The Simon effect occurs relative to the direction of an attention shift.

We investigated whether the Simon effect depends on the orienting of attention. In Experiment 1, participants were required to execute left-right discriminative responses to 2 patterns that were presented to the left or right of fixation. The 2 patterns were similar, and the discrimination was difficult. A letter at fixation signaled whether the current trial was a catch trial. The results showed a reversal of the Simon effect. That is, spatially noncorresponding responses were faster than spatially corresponding responses. In Experiment 2, the discrimination of the relevant stimulus attribute was easy. In Experiment 3, the discrimination of the relevant stimulus attribute was difficult, but the stimulus exposure time was long. In either experiment, the regular Simon effect was reinstated. In Experiment 4, the letter that signaled a catch trial appeared to the left or right of the imperative stimulus. The Simon effect occurred relative to the position of the letter. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Removal of fulvic acid from aqueous media by adsorption onto modified vermiculite

Clay minerals are low cost materials that can be structurally modified and exploited for removal of natural organic matter from freshwaters. The present study shows that vermiculites modified by ion exchange with hexadecyltrimethylammonium or intercalation with poly(hydroxy iron) cations are potential adsorbents for removal of fulvic acid, whereas the adsorption on the raw clay mineral is negligible. The efficiency of the modified vermiculite was evaluated by measuring adsorption isotherms by the batch technique using initial fulvic acid concentrations between 2.5 and 50.0 mg L^− 1, with one hour of contact time. At least 94% of the fulvic acid initially present in a 20 mg L^− 1 solution was sorbed onto either the intercalated poly(hydroxy iron) cations or the organically modified vermiculite. Up to an initial concentration of 5.0 mg L^− 1 the adsorption is irreversible, and no quantifiable fulvic acid was measured in the desorption experiments. For initial fulvic acid concentrations between 10.0 and 50.0 mg L^− 1, desorption was between 2.3% and 4.9% for Fe(III) intercalated vermiculite, and between 1.4% and 9.2% for the organoclay. The adsorption percentages on intercalated poly(hydroxy iron) cations increased upon lowering pH and increasing the ionic strength, indicating the occurrence of strong binding mechanisms such as ligand exchange. Adsorption percentage of fulvic acid onto the organoclay also increased with lowering of pH, but in this case the adsorption percentages showed a small decrease at high ionic strength, suggesting that electrostatic attraction plays an important role in the adsorption process.     

Enhancing thermal and dynamic-mechanical properties of epoxy reinforced by amino-functionalized microcrystalline cellulose

In this study, microcrystalline cellulose (MCC) was chemically modified with 3-(aminopropyl)triethoxysilane and added to epoxy to improve chemical, thermal and dynamic-mechanical characteristics of the composites. The composites were manufactured aided by sonication with 1.0%, 2.5%, or 5.0% wt/wt of untreated MCC or amino-functionalized MCC (MCC-Si). The epoxy/MCC-Si composites showed a decrease in the ─OH band by Fourier-transform infrared spectroscopy, and X-ray diffraction analysis indicated better dispersion. The incorporation of MCC-Si in epoxy resin decreased the heat of reaction, increased activation energy values (E_a) and pre-exponential factor (A), and did not affect thermal degradation. All conversion degree (α) versus temperature curves for the composites showed a sigmoidal shape. MCC-Si composites showed better dynamic-mechanical properties than the MCC counterparts, and the functionalization effect was evidenced in storage modulus (E') and loss modulus (E"). At 2.5% wt/wt of MCC-Si content an increase of 119% in E' at the glassy region, 127% in E' at the rubbery region and 173% in E" was observed compared to the neat resin, whereas the T_g barely changed among samples. Good adhesion between the amino-functionalized MCC and the epoxy matrix was observed at the fracture surface, evidencing that surface modification of MCC improves their chemical interaction.     

Aramid pulp treated with imidazolium ionic liquids as a filler in rigid polyurethane bio-foams

This article reports an aramid pulp (AP) treated with two ionic liquids (IL), namely 1-n-butyl-3-methylimidazolium chloride (C₄.Cl) and 1-carboxymethyl-3-methylimidazolium chloride (HO₂C), and its use as a filler in reinforced rigid polyurethane foams (RPUF). The RPUF were incorporated with the treated AP at three weight fractions (c.a. 0.1, 0.5, and 1.0 wt%) and were produced by the free rising method. The results showed that the studied IL promoted a better interaction between the AP and the RPUF system, which increased the overall reactivity, imparting a higher cell anisotropy. This also yielded a positive effect in mechanical properties and thermal stability of the RPUF. Compared to the neat RPUF, outstanding increases of approximately 50 and 20% were achieved in compressive modulus and strength, respectively. In all, the use of IL promoted increased compatibility between matrix and reinforcement, especially that HO₂C IL.     

