Influence of the Charge State of Xenon Ions on the Depth Distribution Profile Upon Implantation into Silicon

Semiconductors - Experimental depth distributions of the concentration of implanted xenon ions depending on their charge state and irradiation energy are presented. Xenon ions in charge states q =...     

Engineering of Saccharomyces cerevisiae for the production of (+)-ambrein

The triterpenoid (+)-ambrein is the major component of ambergris, a coprolite of the sperm whale that can only be rarely found on shores. Upon oxidative degradation of (+)-ambrein, several fragrance molecules are formed, amongst them (−)-ambrox, one of the highest valued compounds in the perfume industry. In order to generate a Saccharomyces cerevisiae whole-cell biocatalyst for the production of (+)-ambrein, intracellular supply of the squalene was enhanced by overexpression of two central enzymes in the mevalonate and sterol biosynthesis pathway, namely the N-terminally truncated 3-hydroxy-3-methylglutaryl-CoA reductase 1 (tHMG) and the squalene synthase (ERG9). In addition, another key enzyme in sterol biosynthesis, squalene epoxidase (ERG1) was inhibited by an experimentally defined amount of the inhibitor terbinafine in order to reduce flux of squalene towards ergosterol biosynthesis while retaining sufficient activity to maintain cell viability and growth. Heterologous expression of a promiscuous variant of Bacillus megaterium tetraprenyl-β-curcumene cyclase (BmeTC-D373C), which has been shown to be able to catalyse the conversion of squalene to 3-deoxyachillol and then further to (+)-ambrein resulted in production of these triterpenoids in S. cerevisiae for the first time. Triterpenoid yields are comparable with the best microbial production chassis described in literature so far, the methylotrophic yeast Pichia pastoris. Consequently, we discuss similarities and differences of these two yeast species when applied for whole-cell (+)-ambrein production.     

Power-to-X im Kontext der Energiewende und des Klimaschutzes in Deutschland

In order to examine the impact of different Power-to-X technologies on the transformation of the German energy system and meeting the climate change mitigation goals, a cross-sectoral energy system model was developed. The results show that Power-to-X will be essential for a successful energy transition. Especially in applications where high energy densities are required and only few other options for defossilization exist, Power-to-X technologies become essential.     

Experimental investigations and constitutive modeling of cyclic interface shearing between HDPE geomembrane and sandy gravel

This paper presents the results of experimental investigations and constitutive modeling of cyclic interface shearing between HDPE geomembrane and cohesionless sandy gravel. A series of cyclic interface shear tests was performed using a large-scale cyclic shear apparatus with servo controlled system. Particular attention was paid to the influences of the amount of shear-displacement amplitude, number of cycles, shear rate and the normal pressure on the mechanical response. The experimental results show that the path of the shear stress against the cyclic shear displacement is strongly non-linear and forms a closed hysteresis loop, which is pressure dependent, but almost independent of the shear rate. For small shear-displacement amplitudes, the obtained damping ratio is significantly greater than zero, which is different to the behavior usually observed for cyclic soil to soil shearing. In order to describe the pressure dependency of the hysteresis loop using a single set of constitutive parameters, new approximation functions are put forward and embedded into the concept of the Masing rule. Further, a new empirical function is proposed for the damping ratios to capture the experimental data for both small and large cyclic shear-displacement amplitudes. The included model parameters are easy to calibrate and the new functions may also be useful in developing enhanced constitutive models for the simulation of the cyclic interface shear behavior between other geosynthetics and soils.     

Fire‐retardant hybrid thermosetting resins from unsaturated polyesters and polysilazanes

This introduces an organic–inorganic thermosetting hybrid resin system based on unsaturated polyester and polysilazanes. It shows the chemical modification of unsaturated polyester structures by end capping to enable the combination of both components. In general, halogen‐free unsaturated polyesters are not fire‐retardant and have to be equipped with additives. Fillers and intumescent additives are preponderantly used in today's fire‐retardant formulations. In contrast to these fire‐retardants, polysilazanes act as ceramizing agents. Polysilazanes are suitable fire‐retardants for resin transfer molding due to their low viscosity. Both burning behavior and glass transition temperature (T_g) are investigated as important application properties. In contrast to state‐of‐the‐art fire‐retardant formulations polysilazane‐based thermosetting hybrid resins burn with high intensity and fast extinction. Therefore, total heat and smoke emission is decreased. The formation of ceramic structures during burning results in high residual mechanical properties and a low mass loss. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40375.     

