Low Temperature Characteristics of the Metal–Superconductor NIS Tunneling Thermometer

We discuss the temperature dependence of a common low temperature local thermometer, a tunnel junction between a superconductor and a normal metal (NIS junction). Towards the lowest temperatures its characteristics tend to saturate, which is usually attributed to selfheating effects. In this technical note, we reanalyze this saturation and show that the temperature independent subgap current of the junction alone explains in some cases the low temperature behavior quantitatively.

     

Cellulose/acrylic acid copolymer blends for films and coating applications

Enzymatically treated cellulose was dissolved in a NaOH/ZnO solvent system and mixed together with poly(ethylene‐co‐acrylic acid) (PE‐co‐AA) or poly(acrylamide‐co‐acrylic acid) (PAA‐co‐AA) polymers, in order to improve the properties of dissolved cellulose and to prepare homogeneous cellulose‐based blends for films and coatings. The solution stage properties of the blends were evaluated by rheological methods and the precipitated dry blends were characterized by dynamic mechanical analysis, differential scanning calorimetry, and scanning electron microscopy. Paperboard coating tests done at laboratory scale showed dissolved cellulose/acrylic acid copolymer‐based blends function well as coating materials. All of the tested blends showed a good resistance against grease in the coating trials, having grease resistance from 60 to 69 days despite a very thin (～2 µm) coating layer. In addition, cellulose/PE‐co‐AA coating showed improved water vapor and oxygen barrier properties when compared with neat dissolved cellulose‐coated paperboard. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40286.     

Removal of bis(2-ethylhexyl) phthalate at a sewage treatment plant

Bis(2-ethylhexyl) phthalate (DEHP) concentrations were measured at different stages in a full-scale sewage treatment plant (STP) and mass balances were calculated. The DEHP load to treatment process coming from the sewer system and the internal load comprising returned supernatants and filtrate from sludge treatment and excess secondary sludge were at the same level. The DEHP removal efficiency from the water phase at the STP was on average 94% of sewage DEHP, the main removal process being sorption to primary and secondary sludges. On average 29% of DEHP was calculated to be removed in the biological nitrifying-denitrifying activated sludge process, which was much less than expected from laboratory biodegradation studies described in literature. Monoethylhexyl phthalate, the primary biotransformation product of DEHP, was not detected at any treatment stage. Approximately 32% of DEHP in sewage was removed during anaerobic digestion of the sludge, while 32% remained in the digested and dewatered sludge.     

Anaerobic on-site treatment of black water and dairy parlour wastewater in UASB-septic tanks at low temperatures

Anaerobic on-site treatment of synthetic black water (BW) and dairy parlour wastewater (DPWW) was studied in two-phased upflow anaerobic sludge blanket (UASB)-septic tanks at low temperatures (10-20 degrees C). At all temperatures, total chemical oxygen demand (COD(t)) removal was above 90% with BW and above 80% with DPWW and removal of total suspended solids (TSS) above 90% with both wastewaters. Moreover, dissolved COD (COD(dis)) removal was approx. 70% with both wastewaters indicating good biological activity of the sludges. With BW, a single-phased reactor was found sufficient for good COD removals, while with DPWW, a two-phased process was required. Temperature optimum of reactor sludges was still 35 degrees C after long (398d) operation. Most of the nutrients from BW were removed with TSS, while with DPWW nutrient removal was low. In conclusion, UASB-septic tank was found feasible for (pre)treatment of BW and DPWW at low temperatures.     

