Analysis of electrocardiograms during atrial fibrillation

The research discussed in this article is motivated by the search for an optimal classification of the different types of atrial fibrillation (AF) on the basis of recorded atrial signals. This would facilitate the selection of an optimal therapy. This article focuses on the biophysical models of the genesis of ECG waveforms during AF. The model of the electric activity of the atria was found to have sufficient realism to be used to describe the electric sources during AF. The inclusion of the volume conduction model resulted in electrocardiographic signals that are in all aspects similar to those observed clinically. The model is currently applied to solve various problems related to optimal signal preprocessing and extraction of features in AF signals for the classification of AF abnormalities. The biophysical model of the atrial activity is an essential element in this research, since it is capable of describing the electric source specifications derived from different hypotheses relating to the etiology of AF     

Associative retuning in the thalamic source of input to the amygdala and auditory cortex: Receptive field plasticity in the medial division of the medial geniculate body.

The medial division of the medial geniculate body (MGm) projects to the lateral amygdala and the upper layer of the auditory cortex and develops physiological plasticity rapidly during classical conditioning. The effects of learning on frequency receptive fields (RFs) in the MGm of the guinea pig have been determined. Classical conditioning (tone–footshock), as indexed by rapid development of conditioned bradycardia, produced conditioned stimulus (CS)–frequency specific RF plasticity: increased response at the CS frequency with decreased responses at other frequencies, both immediately and after a 1-hr retention period. Sensitization training produced only general changes in RFs. These findings are considered with reference to both the elicitation of amygdala-mediated, fear-conditioned responses and the mechanism of retrieval of information stored in the auditory cortex during acquisition. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A DSS for Production Planning

This paper presents a decision support system designed to aid the production planner in choosing the values of the principle parameters governing just-in-time manufacturing. The DSS uses a knowledge base composed of data from simulations of the production of the entire product line under systematically varied conditions. The planners may add data from actual production experience as it is obtained. The stochastic dominance outranking method of Martel and Zaras allows the identification of clusters of parameters that respect the preferences of the decision maker. When launching an order for a product, the decision maker may judge certain sets of parameters to be equivalent. A visual interactive simulation model will then allow their comparison according to three performance criteria.     

On the role of conserved proline residues in the structure and function of Clostridium pasteurianum 2[4Fe-4S] ferredoxin

The widespread occurrence of Pro residues adjacent to Cys ligandsin the sequences of [4Fe-4S] electron transfer proteins hasnot yet found a functional basis. The two such Pro of Clostridiumpasteurianum 2[4Fe-4S] ferredoxin have been probed by site-directedmutagenesis. Any one of them, but not both simultaneously, canbe substituted without impairing the proper folding of the protein.The reduction potentials of the ferredoxin variants fall ina narrow range of <20 mV above the potential of the nativeprotein. The biological activities with C.pasteurianum hydrogenaseand pyruvate-ferredoxin oxidoreductase do not change significantly,except when Lys replaces Pro. In these cases, the data suggestthat the two clusters of 2[4Fe-4S] ferredoxin may not alwaysbe equivalent in the interaction with the redox partners. Destabilizationof the structure has been observed as the consequence of theProl9 or Pro48 substitutions. Using 2-D NMR, this effect hasbeen associated with perturbations of both the hydrogen bondnetwork and one amino acid side chain around the [4Fe-4S] clusters.Thus, the conserved Pro found in the binding motif of [4Fe-4S]clusters in proteins strongly stabilizes the active site butdoes not play an essential role in the mechanism of electrontransfer.     

Sulfate attack of concrete building foundations induced by sewage waters

A case history of a severe degradation of concrete foundation plinths and piers of an about-35-year-old building located in Northern Italy is described. Significant amounts of gypsum, near ettringite and/or thaumasite were detected by X-ray diffraction analyses performed on ground concrete samples. Large gypsum crystals were mainly located at the interface between the cement paste and aggregates, as observed by scanning electron microscopy coupled to energy-dispersive spectroscopy microanalysis. The degradation effects increased with decreasing the distance of concrete structures from an absorbing well located in the courtyard of the building. The well was recognized as the sulfate source due to the microorganism metabolism of sulfur compounds present in the sewage. Consequences of this attack were a very poor bond strength between cement paste and aggregates and a severe cracking of the concrete cover of the steel reinforcement.     

