A multiwinding modeling method for high frequency transformers and inductors

This paper presents a method to obtain an electric model for transformers and inductors, including both frequency and geometry effects in the windings, which can be linked with existing core models. One-dimensional distributions for magnetic and electric fields are assumed, and from Maxwell's equations an equivalent electric circuit is easily obtained. This equivalent circuit has been included in analog simulators (Spice, AnalogWorkBench, Saber ...), and comparisons between measured and simulated results are shown, both in time domain and in AC sweep, which verify the model accuracy. The model described in this paper allows designers to deal with key issues in the design of high-frequency magnetic components (copper losses, leakage inductance, skin and proximity effects) by using analog simulators, which are usually more familiar to them than finite-element analysis tools.     

Nephelometric study of salivary protein–tannin aggregates

Grape seed procyanidins were fractionated through different degrees of polymerisation, and human saliva was purified and separated into two fractions: one was mostly α‐amylase and the other was essentially proline‐rich proteins (PRPs). The interaction of these proteins with the procyanidin compounds was assayed using nephelometry, and the influence of several factors was investigated, such as degree of polymerisation, pH and concentrations of both protein and tannin. The same experiments were performed with bovine serum albumin (BSA). The amount of insoluble aggregates, resulting from the formation of polyphenol–protein aggregates, increased quickly up to a maximum value which thereafter remained practically unchanged. pH was set at 5.0 for all further assays, since it was the nearest value to that encountered in human saliva (pH 5.6–7.9), where proteins were stable and had a maximum ability to bind and precipitate procyanidin oligomers. These proteins were shown to have a strong affinity for procyanidin oligomers and were unable to resolubilise the polyphenol–protein aggregates when present in excess. PRPs required a much lower content to bind all the tannins (400 µg of procyanidin oligomers) than BSA and especially α‐amylase (48, 60 and 132 µg respectively). The procyanidin's ability to bind PRPs, BSA and α‐amylase increased with its average molecular weight. This ability increased regularly for PRPs up to 4500 Da, whereas the ability to bind the globular proteins decreased beyond 3400 Da. © 2001 Society of Chemical Industry     

Fabry Disease and the Heart: A Comprehensive Review

Fabry disease (FD) is an X-linked lysosomal storage disorder caused by mutations of the GLA gene that result in a deficiency of the enzymatic activity of α-galactosidase A and consequent accumulation of glycosphingolipids in body fluids and lysosomes of the cells throughout the body. GB3 accumulation occurs in virtually all cardiac cells (cardiomyocytes, conduction system cells, fibroblasts, and endothelial and smooth muscle vascular cells), ultimately leading to ventricular hypertrophy and fibrosis, heart failure, valve disease, angina, dysrhythmias, cardiac conduction abnormalities, and sudden death. Despite available therapies and supportive treatment, cardiac involvement carries a major prognostic impact, representing the main cause of death in FD. In the last years, knowledge has substantially evolved on the pathophysiological mechanisms leading to cardiac damage, the natural history of cardiac manifestations, the late-onset phenotypes with predominant cardiac involvement, the early markers of cardiac damage, the role of multimodality cardiac imaging on the diagnosis, management and follow-up of Fabry patients, and the cardiac efficacy of available therapies. Herein, we provide a comprehensive and integrated review on the cardiac involvement of FD, at the pathophysiological, anatomopathological, laboratory, imaging, and clinical levels, as well as on the diagnosis and management of cardiac manifestations, their supportive treatment, and the cardiac efficacy of specific therapies, such as enzyme replacement therapy and migalastat.     

Glyoxal Ozonation Process in Aqueous Solution

The process of ozonation of glyoxal in aqueous solution has been studied by following its chemical and kinetic evolution. Results show that the oxidative process leads to formation of carboxylic functions and carbon dioxide according to a constant selectivity ratio at varying conversion degree.. Comparison between the oxygen amounts of reaction products and the corresponding ozone consumptions reveals that molecular oxygen takes part in the reaction process. System behavior is explained on the basis of radical reaction mechanism.     

