Impact behavior of aminosilane functionalized nanosilica based shear thickening fluid impregnated Kevlar fabrics

In the present work, two types of shear thickening fluids have been synthesized by using neat and aminosilane functionalized silica nanoparticles and their viscosity curves have been obtained by the rheometer. Based on the values of peak viscosity of synthesized shear thickening fluids, the surface functionalized nanosilica based shear thickening fluid has been chosen as a best candidate due to the high viscosity for impregnation into the neat Kevlar of different layers viz. four (04) and eight (08) layers for velocity impact study. The experimental investigations reveal high energy absorption of shear thickening fluid impregnated Kevlar as compared to the neat Kevlar. The maximum energy absorption 62 J is achieved corresponding to the initial velocity 154 m∙s⁻¹ for 08 layers shear thickening fluid impregnated Kevlar specimen. The data have also been analytically determined and validated with the experimental data. The experimental data have good agreement with the analytical data within the accuracy of around 15 to 20%. The present findings can have significant inferences towards the fabrication of shear thickening fluids using nanomaterials for numerous applications such as soft armors, dampers, nanofinishing and so forth.     

A 223- $$\mu W$$ μ W single-to-differential RF mixer with 8.6dBm IIP3 using current-bleeding and body-effect for sub-6 GHz 5G applications

Analog Integrated Circuits and Signal Processing - As the 5G era beckons in the world of communication and information technology, there is a surge in demand for battery-operated, mobile wireless...     

Terrain-Specific: Contemporary Landscape Architecture in Canada

The Canadian landscape has typically captured a global imaginary of a pristine wild, but how might its urban designed landscapes be distinctly understood? Foregrounded by the landscape transformations accelerated by climate change, the book Innate Terrain: Canadian Landscape Architecture, edited by Professor Alissa North from the University of Toronto, highlights landscape architecture projects situated on the unique Canadian terrain. Providing further provocation on Canadian landscape architecture, Innate Terrain seeks to fill the literary gap on contemporary landscape perspectives, distinguishing Canadian landscape architecture from global practice, and particularly, its well-documented American counterpart. Landscape architecture in the Canadian context has evolved and established its own distinct identity, one imbued with national and local sensitivities. Informed by diverse environmental and cultural contexts, Canadian-designed landscapes reflect and refer to the prevailing ecosystems of Canada’s innate terrain. Contrary to the preceding International Style, landscape architecture projects in Canada have adopted the ethos of Critical Regionalism in the second half of the 20th century. Contemporary Canadian practitioners are designing landscapes that are deeply informed by their surrounding geographical context while emphasizing cultural specificity. Central to this cultural specificity, addressed by a new generation of landscape architects, is the increasing recognition of Indigenous Traditional Knowledge within the discipline. Canadian landscape architects have collaborated with First Nations, Inuit, and Métis communities, including the keepers of this knowledge, to develop land management strategies and design landscape interventions.     

A novel solution of deep learning for endoscopic ultrasound image segmentation: enhanced computer aided diagnosis of gastrointestinal stromal tumor

Multimedia Tools and Applications - Gastrointestinal stromal tumor is one of the critical tumors that doctors do not suggest to get frequent endoscopy, so there is a need for a diagnosis system...     

Impacts of slip and mass transpiration on Newtonian liquid flow over a porous stretching sheet

This article focuses on analytic solutions for Newtonian fluid flow with slip and mass transpiration on a porous stretching sheet using the differential transform method and Pade approximants of an exceptionally nonlinear differential equation. The impacts of different parameters including mass transpiration (suction/injection), Navier's slip, and Darcy number parameters on the velocity of the liquid and tangential stress are discussed. A comprehensive comparison of our results with the previous one in the literature is made, and the results showed good agreement. An investigation is conducted of a combination of magnetic liquids that are conceivably pertinent for wound medicines, skin repair, and astute coatings for natural gadgets. It is found that there is a decrease in the velocity profiles and the boundary layer thickness for the case of suction.     

