Protein analysis of human von Ebner saliva and a method for its collection from the foliate papillae

The lingual serous glands of von Ebner are located close to the foliate and circumvallate papillae. Saliva secreted by these glands provides the immediate environment of the taste buds, and it has been hypothesized that it modulates taste perception. The purpose of this study was to develop a technique for collection of unstimulated and stimulated saliva from human von Ebner glands. Saliva was collected under resting conditions and after application of various gustatory stimuli (sweet, sour, salt, and bitter) by insertion of periostrips into the folds of the foliate papillae of healthy human volunteers. Stimulated saliva was also collected in glass microcapillaries or micropipettes. The flow-rates of unstimulated von Ebner saliva were 2.3 +/- 0.6 (S.E.) microL/min and 4.5 +/- 1.2 (S.E.) microL/min with 1% citric acid stimulation. The protein content was 2.5 +/- 0.5 (S.E.) mg/mL. The SDS gel electrophoretic profile of von Ebner saliva revealed two protein bands of Mr 18,000 that were identified on Western blots as von Ebner gland (VEG) proteins. Although lingual lipase activity was detected at very low levels by enzyme assay, this protein was not detected on Western blots. This collection technique should prove useful for analysis of specific functions associated with secretion from von Ebner glands.     

低速非线性渗流试井分析理论研究

低渗透油气藏存在不符合达西定律的渗流，从大量实验和产生低速非达西渗流的影响因素分析，低渗透油气藏确定存在启动压力。鉴于此，提出了准确描述含启动压力梯度非达西渗流的试井分析数学模型及模型的解，研究制作了非达西渗流的内、外边界条件下的典型样板曲线，该样板曲线对试井分析解释提供了可靠的帮助，为正确认识和研究低渗透油气藏的特殊规律提供了一个好的方法。     

The microstructure of Cu films deposited by the self-ion assisted technique

The microstructures of Cu films deposited by the self-ion assisted, partially ionized beam (PIB) deposition technique under two different accelerating potentials, 0 KeV and 6 KeV, are compared. The 6 KeV film shows a bimodal (111) fiber and (100) fiber texture with an abundance of twin boundaries and a relatively large average grain size with a typical lognormal distribution. The 0 KeV film consists of small, mostly (111) oriented grains with islands of abnormally large (100) grains. The controlling factors for the abnormal growth of the (100) grains are discussed in relation to the observed microstructures, showing that all factors necessary for abnormal (100) growth are present in the films.     

Equal-channel angular extrusion of beryllium

The equal-channel angular extrusion (ECAE) technique has been applied to a powder metallurgy (P/M) source Be alloy. Extrusions have been successfully completed on Ni-canned billets of Be at approximately 425°C. No cracking was observed in the billets, and significant grain refinement was achieved. In this article, microstructural features and dislocation structures are discussed for a singlepass extrusion, including evidence of <c> and <c+a> dislocations. Significant crystallographic texture developed during ECAE, which is discussed in terms of this unique deformation processing technique and the underlying physical processes which sustain the deformation. S.R. AGNEW, formerly with the Oak Ridge National Laboratory, Oak Ridge, TN 37831-6115 This article is based on a presentation made in the symposium entitled “Defect Properties and Mechanical Behavior of HCP Metals and Alloys” at the TMS Annual Meeting, February 11–15, 2001, in New Orleans, Louisiana, under the auspices of the following ASM committees: Materials Science Critical Technology Sector, Structural Materials Division, Electronic, Magnetic & Photonic Materials Division, Chemistry & Physics of Materials Committee, Joint Nuclear Materials Committee, and Titanium Committee.     