Crystallization,morphology, structure and thermal behaviour of nylon-6/rubber blends

An experimental study was carried out in order to investigate the morphological, kinetic, structural and thermodynamic properties of nylon-6/rubber (namely ethylene-propylene copolymer (EPM) and ethylene-propylene copolymer functionalized by inserting along its backbone succinic anhydride groups (EPM-g-SA)) blends. The morphology and the overall kinetics of crystallization of the blends strongly depend on the type of copolymer added to nylon and on the blend composition. The EPM-g-SA acts as a nucleating agent for the Ny spherulites and at the same time causes a drastic depression of the overall kinetic rate constant. This decrease is related to the increase of the melt viscosity observed in Ny/EPM-g-SA blends. The crystalline lamella thickness of the Ny phase in the blends is lower than that of pure Ny crystallized at the same T_c suggesting that the presence in the melt of an elastomeric phase disturbs the growth of the Ny crystals. The rubber does not influence the thermal behaviour of the nylon. The results found lead to the conclusion that in the melt nylon-6 is incompatible with both EPM and EPM-g-SA copolymers.     

Model falsification using set‐valued observers for a class of discrete‐time dynamic systems: a coprime factorization approach

This article introduces a new method for model falsification using set‐valued observers, which can be applied to a class of discrete linear time‐invariant dynamic systems with time‐varying model uncertainties. In comparison with previous results, the main advantages of this approach are as follows: The computation of the convex hull of the set‐valued estimates of the state can be avoided under certain circumstances; to guarantee convergence of the set‐valued estimates of the state, the required number of previous steps is at most as large as the number of states of the nominal plant; and it provides a straightforward nonconservative method to falsify uncertain models of dynamic systems, including open‐loop unstable plants. The results obtained are illustrated in simulation, emphasizing the advantages and shortcomings of the suggested method. Copyright © 2013 John Wiley & Sons, Ltd.     

Bio-based sustainable films from the Algerian Opuntia ficus-indica cladodes powder: Effect of plasticizer content

The present study investigated the fabrication and characterization of bio-based sustainable films composed of a terrestrial plant raw material, namely Opuntia ficus-indica (OFI) cladodes powder (CP) and a marine seaweed derivative, namely agar (A). The effect of glycerol concentration on the properties of the casted films was evaluated at four different contents, namely 30, 40, 50 and 60 wt%. The films present UV-blocking properties, as well as moderate mechanical performance, thermal stability, and water vapor transmission rate (WVTR). The results point to an increase in thickness, elongation at break, moisture content, water solubility, and WVTR with increasing glycerol content. On the contrary, Young's modulus, tensile strength, and water contact angle decreased as glycerol concentration increased. The best combination is obtained for the film with 30% glycerol, based on an intermediate compromise between physical, mechanical, thermal, and barrier properties. All these outcomes express the potentiality of the powder obtained from grinding the OFI cladodes as raw material to produce low-cost films for the development of sustainable packaging materials.     

A linear algebra approach to OLAP

Inspired by the relational algebra of data processing, this paper addresses the foundations of data analytical processing from a linear algebra perspective. The paper investigates, in particular, how aggregation operations such as cross tabulations and data cubes essential to quantitative analysis of data can be expressed solely in terms of matrix multiplication, transposition and the Khatri–Rao variant of the Kronecker product. The approach offers a basis for deriving an algebraic theory of data consolidation, handling the quantitative as well as qualitative sides of data science in a natural, elegant and typed way. It also shows potential for parallel analytical processing, as the parallelization theory of such matrix operations is well acknowledged.     

A Closed-Loop Automatic Data-Mining Approach for Preventive Network Monitoring

As telecommunication networks grow in size and complexity, monitoring systems need to scale up accordingly. Alarm data generated in a large network are often highly correlated. These correlations can be explored to simplify the process of network fault management, by reducing the number of alarms presented to the network-monitoring operator. This makes it easier to react to network failures. But in some scenarios, it is highly desired to prevent the occurrence of these failures by predicting the occurrence of alarms before hand. This work investigates the usage of data mining methods to generate knowledge from historical alarm data, and using such knowledge to train a machine learning system, in order to predict the occurrence of the most relevant alarms in the network. The learning system was designed to be retrained periodically in order to keep an updated knowledge base.