Investigation of thermal performance of SAC variables using fuzzy logic based expert system

The thermal performance of a solar air collector (SAC) is investigated experimentally under the different climatic conditions of north eastern India using fuzzy logic based expert system (FLES). The FLES based on subtractive clustering (SC) with the fuzzy logic method where here, SC is used for extraction of optimal fuzzy IF-THEN rules while a fuzzy logic is used for modeling of SAC variables. This work considered four input variables [like mass flow rate (m), collector tilt angles (θ), solar radiation (Q), temperature (T)] and the four output variables [i.e. efficiency (η), exergetic efficiency (η_II), temperature rise (∆T), and pressure drop (∆P)]. First, 272 trials of experimentation on SAC are performed by varying m from 0.0078 to 0.0118 kg/s and θ from 30 to 60°, whereas the variation of metrological data is obtained in different working days. Then modeling and parametric analysis is carried out for SAC. Experimental results reveal that the value of η increases with the increase in m, Q, T and θ up to 45°. The higher value of m results in a higher value of ∆P and that reduces the value of η_II. Also, FLES model provides comparable and acceptable values for SAC. At last, validation of the FLES model is done via published data to confirm the results.

     

APuML: An Efficient Approach to Detect Mobile Phishing Webpages using Machine Learning

Wireless Personal Communications - The recent trend in wireless technology has been tremadously increased the demand of higher frequency bands from every corners of the mobile technology. As next...     

A Comprehensive Survey of Emergency Communication Network and Management

Wireless Personal Communications - The performance of wireless communication network is important in emergency rescue operations while ensuring optimum usage of limited wireless resources. Due to...     

Analytical method to detect adulteration of ground roasted coffee

In this work, an HPLC-based detection method for identification of coffee powder adulterated with roasted barley, wheat and rice powders was developed by using various chemical indices such as monosaccharides (mannose, rhamnose, glucose, galactose, xylose and arabinose), trigonelline and nicotinic acid. As a quality assurance, the recovery efficiencies were 84.1%–90.2% for the monosaccharides, 113.6% for trigonelline and 114.9% for nicotinic acid. The limits of detection were 0.047–0.070 mmol kg⁻¹ for the monosaccharides, 0.209 mg kg⁻¹ for trigonelline and 0.117 mg kg⁻¹ for nicotinic acid. The glucose concentration in coffee samples adulterated with roasted barley, wheat and rice at 99:1 (w/w) mixing ratio was significantly different from the control coffee sample. The limit of discrimination from adulterated coffee samples was 1% (w/w) when glucose was used as a chemical index (P < 0.05).     

Mixed convective heat transfer enhancement in a ventilated cavity by flow modulation via rotating plate

The present study numerically explores the mixed convection phenomena in a differentially heated ventilated square cavity with active flow modulation via a rotating plate. Forced convection flow in the cavity is attained by maintaining external fluid flow through an opening at the bottom of the left cavity wall while leaving it through another opening at the right cavity wall. A counter-clockwise rotating plate at the center of the cavity acts as an active flow modulator. Moving mesh approach is used for the rotation of the plate and the numerical solution is achieved using arbitrary Lagrangian-Eulerian finite element formulation with a quadrilateral discretization scheme. Transient parametric simulations have been performed for various frequency of the rotating plate for a fixed Reynolds number (Re) of 100 based on maximum inlet flow velocity while the Richardson number (Ri) is maintained at unity. Heat transfer performance has been evaluated in terms of spatially averaged Nusselt number and time-averaged Nusselt number along the heated wall. Power spectrum analysis in the frequency domain obtained from the fast Fourier transform analysis indicates that thermal frequency and plate frequency start to deviate from each other at higher values of velocity ratio (>4).     