Optimizing one-shot learning with binary synapses

A network of excitatory synapses trained with a conservative version of Hebbian learning is used as a model for recognizing the familiarity of thousands of once-seen stimuli from those never seen before. Such networks were initially proposed for modeling memory retrieval (selective delay activity). We show that the same framework allows the incorporation of both familiarity recognition and memory retrieval, and estimate the network's capacity. In the case of binary neurons, we extend the analysis of Amit and Fusi (1994) to obtain capacity limits based on computations of signal-to-noise ratio of the field difference between selective and non-selective neurons of learned signals. We show that with fast learning (potentiation probability approximately 1), the most recently learned patterns can be retrieved in working memory (selective delay activity). A much higher number of once-seen learned patterns elicit a realistic familiarity signal in the presence of an external field. With potentiation probability much less than 1 (slow learning), memory retrieval disappears, whereas familiarity recognition capacity is maintained at a similarly high level. This analysis is corroborated in simulations. For analog neurons, where such analysis is more difficult, we simplify the capacity analysis by studying the excess number of potentiated synapses above the steady-state distribution. In this framework, we derive the optimal constraint between potentiation and depression probabilities that maximizes the capacity.     

Comparing sensitivities of differently oriented multi-walled carbon nanotubes integrated on silicon wafer for electrochemical biosensors

In this study, we report on multi-walled carbon nanotubes fabricated on silicon substrate with four different orientations via chemical vapor deposition. It is well-known that chemical treatments improve the nanotube electrochemical reactivity by creating edge-like defects on their exposed sidewalls. Before use, we performed an acid treatment on carbon nanotubes. To prove the effect of the treatment on these nanostructured electrodes, contact angles were measured. Then, sensitivities and detection limits were evaluated performing cyclic voltammetry. Two target molecules were used: potassium ferricyanide, an inorganic electroactive molecule, and hydrogen peroxide that is a product of reactions catalyzed by many enzymes, such as oxidases and peroxidases. Carbon nanotubes with tilted tips become hydrophilic after the treatment showing a contact angle of 22° ± 2°. This kind of electrode has shown also the best electrochemical performance. Sensitivity and detection limit values are 110.0 ± 0.5 μA/(mM cm²) and 8 μM for potassium ferricyanide solutions and 16.4 ± 0.1 μA/(mM cm²) and 24 μM using hydrogen peroxide as target compound. Considering the results of wettability and voltammetric measurements, nanotubes with tilted tips-based electrodes are found to be the most promising for future biosensing applications.     

Convertibility of Function Points into COSMIC Function Points: A study using Piecewise Linear Regression

Background

COSMIC Function Points and traditional Function Points (i.e., IFPUG Function Points and more recent variation of Function Points, such as NESMA and FISMA) are probably the best known and most widely used Functional Size Measurement methods. The relationship between the two kinds of Function Points still needs to be investigated. If traditional Function Points could be accurately converted into COSMIC Function Points and vice versa, then, by measuring one kind of Function Points, one would be able to obtain the other kind of Function Points, and one might measure one or the other kind interchangeably. Several studies have been performed to evaluate whether a correlation or a conversion function between the two measures exists. Specifically, it has been suggested that the relationship between traditional Function Points and COSMIC Function Points may not be linear, i.e., the value of COSMIC Function Points seems to increase more than proportionally to an increase of traditional Function Points.

Objective

This paper aims at verifying this hypothesis using available datasets that collect both FP and CFP size measures.

Method

Rigorous statistical analysis techniques are used, specifically Piecewise Linear Regression, whose applicability conditions are systematically checked. The Piecewise Linear Regression curve is a series of interconnected segments. In this paper, we focused on Piecewise Linear Regression curves composed of two segments. We also used Linear and Parabolic Regressions, to check if and to what extent Piecewise Linear Regression may provide an advantage over other regression techniques. We used two categories of regression techniques: Ordinary Least Squares regression is based on the usual minimization of the sum of squares of the residuals, or, equivalently, on the minimization of the average squared residual; Least Median of Squares regression is a robust regression technique that is based on the minimization of the median squared residual. Using a robust regression technique helps filter out the excessive influence of outliers.

Results

It appears that the analysis of the relationship between traditional Function Points and COSMIC Function Points based on the aforementioned data analysis techniques yields valid significant models. However, different results for the various available datasets are achieved. In practice, we obtained statistically valid linear, piecewise linear, and non-linear conversion formulas for several datasets. In general, none of these is better than the others in a statistically significant manner.

Conclusions

Practitioners interested in the conversion of FP measures into CFP (or vice versa) cannot just pick a conversion model and be sure that it will yield the best results. All the regression models we tested provide good results with some datasets. In practice, all the models described in the paper - in particular, both linear and non-linear ones - should be evaluated in order to identify the ones that are best suited for the specific dataset at hand.     

Sentinel-1-based flood mapping: a fully automated processing chain

This article presents an automated Sentinel-1-based processing chain designed for flood detection and monitoring in near-real-time (NRT). Since no user intervention is required at any stage of the flood mapping procedure, the processing chain allows deriving time-critical disaster information in less than 45 min after a new data set is available on the Sentinel Data Hub of the European Space Agency (ESA). Due to the systematic acquisition strategy and high repetition rate of Sentinel-1, the processing chain can be set up as a web-based service that regularly informs users about the current flood conditions in a given area of interest. The thematic accuracy of the thematic processor has been assessed for two test sites of a flood situation at the border between Greece and Turkey with encouraging overall accuracies between 94.0% and 96.1% and Cohen’s kappa coefficients (κ) ranging from 0.879 to 0.910. The accuracy assessment, which was performed separately for the standard polarizations (VV/VH) of the interferometric wide swath (IW) mode of Sentinel-1, further indicates that under calm wind conditions, slightly higher thematic accuracies can be achieved by using VV instead of VH polarization data.