Model based prognosis of contaminant leaching for reuse of demolition waste in construction projects

In this study, groundwater contamination from recycled demolitian waste in road constructions is assessed using predictions of leachate concentrations. Numerical transport simulations are performed for three scenarios (a parking lot, a noise protection barrier, and road), and using a number of characteristic subsoils of Germany, to estimate the breakthrough of different contaminant classes at the groundwater table. Conservative tracer breakthrough times (BTT) primarily depend on subsoil hydraulic properties, for organic pollutants KOC and subsoil OC are the controlling parameters. Significant concentration reductions from dispersion only occur when source concentrations decrease prior to contaminant breakthrough. If source concentrations remain high for long periods relative to peak BTT, concentration breakthrough is undamped. Accounting for biodegradation reduces breakthrough concentrations significantly. For the “noise protection barrier” and “road” scenarios, capillary barrier effects cause the seepage water to partially bypass the recycling material. Accounting for this bypass flow and spatial averaging across the constructions reduces concentrations by about 30–40?%.     

PAH fluxes in the Laja Lake of south central Chile Andes over the last 50 years: evidence from a dated sediment core

This paper reports the occurrence of polyaromatic hydrocarbons (PAHs) deposition inferred from a sediment core of an Andean lake in south central Chile. Sediments were carefully collected from one of the deepest section of the lake and sliced every 1 cm. The samples were analyzed for PAHs, (137)Cs, (210)Pb, organic carbon and grain-size. The stratigraphic chronology and the sedimentation rates were estimated using the sedimentary signature left by the (137)Cs and (210)Pb fallout as temporal markers. PAHs were quantified by HPLC-fluorescence detection (HPLC-Fluorescence). 15 priority EPA PAHs were analyzed in this study. Based on these results, PAH deposition over the last 50 years was estimated (a period characterized by an important intervention in the area). PAH concentration ranged from 226 to 620 ng g(-1) d.w. The highest concentrations of PAHs were found in the core's bottom. The PAH profile is dominated by the presence of perylene indicating a natural source of PAH. In addition, two clear PAH deposition periods could be determined: the most recent with two-four rings PAHs, the older one with five-seven rings predomination. Determined fluxes where 71 to 972 microg m(-2) year(-1), dominated by perylene deposition. PAH levels and fluxes are lower compared to the levels found in sediments from remote lakes in Europe and North America. It is concluded that the main source of PAHs into the Laja Lake sediments are of natural origin.     

Identification of the Thermodynamically Stable Fe‐Containing Phase in Aged Cement Pastes

Current developments in cement chemistry increasingly rely on predictive thermodynamic modeling of the phase composition in cementitious composites with the aim of linking the performance of the material with the phase composition of the material. This approach requires identification of the cement phases that form in hydrating cementitious materials using standard techniques, such as X‐ray diffraction (XRD) and thermal analysis (DTA, TGA), but also state‐of‐the‐art synchrotron‐based techniques, in particular for those cases in which the signals of solid solutions overlap in XRD and TGA measurements. In this study, two ordinary Portland cements, with different chemical compositions and subject to different hydration times (~10, ~50 yr), were investigated aiming at identifying the most stable Fe‐containing cement phase in the cement pastes. The Fe‐containing cement phases and their solid solutions with the Al analogues in the complex cement matrix were analyzed with X‐ray absorption spectroscopy, indicating the formation of a mixed Fe–Al siliceous hydrogarnet as the major Fe‐containing phase. The presence of this phase after long hydration periods and upon selective dissolution of the pastes further indicates that, independent of the chemical compositions of cements, formation of the mixed Fe–Al siliceous hydrogarnet is thermodynamically favored in aged pastes, which is supported by published thermodynamic calculations.     

Investigation of the Impacts of Gamma Radiolysis on an Advanced TALSPEAK Separation

The advanced TALSPEAK process is a selective solvent extraction that utilizes 2-ethylhexylphosphonic acid mono-2-ethylhexyl ester (HEH[EHP]) to separate lanthanide elements from trivalent actinides, which are held back in the aqueous phase by N-hydroxylethyl-N,N’,N’-ethylenediamine triacetic acid (HEDTA) buffered by citric acid. Gamma irradiation of an experiment containing Eu(III) and Am(III) as representative lanthanide and actinide elements resulted in higher distribution ratios of both and separation factors which decreased in an exponential fashion with increasing dose. Analysis of the reagents showed that the HEDTA concentration also decreased in an exponential fashion, strongly suggesting that degradation was correlated with loss of separation selectivity. In contrast, the concentration of citrate was unaffected, and while the concentration of HEH[EHP] did decrease, its dose-dependent kinetic profile indicated that it was not limiting partitioning. A second set of experiments were conducted using a citrate concentration that was 7.5 X higher, with the expectation that citrate would protect the HEDTA by scavenging radiolytically formed OH radicals. HEDTA degradation was significantly mitigated at higher gamma doses, but the Eu-Am separation was worse than in the low citrate experiments, presumably because at the high citrate concentrations, the Eu-citrate complexes formed in abundances competitive with the Am complexes, and are more effectively held back in the aqueous phase.