Hydrodynamic dispersion of reactive solute in a Hagen-Poiseuille flow of a layered liquid

An analysis of the solute dispersion in the liquid flowing through a pipe by means of Aris-Barton's ⒈method of moments',under the joint effect of some finite yield stress and irreversible absorption into the wall is presented in this paper.The liquid is considered as a three-layer liquid where the center region is Casson liquid surrounded by Newtonian liquid layer.A significant change from previous modelling exercises in the study of hydrodynamic dispersion,different molecular diffusivity has been considered for the different region yet to be constant.For all time period,finite difference implicit scheme has been adopted to solve the integral moment equation arising from the unsteady convective diffusion equation.The purpose of the study is to find the dependency of solute transport coefficients on absorption parameter,yield stress,viscosity ratio,peripheral layer variation and in addition with various diffusivity coefficients in different liquid layers.This kind of study may be useful for understanding the dispersion process in the blood flow analysis.     

Implication of molecular orientation on charge transport and gas sensing characteristics of cobalt–phthalocyanine thin films

Charge transport and gas sensing characteristics of cobalt phthalocyanine films deposited along (ATB) and perpendicular (PTB) to the natural twin boundaries of (0 0 1) LaAlO₃ substrate have been investigated. The charge carrier mobility of ATB films (∼5 cm² V⁻¹ s⁻¹) is five orders of magnitude higher compared to that of PTB films (∼7 × 10⁻⁵ cm² V⁻¹ s⁻¹), suggesting that twin boundaries acts like a template for ordering of molecules. The ATB films on exposure to ammonia showed a reversible increase of resistance, with fast response and recovery. In contrast PTB films showed same sensitivity, but exhibits base resistance drift along with sluggish response.     

How similar are two-unit bicycle and motorcycle crashes?

This paper explores the similarities and differences between bicycle and motorcycle crashes with other motor vehicles. If similar treatments can be effective for both bicycle and motorcycle crashes, then greater benefits in terms of crash costs saved may be possible for the same investment in treatments. To reduce the biases associated with under-reporting of these crashes to police, property damage and minor injury crashes were excluded. The most common crash type for both bicycles (31.1%) and motorcycles (24.5%) was intersection from adjacent approaches. Drivers of other vehicles were coded most at fault in the majority of two-unit bicycle (57.0%) and motorcycle crashes (62.7%). The crash types, patterns of fault and factors affecting fault were generally similar for bicycle and motorcycle crashes. This confirms the need to combat the factors contributing to failure of other drivers to yield right of way to two-wheelers, and suggest that some of these actions should prove beneficial to the safety of both motorized and non-motorized two-wheelers. In contrast, child bicyclists were more often at fault, particularly in crashes involving a vehicle leaving the driveway or footpath. The greater reporting of violations by riders and drivers in motorcycle crashes also deserves further investigation.     

Synthesis and characterization of niobium doped hexagonal tungsten bronze in the systems,Cs<Subscript>x</Subscript>Nb<Subscript>y</Subscript>W<Subscript>1−y</Subscript>O<Subscript>3</Subscript>

Samples of nominal compositions, Cs_0.25Nb _y W_1−y O₃ and Cs_0.3Nb _y W_1−y O₃ with 0.0 ≤ y ≤ 0.25 and 0.0 ≤ y ≤ 0.3 were synthesized using appropriate amounts of Cs₂WO₄, WO₃ and WO₂ in evacuated and closed silica glass tubes at 800 °C. The polycrystalline products contain hexagonal shaped crystals of up to 15 μm diameter as long as y ≤ 0.15. X-ray powder patterns of the samples reveal the formation of hexagonal tungsten bronze (HTB-I) type phase with y < 0.1. A mixture of HTB-I and an analogous less reduced hexagonal tungsten bronze (HTB-II) type phase is seen when y ≥ 0.1. HTB-II content increases with increasing y, revealing close similarity to bronzoid type phases when y = x. Results of SEM/EDX analysis also support a partial substitution of tungsten by niobium in the HTB-I type phase. Infrared absorption and optical reflectivity data shows the effect of increasing amount of non-metallic phase for y > 0.1 and the effect of counterdoping by Nb⁵⁺/W⁵⁺ substitution in the metallic HTB-I type phase for y ≤ 0.1, respectively. Reinvestigations in the system Rb_0.3Nb _y W_1−y O₃ (0.0 ≤ y ≤ 0.175) show similar results with increasing content of HTB-II type phase related with y.