Quantitative risk assessment on the dietary exposure of Finnish children and adults to nitrite

Nitrite intake from the consumption of cured meat and tap water was estimated for Finnish children of 1, 3 and 6 years as well as Finnish adults of 25–74 years. Nitrite content in the foods was measured by capillary electrophoresis, and was then used together with individual food consumption data from the FINDIET 2007 and DIPP studies in a stochastic exposure assessment by a Monte Carlo Risk Assessment (MCRA) program. Nitrite intake from additive sources and tap water was assessed, and more than every 10th child between the ages 3 and 6 years was estimated to have a nitrite intake exceeding the acceptable daily intake (ADI) of nitrite. The high exposure levels were caused by frequent consumption of large portions of sausages, up to 350 g day^–1 or 750 g in 3 days, among the children. Median nitrite intake from cured meat was 0.016, 0.040, 0.033 and 0.005 mg kg^–1 body weight day^–1 for children of 1, 3 and 6 years and adults, respectively. Bayesian estimation was employed to determine safe consumption levels of sausages and cold cuts for children, and these results gave rise to new national food consumption advice.     

Thermoset lactic acid‐based resin as a matrix for flax fibers

Thermoset composites were produced from flax fibers and a novel lactic acid (LA)‐based thermoset resin. This resin is based on methacrylated, star‐shaped oligomers of LA. The main purpose of this work was to evaluate whether this resin can be used to produce structural composites from flax fibers. Composites were prepared by spray impregnation followed by compression molding at elevated temperature. The tests showed that composites can be produced with as much as 70 wt% fiber. The composites were evaluated by tensile testing, flexural testing, charpy impact test, dynamic mechanical thermal analysis (DMTA), and low‐vacuum scanning electron microscopy. The ageing properties in high humid conditions were evaluated, the Young's modulus ranged from 3 GPa to 9 GPa in the best case. This work shows that structural composites can be produced from renewable material. It is clear from the results that these composites have properties that make them suitable for furniture, panels, or automotive parts. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Will New Antenna Materials Enable Single Path Multiple Access (SPMA)?

The aim of this paper is to introduce a novel frequency reuse concept especially for macro cellular networks to substantially increase the mobile network capacity, and simultaneously to avoid the implementation of low efficient small cells. Single path multiple access (SPMA) utilizes the characteristics of independent propagation paths for particular geographical location in the coverage area of mobile network. The proposed concept is based on the assumption that new approach will be adopted by the antenna manufacturers for producing advanced antennas by utilizing materials like metamaterials including carbon based nanotechnology, and graphene. In SPMA concept, communication between base station and mobile station happens through only single independent propagation path, and frequency resources can be reused in 5 m  \(\times \)  5 m areas or even more often in 1 m  \(\times \)  1 m areas, but limited by a base station/mobile station antenna requirement. Thus, the capacity of the network will be increased dramatically, and it can be managed in centralized manner at certain macro site locations. In already deployed cellular networks, these macro sites are mostly easily available, and that would help to implement SPMA to enhance the network capacity. Simulation results provided in this paper show the applicability of SPMA technique, by limiting the radiation of signal as single path propagation between base station and mobile station.     

Experimental Novel Silane System in Adhesion Promotion Between Dental Resin and Pretreated Titanium

Five silane blends were evaluated as experimental adhesion-promoter primers. First, five organosilane monomers (silicon esters), 3-acryloxypropyltrimethoxysilane, 3-methacryloxypropyltrimethoxysilane, 3-glycidoxypropyltrimethoxysilane, tetrakis-(2-ethyloxyethoxy)silane and bis-[3-(triethoxysilyl)propyl]tetrasulfide, were diluted to 1% (v/v) and blended with a non-functional cross-linking silane, 1,2-bis-(triethoxysilyl)ethane (1%), in 95% ethanol. After activation, each blend was applied to silica-coated Ti coupons. A resin based on bis-phenol-A-diglycidyldimethacrylate was then bonded and photo-polymerized as stubs to the pretreated Ti coupons. Half of the specimens were stored in dry conditions and half were artificially aged by thermo-cycling. The primers containing 3-acryloxypropyltrimethoxysilane and 3-methacryloxypropyltrimethoxysilane produced significantly higher shear bond strength values than the control silane, a standard pre-activated product used in clinical dentistry.