Mlcrolasers based on silica microspheres

Light can be confined efficiently in the high-Q, small-volume whispering-gallery-modes observed in silica microspheres. By coupling these microspheres to eroded optical fibers and fiber tips, direct mapping of the whispering-gallery modes has been achieved and the mode numbers have been assessed. The properties of these modes have allowed us to obtain laser action with very low thresholds in Nd-doped silica microspheres. Further projects in the field of non-linear optics and cavity quantum electrodynamics are described.     

Dielectric properties of polyarylate (PAr) around the glass transition

Dielectric characterization of the α-relaxation in polyarylate (PAr) has been carried out by means of a dielectric spectroscopy technique in a frequency range of 10–30 kHz. Complementary thermally stimulated depolarization currents (TSDC) and differential scanning calorimetry d.s.c.) measurements have also been performed. The results are interpreted in terms of the standard Cole-Cole plot and Havriliak-Negami distribution for the dielectric relaxation times. Information about the temperature and frequency dependence of a.c. conductivity is also obtained from the experimental curves. However, the behaviour of the main dielectric relaxation time is deduced from the experimental data in a wide range of temperature around the glass transition. This behaviour results in close agreement with the theoretical predictions of a free-volume approach for the dielectric α-relaxation recently proposed by the authors.     

Design and analysis of single-factor experiments: Analysis of variance of the effect of rice husk ash and commercial fillers in NR compounds

Summary White rice husk ash (WRHA) and black rice husk ash (BRHA) were incorporated into natural rubber (NR) using a laboratory-sized two-roll mill. A conventional vulcanization system was used for curing and physical tests of the NR vulcanized involved determining of tensile and tear resistances. For comparison purposes, precipitated silica (Zeosil-175) and carbon black (N774) were used too. Using the analysis of variance of single-factor experiments, it can be concluded that: BRHA is non-reinforcing filler and its use is limited to 20 phr; WRHA is semi-reinforcing filler and the variation of filler loading (0 up to 50 phr) causes the maximum variation upon tensile strength of NR compounds; and, that although carbon black and silica are reinforcing fillers, a real reinforcement is reached up to 20 phr for tensile strength.     

Enhancing decentralized service discovery in open service-oriented multi-agent systems

Service-oriented multi-agent systems are dynamic systems that are populated by heterogeneous agents. These agents model their functionality as services in order to allow heterogeneous agents or other entities to interact with each other in a standardized way. Furthermore, due to the large-scale and adaptative needs of the system, traditional directory facilitators or middle-agents are not suitable for the management of agent services. This article proposes the introduction of homophily in service-oriented multi-agent systems to create efficient decentralized and self-organized structures where agents have a greater probability of establishing links with similar agents than with dissimilar ones. This similarity is based on two social dimensions: the set of services that an agent provides and the organizational roles that it plays. A second contribution is an algorithm for service discovery that it is carried out taking into account the local information that is related to the homophily between agents. The experiments compare our proposal with other proposals in distributed environments. The results show that the proposed structure and algorithm offer desirable features for service discovery in decentralized environments. Specifically, these features provide short paths and a high success rate in the service discovery process and resilience under deliberate failures.     

Designing for video: investigating the contextual cues within viewing situations

The viewing of video increasingly occurs in a wide range of public and private environments via a range of static and mobile devices. The proliferation of content on demand and the diversity of the viewing situations means that delivery systems can play a key role in introducing audiences to contextually relevant content of interest whilst maximising the viewing experience for individual viewers. However, for video delivery systems to do this, they need to take into account the diversity of the situations where video is consumed, and the differing viewing experiences that users desire to create within them. This requires an ability to identify different contextual viewing situations as perceived by users. This paper presents the results from a detailed, multi-method, user-centred field study with 11 UK-based users of video-based content. Following a review of the literature (to identify viewing situations of interest on which to focus), data collection was conducted comprising observation, diaries, interviews and self-captured video. Insights were gained into whether and how users choose to engage with content in different public and private spaces. The results identified and validated a set of contextual cues that characterise distinctive viewing situations. Four archetypical viewing situations were identified: ‘quality time’, ‘opportunistic planning’, ‘sharing space but not content’ and ‘opportunistic self-indulgence’. These can be differentiated in terms of key contextual factors: solitary/shared experiences, public/private spaces and temporal characteristics. The presence of clear contextual cues provides the opportunity for video delivery systems to better tailor content and format to the viewing situation or additionally augment video services through social media in order to provide specific experiences sensitive to both temporal and physical contexts.     

Protecting biodegradable coatings releasing antimicrobial agents

This article describes the synthesis and in vitro analysis of poly(ester anhydride) antimicrobial protection coatings. Poly(ester anhydride)s composed of ricinoleic acid, sebacic acid, terephthalic acid, and isophthalic acid were used in this study. The polymers were compatible with various fillers commonly used in paint preparation. The in vitro experiments showed that the polymers are able to release diuron, an antimicrobial agent, for months. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Stationary policies for lower bounds on the minimum average cost of discrete‐time nonlinear control systems

The paper deals with the control problem of discrete‐time nonlinear systems. The main contribution of this note is to present conditions that assure the existence of stationary policies that generate lower bounds for the minimal long‐run average cost. These lower bounds coincide with the optimal solution when a mild convergence assumption holds. To illustrate the results, the paper presents an application for the simultaneous state‐feedback control problem, and the derived strategy is used to design a real‐time simultaneous control for two direct current motor devices. The dynamics of these two devices are written in terms of a nonlinear algebraic matrix recurrence, which in turn represents a particular case for our general nonlinear approach. The optimal gain for the corresponding simultaneous state‐feedback problem is obtained, and such a gain was implemented in a laboratory testbed to control simultaneously the two direct current motors. Copyright © 2013 John Wiley & Sons, Ltd.     

Rheological,thermal, and morphological properties of blends based on poly(propylene), ethylene propylene rubber,and ethylene-1-octene copolymer that could result from end of life vehicles: Effect of maleic anhydride grafted poly(propylene)

The objective of this work is to study the properties of blends that could result from the recycling of end-of-life vehicles (ELV). While ethylene propylene rubber (EPR) and ethylene propylene diene monomer (EPDM) have been used extensively as elastomeric additives in poly(propylene) (PP), they can be substituted by ethylene-1-octene copolymer (EOC). As a consequence, the matter resulting from the sorting of ELV might be more complex and made of PP, EPR, and EOC. The effect of incorporating EOC [that is a polyethylene elastomer (PEE)] and maleic anhydride grafted polypropylene (PP-g-MAH) on the rheological, thermal, and morphological properties of PP/EPR blends has been investigated. Blends of various compositions (with and without compatibilizer) were prepared using a corotating twin-screw extruder. The results were compared to the ones presented by a commercial (PP/EPR) blend. The EPR phase is dispersed in the form of spherical particles in (PP/EPR). The EOC phase is dispersed in the form of aggregated particles. Dynamic viscoelastic and differential scanning calorimetry properties of (PP/EPR)/EOC blends shows the incompatibility of the components even in presence of PP-g-MAH copolymer. POLYM. ENG. SCI., 47:1009–1015, 2007. © 2007 Society of Plastics Engineers     

3D MRI of explanted sheep hearts with submillimeter isotropic spatial resolution: comparison between diffusion tensor and structure tensor imaging

Magnetic Resonance Materials in Physics, Biology and Medicine - The aim of the study is to compare structure tensor imaging (STI) with diffusion tensor imaging (DTI) of the sheep heart...