延迟破胶及强制裂缝闭合技术的研究及应用

采用延迟破胶技术,在压裂施工过程中加入不同浓度的胶囊破胶剂,利用它的延缓释放特性,使植物胶压裂液耐温、耐剪切稳定性增强,并且可以在不造成压裂液的流变性、滤失性和携砂性等过早丧失的前提下高浓度使用胶囊破胶剂。该技术与常规破胶技术相比,延缓释放率达50%,能更有效地清除液体残渣,减少压裂液对储层的伤害。同时由于有延缓破胶的特性,放喷采用相应的措施,可以降低支撑剂沉降速度,形成较好的沉砂剖面,提供高的裂缝导流能力,并且可以降低滤饼和压裂液残渣的伤害。     

Simultaneous sulfide and acetate oxidation under denitrifying conditions using an inverse fluidized bed reactor

BACKGROUND: Simultaneous removal of sulfur, nitrogen and carbon compounds from wastewaters is a commercially important biological process. The objective was to evaluate the influence of the CH₃COO^?/NO₃^? molar ratio on the sulfide oxidation process using an inverse fluidized bed reactor (IFBR). RESULTS: Three molar ratios of CH₃COO^?/NO₃^? (0.85, 0.72 and 0.62) with a constant S^2?/NO₃^? molar ratio of 0.13 were evaluated. At a CH₃COO^?/NO₃^? molar ratio of 0.85, the nitrate, acetate and sulfide removal efficiencies were approximately 100%. The N₂ yield (g N₂ g^?1 NO₃^?‐N consumed) was 0.81. Acetate was mineralized, resulting in a yield of 0.65 g inorganic‐C g^?1 CH₃COO^?‐C consumed. Sulfide was partially oxidized to S⁰, and 71% of the S^2? consumed was recovered as elemental sulfur by a settler installed in the IFBR. At a CH₃COO^?/NO₃^? molar ratio of 0.72, the efficiencies of nitrate, acetate and sulfide consumption were of 100%, with N₂ and inorganic‐C yields of 0.84 and 0.69, respectively. The sulfide was recovered as sulfate instead of S⁰, with a yield of 0.92 g SO₄^2?‐S g^?1 S^2? consumed. CONCLUSIONS: The CH₃COO^?/NO₃^? molar ratio was shown to be an important parameter that can be used to control the fate of sulfide oxidation to either S⁰ or sulfate. In this study, the potential of denitrification for the simultaneous removal of organic matter, sulfide and nitrate from wastewaters was demonstrated, obtaining CO₂, S⁰ and N₂ as the major end products. Copyright © 2008 Society of Chemical Industry     

Model Selection in Applied Science and Engineering: A Decision-Theoretic Approach

Mathematical models are developed and used to study the properties of complex systems in just about every area of applied science and engineering. Information on the system being modeled is, in general, incomplete, so that there may be two or more models consistent with the available information. The collection of these models is called the class of candidate models. A decision-theoretic method is developed for selecting the optimal member from the collection. The optimal model depends on the available information, the class of candidate models, and the model use. The candidate models may be deterministic or random. Classical methods for model selection, including the method of maximum likelihood and Bayesian methods, are briefly reviewed. These methods ignore model use and require data to be available. In addition, examples are used to show that classical methods for model selection can be unreliable in the sense that they can deliver unsatisfactory models when data is limited. The proposed decision-theoretic method for model selection does not have these limitations. The method accounts for model use via a utility function. This feature is especially important when modeling high-risk systems where the consequences of using an inappropriate model for the system can be disastrous.     

长25-29井卡钻事故的处理

长２５－２９井在完井阶段通井过程中发生粘附卡钻事故，在处理卡钻过程中又发生卡套铣筒、井漏、溢流等事故及复杂情况。通过对井下情况的认真分析，采取先堵漏后循环再解卡的处理方案，顺利地解除了该次卡钻事故，大大地减少了经济损失。     

f—x域内提高地震资料的信噪比

在 f-x 域,地震记录可以表示成有限个调频调幅正弦波的叠合,叠合的结果是一个连续且光滑的函数。我们可以用一个简单的 n 次多项式去逼近这个函数。本文提出了一种在 f-x 域用最小平方拟合原理消除随机噪声的新方法,并证明了在噪声为自噪以及空间采样足够密的条件下,拟合结果与噪声无关,即 f-x 域最小平方拟合处理可以有效地消除记录上的随机白噪,而对有效信号的破坏甚微。由于理论上允许振幅值及同相轴形态在空间上发生变化,因而该方法不具有混波作用,是高分辨率处理的理想工具。