数学模型的模拟结果比较,吻合良好。该模型可用于固体粒子位置的确定,并应用到SUTCAST软件中。     

Effect of fiber angle on LYP steel shear walls behavior简

Steel shear wall（SSW） was properly determined using numerical and experimental approaches.The properties of SSW and LYP（low yield point） steel shear wall（LSSW） were measured.It is revealed that LSSW exhibits higher properties compared to SSW in both elastic and inelastic zones.It is also concluded that the addition of CFRP（carbon fiber reinforced polymers） enhances the seismic parameters of LSSW（stiffness,energy absorption,shear capacity,over strength values）.Also,stress values applied to boundary frames are lower due to post buckling forces.The effect of fiber angle was also studied and presented as a mathematical equation.     

Low-power high-speed interconnection networks in NOC using multi-valued current-mode techniques

With the fast developments and growth of electronic applications and a great demand for increasing the speed of processors, VLSI circuits and on-chip interconnections the ＂Networks-On-Chip＂ （NOC） is the best solution for ＂System-On-Chip＂ （SOC）. The most fundamental part of networks On-Chip is the On-Chip interconnection. The model presented in this article describes the method of sending data on On-Chip interconnection by using a current-mode multi-valued logic instead of voltage-mode in order to increase speed and reduce the number of interconnection wires.     

Low temperature J-resistance curve determination of asphalt concrete using wavelet-Radon transform

A single specimen test using the three point single edge notched beam configuration at low temperatures for obtaining hot mix asphalt （HMA） resistance curves is developed.Resistance curves are obtained for mixtures at six temperature levels of＋5,0,-5,-10,-15,and-20 ℃ and three binder contents of 4％,4.5％,and 5％.Crack extension increments during the test are measured by means of an image processing technique using Radon transform and feature extraction.All the specimens exhibit a rising R-curve,indicating ductility and toughening mechanisms in the ductile-quasi brittle fracture of the mixture.It is observed that the reduction of temperature results in a further tendency of the mixture for unstable crack growth and less subcritical crack length.It is also shown that using the binarization process,an automatic index can be developed that can represent the extent of brittleness and extent of the low temperature in which the cracking has occurred.     

Thinned-ECOC ensemble based on sequential code shrinking

Error-correcting output coding (ECOC) is a strategy to create classifier ensembles which reduces a multi-class problem into some binary sub-problems. A key issue in designing any ECOC classifier refers to defining optimal codematrix having maximum discrimination power and minimum number of columns. This paper proposes a heuristic method for application-dependent design of optimal ECOC matrix based on a thinning algorithm. The main idea of the proposed Thinned-ECOC method is to successively remove some redundant and unnecessary columns of any initial codematrix based on a metric defined for each column. As a result, computational cost of the ensemble is reduced while preserving its accuracy. Proposed method has been validated using the UCI machine learning database and further applied to a couple of real-world pattern recognition problems (the face recognition and gene expression based cancer classification). Experimental results emphasize the robustness of Thinned-ECOC in comparison with existing state-of-the-art code generation methods.     

A model for stress-dependence of apparent permeability in nanopores of shale gas reservoirs

Predicting long-term production from gas shale reservoirs is a challenging task due to changes in effective stress and permeability during gas production. Unlike coal, the variation of sorbing gas permeability with pore pressure in shale does not always feature a biphasic trend under a constant confining pressure. The present contribution demonstrates that the biphasic dependence of permeability on pore pressure depends on a number of physical and geometrical factors, each with a distinct impact on gas permeability. This includes pore size, adsorption isotherm, and the variation of gas viscosity with pore pressure. A single-capillary model is proposed for the apparent permeability of real gas in shale. Results indicate that the biphasic relation between apparent permeability and pore pressure is prevalent when the sorbing gas flows in sufficiently small pores. In addition, the effects of sorption isotherm and internal resistance of nonideal gas to flow cannot be ignored.     

Modeling dynamic viscosity of n-alkanes using LSSVM technique

One of the important thermophysical properties is viscosity which expresses the resistance of fluid to flow. The least squares support vector machine (LSSVM) algorithm is proposed as a novel method for prediction of dynamic viscosity of different normal alkanes in a wide range of pressure and temperature. As this study is purely computational, 228 experimental data points were gathered from literature for training and validation of the model. The outcomes of the LSSVM algorithm were compared with the actual data with acceptable average absolute relative deviation and the coefficient of determination (R²) of 1.014 and 0.9968, respectively. The comparisons showed that the predicting model has the potential of prediction of n-alkane dynamic viscosity in terms of pressure, temperature, and carbon number of n-alkane, so this strategy can be used as a simple tool for predicting the behavior of reservoir fluids.