On Surface Losses in Direct Metal Laser Sintering Printed Millimeter and Submillimeter Waveguides

Different lengths of WR3 (220–330 GHz) and WR10 (75–110 GHz) waveguides are fabricated through direct metal laser sintering (DMLS). The losses in these waveguides are measured and modelled using the Huray surface roughness model. The losses in WR3 are around 0.3 dB/mm and in WR10 0.05 dB/mm. The Huray equation model is accounting relatively good for the attenuation in the WR10 waveguide but deviates more in the WR3 waveguide. The model is compared to finite element simulations of the losses assuming an approximate surface structure similar to the resulting one from the DMLS process.     

Temperature of post‐flashover compartment fires—Calculations and validation

This paper describes and validates by comparisons with tests a one‐zone model for computing temperature of fully developed compartment fires. Like other similar models, the model is based on an analysis of the energy and mass balance assuming combustion being limited by the availability of oxygen, ie, a ventilation‐controlled compartment fire. However, the mathematical solution techniques in this model have been altered. To this end, a maximum fire temperature has been defined depending on combustion efficiency and opening heights only. This temperature together with well‐defined fire compartment parameters was then used as a fictitious thermal boundary condition of the surrounding structure. The temperature of that structure could then be calculated with various numerical and analytical methods as a matter of choice, and the fire temperature could be identified as a weighted average between the maximum fire temperature and the calculated surface temperature of the surrounding structure as a function of time. It is demonstrated that the model can be used to predict fire temperatures in compartments with boundaries of semi‐infinitely thick structures as well as with boundaries of insulated and noninsulated steel sheets where the entire heat capacity of the surrounding structure is assumed to be concentrated to the steel core. With these assumptions, fire temperatures could be calculated with spreadsheet calculation methods. For more advanced problems, a general finite element solid temperature calculation code was used to calculate the temperature in the boundary structure. With this code, it is possible to analyze surrounding structures of various kinds, for example, structures comprising several materials with properties varying with temperature as well as voids. The validation experiments were accurately defined and surveyed. In all the tests, a propane diffusion burner was used as the only fire source. Temperatures were measured with thermocouples and plate thermometers at several positions.     

Effect of filler on low temperature physical hardening of bitumen

Laboratory investigations of low temperature physical hardening of bitumen using a Bending Beam Rheometer (BBR) are described. The study encompasses five bitumens, three conditions with regard to additives and three testing temperatures (−15, −25 and −30°C). As additives, two fillers, hydrated lime and calcium carbonate, were used. The effect of the fillers on the isothermal low temperature hardening was evaluated with the aid of a physical hardening index. The viscoelastic nature of the bitumens and bitumen/filler mixtures was investigated utilising the Burger model, and the Burger parameters were used to calculate dissipation energy ratios (dissipated energy over stored energy) in each BBR test. The results obtained did not indicate any significant effect of the fillers on low temperature physical hardening. Analyses of the dissipation energy ratio showed a considerable capacity for energy dissipation, even at a temperature as low as −30°C. With few exceptions, more energy was dissipated than stored during a BBR test. It appears that the dissipation energy ratio is not necessarily related to the stiffness of the binder.     

Chemikalienfreie Bekämpfung von Holzschädlingen durch dielektrische Erwärmung mit Radiowellen und Mikrowellen

Thermal pest control requires long treatment times due to the low thermal conductivity of wood and may lead to the formation of cracks. Here, the thermal treatment with radio waves as well as microwaves has been studied. The direct dielectric heating has the advantage of a good homogeneity. The obtained temperature profiles for radio waves were more homogeneous compared to microwaves. Detailed studies showed that elimination of pests was not related to the application of the electromagnetic field itself, but due to the temperature increase.     

Synthetic Activity of Recombinant Whole Cell Biocatalysts Containing 2-Deoxy-D-ribose-5-phosphate Aldolase from Pectobacterium atrosepticum

In nature 2-deoxy-D-ribose-5-phosphate aldolase (DERA) catalyses the reversible formation of 2-deoxyribose 5-phosphate from D-glyceraldehyde 3-phosphate and acetaldehyde. In addition, this enzyme can use acetaldehyde as the sole substrate, resulting in a tandem aldol reaction, yielding 2,4,6-trideoxy-D-erythro-hexapyranose, which spontaneously cyclizes. This reaction is very useful for the synthesis of the side chain of statin-type drugs used to decrease cholesterol levels in blood. One of the main challenges in the use of DERA in industrial processes, where high substrate loads are needed to achieve the desired productivity, is its inactivation by high acetaldehyde concentration. In this work, the utility of different variants of Pectobacterium atrosepticum DERA (PaDERA) as whole cell biocatalysts to synthesize 2-deoxyribose 5-phosphate and 2,4,6-trideoxy-D-erythro-hexapyranose was analysed. Under optimized conditions, E. coli BL21 (PaDERA C-His AA C49M) whole cells yields 99 % of both products. Furthermore, this enzyme is able to tolerate 500 mM acetaldehyde in a whole-cell experiment which makes it suitable for industrial applications.     

Probabilistic movement models and zones of control

Machine Learning - Coordinated movements of players are key to success in team sports. However, traditional models for player movements are based on unrealistic assumptions and their analysis is...     

Adsorbent Regeneration by Non‐thermal Plasma for Elimination of Odorous Compounds from Indoor Air

The non‐thermal plasma (NTP) technique was shown to be a method to improve indoor air quality. In particular in kitchens, odorous emissions can be removed by NTP. A combined concept of adsorption of volatile organic compounds (VOCs) and plasma regeneration of the adsorber was tested in adsorption‐regeneration‐adsorption cycles. As reference VOCs, 2‐methylthiophene, 2‐methylpyrazine, 2‐acetylthiazole, nonanal, and trans‐2‐nonenal were selected in humid air streams. These odorous compounds are emitted during cooking and frying processes. The adsorption‐regeneration concept was also tested during a simulated frying process with garlic in rape oil. A hydrophobic zeolite was chosen as adsorber material and placed directly into the discharge zone of a plasma reactor.