Multislip and Soret–Dufour influence on nonlinear convection flow of MHD dissipative Casson fluid over a slendering stretching sheet with generalized heat flux phenomenon

In the present investigation, Soret–Dufour and multislip's impact on magnetohydrodynamics (MHD) Casson fluid flow encompassing variable thermophysical features in the nonlinear convection process is analyzed. It is believed that to any effective heat and mass transfer enhancement, the relaxation of such fluid and material time along with the thermo-physical features, are well estimated. In this model, a magnetic field of nonuniform strength is applied perpendicular to the slendering sheet with variable thickness, and nonlinear convection flow is considered in this generalized heat flux examination. An appropriate similarity variable is implemented on the governing equations embedding the variable viscosity, thermal conductivity, and generalized Fourier's law to drive ordinary differential equations. Galerkin weighted residual approach is utilized to calculate the flow field among other flow characteristics. The novel flow features are discussed therein. Modified Fourier and multislip's parameters are seen to have downsized the velocity and temperature field greatly. Thermal and solutal buoyancy effects are more pronounced in nonlinear form compared to the linear model. Dufour number influences both velocity and energy fields positively but negates the concentration field, while the Soret number gives an opposing characterization.     

Refractory Characteristics of Aluminum Dross-Kaolin Composite

The suitability of using aluminum dross waste and kaolin to produce refractory bricks is experimentally studied. Thirty brick samples of different blends are produced, dried at 30°C, dried further at 110°C, and fired at 1200°C. The firing temperature point, bulk density, apparent porosity, thermal conductivity, thermal shock, loss on ignition, permeability, shatter index, and shrinkage of the bricks blends are determined. The results show that some blend samples have good refractory characteristics with mixing ratio 4:1:2 (representing weight in grams of aluminum dross, plastic clay, and kaolin, respectively). The evaluations of studied properties reveal the possibility for aluminum dross waste to be used as matrix in refractory bricks.     

Oil composition,mineral nutrient and fatty acid distribution in the lipid classes of underutilized oils of Trilepisium madagascariense and Antiaris africana from Nigeria

Trilepisium madagascariense (TM) and Antiaris africana (AA) are two underutilized plants from Nigeria. They have been subjected to standard analytical techniques in order to evaluate the proximate composition, physico-chemical properties, mineral nutrient, fatty acid composition and distribution in the lipid classes of the seeds and seed oils. The carbohydrate composition of these seeds are high; TM is 62.73 ± 0.30% and AA is 53.97 ± 0.50%. Iodine value of TM was found to be 46.10 ± 0.70 mg iodine/g while that of AA was 88.24 ± 0.50 mg iodine/g. The mineral composition of the seeds and the oils varied with K having the highest concentration in the seed and Na the highest concentration in the oils. Linoleic acid is the dominant fatty acid in the oil of AA with the highest composition in the neutral lipids while palmitic acid is the dominant fatty acid in oil of TM. Vitamin E, Gamma-Sitosterol, α and β-Amyrin, Lupeol, Stigmast-4-en-3-one, and hydrocarbons were isolated from these oils. The results of the proximate, mineral nutrient compositions, chemical characterization and fatty acid distribution of these seeds and seed oils shows their possibility as potential resources.     

Characterization of an α‐amylase from sorghum (Sorghum bicolor) obtained under optimized conditions

Sorghum malt α‐amylase can compete with bacterial α‐amylase in industrial applications, if sufficiently stable and produced in a large enough quantity. Conditions for maximal α‐amylase production in sorghum malt and the physico‐chemical properties of the α‐amylase so produced are reported in this study. Sorghum grains were steeped in buffers with varying pH (4.0–8.0) for 24 h, at room temperature, and germinated for another 48 h to obtain the green malt. The buffer that induced the highest quantity of α‐amylase was chosen as the optimal pH and served as the medium for further steeping experiments conducted at different temperatures (10, 20, 30, 40, 50 and 60°C). The α‐amylase activity in the extract was determined in order to obtain the optimum temperature for α‐amylase induction at this particular pH. For the purpose of comparison, the α‐amylase produced at the optimum pH and temperature was purified to apparent homogeneity by a combination of ion‐exchange and size‐exclusion chromatography, and further characterized. Eight‐fold higher α‐amylase activity was induced in pH 6.5 buffer at 20°C compared with water, the traditional steeping medium. The K_m and V_max were estimated to be 1.092 ± 0.05 mg mL^?1 and 3516 ± 1.981 units min^?1, respectively. The activation energy of the purified amylase for starch hydrolysis was 6.2 kcal K^?1 mol^?1. Chlorides of calcium and manganese served as good activators, whereas CuSO₄ inhibited the enzyme with a 42% loss in activity at 312 mm salt concentration. Copyright © 2012 The Institute of Brewing & Distilling     

Application of the singularity function method to semi-infinite orthotropic rectangular plates on an elastic foundation

The singularity function method is applied to solve the structural problems of semi-infinite orthotropic rectangular plates on a Winker-type elastic foundation. Previous application by Selek et al. (Int. J. Mech. Sci., 25 (1983) 397) of the singularity function to plates on an elastic foundation was limited only to isotropic cases. Foundation-free orthotropic plate problems have been previously solved Adewale et al. (Int. J. Mech. Sci., 31 (1989) 853). In this paper, the singularity function method technique is extended to orthotropic rectangular plate on Winkler-type foundation. The isotropic rectangular plate results of Selek et al. (Int. J. Mech. Sci., 25 (1983) 397) and the foundation-free orthotropic rectangular plate results provided by Adewale et al. (Int. J. Mech. Sci., 31 (1989) 853) are recovered as special cases.     