Synthesis, structure and catalytic properties of Fe-substituted barium hexaaluminates

A sol–gel method using Ba and Al isopropylates and iron nitrate has been used to synthesise barium hexaaluminate partially substituted with iron. After calcination under oxygen at 1200°C the -alumina structure was obtained. Formation of the mixed BaFe_xAl_12-xO₁₉ phase occurred for x=1–4. XRD measurements showed a good crystallinity of the structure and expansion of unit cell parameters due to the presence of larger Fe³⁺ ions substituting Al³⁺ ones in octahedral sites only. Mössbauer spectroscopy revealed that Fe³⁺ ions are present in four different octahedral sites slightly distorted. Catalytic activity in methane combustion showed that an optimum was obtained for solid containing 2 Fe ions per unit cell: the increase of the amount of introduced iron was counterbalanced by the decrease of specific surface area. Intrinsic activities have been calculated for the four solids in both the fresh and aged states. It is observed that increasing iron content increases relative activities in the same ratio as the populations of iron located in two sites as deduced from Mössbauer spectroscopy. It is then tentatively assumed that activity is attributed to octahedrally coordinated Fe³⁺ ions in some specific sites.     

Parameters governing strain induced crystallization in filled natural rubber

A series of in situ synchrotron X-ray diffraction experiments are performed during the stretching of weakly and highly vulcanized carbon black (CB), silica and grafted silica filled natural rubber sample (NR). Conversely to literature, Mullins effect observed after one stretching cycle modifies the strain induced crystallization (SIC) behaviour of the sample. The onset of crystallization is ruled by the strain amplification induced by the filler presence. Moreover, fillers (CB and silica) behave as additional crosslinks into NR network, through filler-rubber interactions that either accelerate or slow down the crystallization rate depending on NR matrix chemical crosslink density. This is consistent with the assumption that effective network density, which is due to chemical crosslinks, entanglements, and filler-rubber interactions, controls the crystallization rate.     

Transmission electron microscopy study of extended defect evolution and amorphization in SiC under Si ion irradiation

The damage induced in 3C-SiC epilayers on a silicon wafer by 2.3-MeV Si ion irradiation for fluences of 10¹⁴, 10¹⁵, and 10¹⁶ cm⁻², was studied by conventional and high-resolution transmission electron microscopy (TEM/HRTEM). The evolution of extended defects and lattice disorder is followed in both the 3C-SiC film and Si substrate as a function of ion fluence, with reference to previous FTIR spectroscopy data. The likelihood of athermal unfaulting of native stacking faults by point defect migration to the native stacking faults is discussed in relation to damage recovery. Threshold energy densities and irradiation doses for dislocation loop formation and amorphous phase transformation are deduced from the damage depth profile by nuclear collisions. The role of electronic excitations on the damage recovery at high fluence is also addressed for both SiC and Si.     

Multi-behavior agent model for planning in supply chains: An application to the lumber industry

Recent economic and international threats to western industries have encouraged companies to increase their performance in all ways possible. Many look to deal quickly with disturbances, reduce inventory, and exchange information promptly throughout the supply chain. In other words they want to become more agile. To reach this objective it is critical for planning systems to present planning strategies adapted to the different contexts, to attain better performances. Due to consolidation, the development of integrated supply chains and the use of inter-organizational information systems have increased business interdependencies and in turn the need for increased collaboration to deal with disturbance in a synchronized way. Thus, agility and synchronization in supply chains are critical to maintain overall performance. In order to develop tools to increase the agility of the supply chain and to promote the collaborative management of such disturbances, agent-based technology takes advantage of the ability of agents to make autonomous decisions in a distributed network through the use of advanced collaboration mechanisms. Moreover, because of the highly instable and dynamic environment of today's supply chains, planning agents must handle multiple problem solving approaches. This paper proposes a Multi-behavior planning agent model using different planning strategies when decisions are supported by a distributed planning system. The implementation of this solution is realized through the FOR@C experimental agent-based platform, dedicated to supply chain planning for the lumber industry.