High-performance MIM capacitor using ALD high-k HfO/sub 2/-Al/sub 2/O/sub 3/ laminate dielectrics

For the first time, we successfully fabricated and demonstrated high performance metal-insulator-metal (MIM) capacitors with HfO/sub 2/-Al/sub 2/O/sub 3/ laminate dielectric using atomic layer deposition (ALD) technique. Our data indicates that the laminate MIM capacitor can provide high capacitance density of 12.8 fF//spl mu/m/sup 2/ from 10 kHz up to 20 GHz, very low leakage current of 3.2 /spl times/ 10/sup -8/ A/cm/sup 2/ at 3.3 V, small linear voltage coefficient of capacitance of 240 ppm/V together with quadratic one of 1830 ppm/V/sup 2/, temperature coefficient of capacitance of 182 ppm//spl deg/C, and high breakdown field of /spl sim/6 MV/cm as well as promising reliability. As a result, the HfO/sub 2/-Al/sub 2/O/sub 3/ laminate is a very promising candidate for next generation MIM capacitor for radio frequency and mixed signal integrated circuit applications.     

Fixed-order H∞ compensator design

A method is presented for the construction of fixed-order compensators to provide H_∞ norm constraint for linear control systems with exogenous disturbances. The method is based on the celebrated bounded-real lemma that predicates the H_∞ norm constraint via a Riccati inequality. The synthesis of fixed-order controllers whose dimensions are less than the order of a given plant, is demonstrated by a set of sufficient conditions along with a numerical algorithm.     

Selection of network and learning parameters for an adaptive neural robotic control scheme

This paper presents the results of a study in the design of a neural network based adaptive robotic control scheme. The neural network used here is a two hidden layer feedforward network and the learning scheme is the well-known backpropagation algorithm. The neural network essentially provides the inverse of the plant and acts in conjunction with a standard PD controller in the feedback loop. The objective of the controller is to accurately control the end position of a single link manipulator in the presence of large payload variations, variations in the link length and also variations in the damping constant. Based on results of this study, guidelines are presented in selecting the number of neurons in the hidden layers and also the parameters for the learning scheme used for training the network. Results also indicate that increasing the number of neurons in the hidden layer will improve the convergence speed of learning scheme up to a certain limit beyond which the addition of neurons will cause oscillations and instability. Guidelines for selecting the proper learning rate, momentum and fast backpropagation constant that ensure stability and convergence are presented. Also, a relationship between the r.m.s. error and the number of iterations used in training the neural network is established.     

Pervasive 2007: It's about the User

Pervasive computing is as much about the user as it is about the technology. So, the Fifth International Conference on Pervasive Computing emphasized desirability rather than just feasibility. Featured themes included user benefits, human-computer interaction, group and social interactions, context awareness, finding and positioning people and objects, and personal privacy.     

Robust State Feedback Control Through Actuators With Generalized Sector Nonlinearities And Saturation

In control systems, actuators often have nonlinear characteristics that can not be neglected. For linear systems driven by actuators satisfying the generalized sector condition, a robust state feedback controller synthesis method is proposed to achieve the ultimate boundedness control. The method is based on the linear matrix inequality approach and is easy to apply. As an important special case of the generalized sector condition, the saturation characteristic of actuators is discussed separately, and non‐conservative results are obtained.     

Complete nucleotide sequence of HTLV-II isolate NRA: comparison of envelope sequence variation of HTLV-II isolates from U.S. blood donors and U.S. and Italian i.v. drug users

Seven cardiac electrophysiology stimulators from four manufacturers (Biotronik, Bloom, Digitimer and Medtronic) in common current use are reviewed. The stimulators differ in the features provided and the design adopted to achieve these features. The number of output channels ranges from one to four, the number of extra-stimuli available ranges from two to six, and these can be delivered as a variety of sequences. Some of the stimulators (Digitimer and Bloom) are modular while others (Biotronik and Medtronic 532 series) are of an integrated design comprising a single physical unit. The design of the Medtronic EP-2 has both integrated and modular characteristics. The features of the stimulators associated with input, output, control and the user interface are specifically reviewed. The features are also compared against the published recommendations of the American Heart Association. In addition, a summary of stimulator user comments from a number of electrophysiology centres is presented. All of the stimulators fulfil, or are close to fulfilling, basic electrophysiological requirements, but some provide more complex facilities such as would be required by specialist centres.     

Migration of newly generated neurons upon ependymally derived radial guide cells in explant cultures of the adult songbird forebrain

The adult songbird forebrain undergoes neuronal production throughout adulthood, with the production of new neurons in discrete regions of the neostriatal ventricular zone. Upon mitogenesis, these new neurons migrate into the subjacent brain parenchyma along radially directed guide fibers. In long-term ventricular zone explant cultures, derived from the higher vocal center of the adult canary, newly migratory neurons were found to associate preferentially with a characteristic substrate cell type. These small, parvonuclear substrate cells formed tightly packed epithelioid sheets, in which ciliated ependymal cells were common, as recognized by both live observation and electron microscopy. A subpopulation of these cells was immunostained by monoclonal antibody 3A7, which preferentially stains the guide fiber network of the adult avian brain. These 3A7+ cells included ependymal cells and bipolar radial cells, as well as morphologically defined astrocytes. As they matured in vitro, the 3A7+ bipolar radial cells extended long, unbranching fibers, which ultimately traversed the culture substrate. Like ependymal cells, they supported neuronal migration. These cells were likely homologous to radial guide cells in vivo. Thus, neuronal migration in adult avian forebrain culture occurred upon guide cells of ependymal derivation.     

Minimum copper loss flux-weakening control of surface mounted permanent magnet synchronous motors

This study presents a novel current loop design method capable of automatic flux-weakening control with minimum copper loss for surface mounted permanent magnet synchronous motors (SPMSM). The proposed current controller can automatically re-compute the d-axis current command to defer output voltage saturation. Consequently, the motor operations in the flux-weakening region are also contained in the stable operating region. Analysis results indicate that since the output voltage vector in the flux-weakening region produced by this controller is consistently on the boundary of the maximum output voltage vector allowed by the inverter, the corresponding flux-weakening current is the optimal value in the sense of minimum copper loss. This minimum copper loss design differs from the maximum output torque design and the constant power design of the flux-weakening control methods found in the literature. Experimental results further demonstrate the feasibility of the proposed current controller and its ability to maximize the speed range of the motor drive for a given inverter capacity.     

On the leverage of high-fT transistors foradvanced high-speed bipolar circuits

A detailed study on the leverage of high-f_T transistors for advanced high-speed bipolar circuit applications is presented. It is shown that for the standard ECL (emitter-coupled logic) circuit, the leverage of high f_T is limited by the passive resistors (emitter-follower resistor and collector load resistor) and wire delay, especially in the low-power regime. For the standard NTL (nonthreshold logic) circuit, the leverage is higher due to its front-end configuration and lower power supply value. As the passive resistors are decoupled from the delay path in various advanced circuits utilizing active-pull-down schemes, the leverage of high F_T becomes more significant     

89-GHz fT room-temperature silicon MOSFETs

The authors report the implementation of deep-submicrometer Si MOSFETs that at room temperature have a unity-current-gain cutoff frequency (f_T) of 89 GHz, for a drain-to-source bias of 1.5 V, a gate-to-source bias of 1 V, a gate oxide thickness of 40 Å, and a channel length of 0.15 μm. The fabrication procedure is mostly conventional, except for the e-beam defined gates. The speed performance is achieved through an intrinsic transit time of only 1.8 ps across the active device region