Interfacial interactions and properties of cellular structured polyurethane nanocomposite based on carbonaceous nano-fillers

In this article, we have studied the effect of carbonaceous nanofillers viz. fullerenol (0D), carboxylated multi-wall carbon nanotube (MWCNT, 1D), hydroxylated graphene (2D) and combination of carboxylated CNT and hydroxylated graphene as 3D in thermoplastic polyurethane on the tensile properties of the fabricated cellular structures. The concentration of nano-fillers was varied as 0.1, 1, and 5 wt%. Tensile properties of the nanocomposite cellular structures were measured as per ASTM D882 at 20°C (below glass transition temperature, T_g) and 40°C (above T_g). The results have shown that the tensile strength was found to increase by 200%–300% and the tensile modulus was found to increase by 150%–300% for 2D and 3D nano-fillers while significantly poor results were observed for 0D. However, the test data tensile strength and modulus showed marginal increase at 20°C and marginally low at 40°C for 1D filler. The interfacial adhesion was calculated by using experimental tensile data and the predictive models. The interfacial adhesion parameter (B_σ) calculated using Pukanszky equation was found significantly higher value for 2D (B_σ20 = 195.8) and 3D (B_σ20 = 192.0) fillers while poor adhesion was observed for 0D (B_σ20 = −81.6) fillers. The developed cellular structured materials were also evaluated by attenuated total reflection Fourier transform IR spectra, differential scanning calorimetry, X-ray diffraction, scanning electron microscope, and transmission electron microscope.     

Firework inspired load balancing approach for wireless sensor networks

Wireless Networks - In Wireless Sensor Networks (WSNs), where power consumption is a huge concern, the improvement of the network’s lifetime is an area of constant study and innovation. The...     

Simultaneous bioelectricity generation and pollutants removal of sediment microbial fuel cell combined with submerged macrophyte

A submerged macrophyte sediment microbial fuel cell (SP-SMFC) was constructed in this study. Ceratophyllum demersum L., Vallisneria natans, Hydrilla verticillate were chosen as the submerged plants to form cer-SMFC, val-SMFC, hyd-SMFC systems. Plant groups showed the advantage of bioelectricity generation and pollutants removal compared with the unplanted system. The cer-SMFC group stood out with the maximum power density as 24.56 mW m^?2 and the average pollutants removal in overlying water (COD: 81.16%, TN: 65.27%, TP: 79.10%) and in sediments (TN: 26.40%, TP: 21.79%). The determination of root exudates and radial oxygen loss (ROL) demonstrated that C. demersum L. was superior to other studied submerged macrophytes. More root exudates may contribute to an increase in available substrates for electrochemically active bacteria and other microorganisms. Higher enzyme activities were obtained in three SP-SMFCs (especially in cer-SMFC). ATPase and APA activities in cer-SMFC group were increased by over 40% compared with the control. The results indicated that the presence of plants enhanced the microorganism activities, thereby improving bioelectricity generation and pollutants removal. This study will facilitate the application of SP-SMFC technology as an alternative for in situ remediation of polluted sediments.     

Teff (Eragrostis tef) processing,utilization and future opportunities: a review

The demand for food production has been constantly increasing due to rising population. In developed countries, for example, the emergence of regional production of old grains that are rarely utilized, along with the production of commonly consumed grains, has gained importance in recent years. These grains, known collectively as ancient or heirloom grains, have offered both farmers and consumers novel ways of cultivation and products with interesting taste, characteristics and nutritional value. Among the 30 000 plant species known, only five cereals currently provide more than 50% of the world's energy intake – bread wheat (Triticum aestivum), rice (Oryza sativa), sorghum (Sorghum bicolor), millets (Panicum sp.) and maize (Zea mays). The excessive utilization of these selected species has a great potential to cause genetic losses and difficulty in bridging future agricultural demands. Teff (Eragrostis tef), an ancient grain extensively cultivated in countries like Eritrea and Ethiopia, provides promising alternatives for new food uses since its nutritional value is significantly higher than most others cereal grains. The absence of gluten allows flexibility in food utilization since it can be directly substituted to gluten-containing products. The grain also offers an excellent balance of essential amino acids and minerals, which can fulfil the recommended daily intake and eliminates the need for fortification and enrichment. This review provides a general overview of the physical properties and nutritional composition of teff grains related to processing and applications in the food and feed industries. The current status of teff utilization, as well as the challenges in production and commercialization, and future opportunities is presented and discussed.     

Carbon supported nickel phosphide as efficient electrocatalyst for hydrogen and oxygen evolution reactions

Hydrogen production through water splitting is an efficient and green technology for fulfilling future energy demands. Carbon nanotubes (CNT) supported Ni₂P has been synthesized through a simpler hydrothermal method. Ni₂P/CNT has been employed as efficient electrocatalysts for hydrogen and oxygen evolution reactions in acidic and alkaline media respectively. The electrocatalyst has exhibited low overpotential of 137 and 360 mV for hydrogen and oxygen evolution reactions respectively at 10 mA cm^?2. Lower Tafel slopes, improved electrochemical active surface area, enhanced stability have also been observed. Advantages of carbon support in terms of activity and stability have been described by comparing with unsupported electrocatalyst.