Synthesis and characterization of polylactic acid-lecithin-starch bioplastic film

Plastic-induced environmental issues could be solved using biomaterials, such as polylactic acid (PLA) film. PLA film is a costly solution suggesting the need to add less expensive starch. However, PLA and starch do not mix due to their diverging water behavior. In this study, we evaluated the impact of lecithin as a compatibilizer in varying ratio of PLA and starch film. The results show that inclusion of lecithin in PLA/starch composite leads to enhanced mechanical properties compared with the composite without lecithin. All films' thermal properties were stable but the thermograph of PLA/starch display two peaks whose distance is impacted by lecithin. In addition, morphology and functional group fingerprints revealed that the addition of lecithin improved the interfacial adhesion between the two polymers. Lecithin influenced the positioning and dispersion pattern of starch granules and distinct transmittance characteristics. The improved compatibility of PLA/starch makes the resulting films less susceptible to water penetration and dissolution. This work demonstrated the possibility of using lecithin as emulsifier between PLA and starch which could expand the application of PLA/starch film especially in packaging industries and bale net wrapping.     

Effect of short-term storage on phenolic content,o-diphenolase and peroxidase activities of cut yam tubers (Dioscorea sp)

The effect of short-term storage on the protein, phosphorus and phenolic content as well as peroxidase and o-diphenolase activities of cut, harvested Jamaican yam (Dioscorea sp) tubers (D rotundata. D alata and D cayenensis) was studied. There was an initial increase in the total phenolic content up to the third week of storage followed by a gradual decrease to the sixth week. Phenolic content was found to be highest in D cayenensis followed by D rotundata and D alata. The activities of peroxidase (EC 1. 11. 1. 7) and o-diphenolase (EC 1. 10.3.1) increased steadily up to the third week of storage and thereafter decreased to the fifth week. The intensity and rapidity of browning in tubers when cut, correlated very closely with the tuber o-diphenolase and phenolic content levels while the onset of rotting correlated with the peroxidase activity levels in the species studied.     

Stress Corrosion Cracking of Cast 6063 and Deep Drawn 1017 Aluminum Utensils In Lycopersicum esculentum

In the black world cup-shaped utensils cast or deep drawn are usually used for cooking purpose. The utensils are made from deep drawn aluminum alloy of the 1xxx series and for cast 6xxx series. The cylindrical shape utensil is subjected to domestic heating cycles and after a while, tiny hole-like features termed pits will appear. This development will eventually shorten the service life of aluminum cooking utensils. This article examines the chemical response of deep drawn and cast utensils made from 1017 and 6063 aluminum alloys, respectively, in solution of Lycopersicum esculentum at a temperature other than ambient temperature. The results show that cast cylindrical utensils pit much more readily than deep drawn utensils. This occurrence is traceable to the presence of microcracks as a result of hydrogen embrittlement phase, precipitation of brittle second phase particles and the fine texture in cast utensils. The aluminum alloy can fail by cracking along grain boundaries when exposed to specific environments.     

Effect of low-zinc status and essential fatty acids deficiency on the activities of aspartate aminotransferase and alanine aminotransferase in liver and serum of albino rats

The effects of dietary deficiencies of zinc and essential fatty acids (EFAs) or both on aspartate aminotransferase (AST) and alanine aminotransferase (ALT) were investigated in young growing rats. Four groups of albino rats were fed diets deficient in either EFA (4% hydrogenated coconut oil) or zinc (6 ppm) or both. The control diet was adequate in EFA (4% soybean oil) and zinc (100 ppm). The feeding trial lasted eight weeks and the activities of AST and ALT were determined in the liver and serum. EFA deficiency had no significant (p > 0.05) effect on liver AST. However, zinc and the double deficiencies depressed AST activity in the organ. Deficiencies of EFA, zinc and their combination depressed ALT activity in the liver significantly (p < 0.05) with a concomitant increase recorded in the serum. The data suggested alteration in endothelial permeability of the plasma membrane and thus leakage of membrane constituents in the tissue studied. It is therefore considered that these deficient diets may affect liver tissue negatively in view of the role of these enzymes in amino acid metabolism.     

Titin N2A Domain and Its Interactions at the Sarcomere

Titin is a giant protein in the sarcomere that plays an essential role in muscle contraction with actin and myosin filaments. However, its utility goes beyond mechanical functions, extending to versatile and complex roles in sarcomere organization and maintenance, passive force, mechanosensing, and signaling. Titin’s multiple functions are in part attributed to its large size and modular structures that interact with a myriad of protein partners. Among titin’s domains, the N2A element is one of titin’s unique segments that contributes to titin’s functions in compliance, contraction, structural stability, and signaling via protein–protein interactions with actin filament, chaperones, stress-sensing proteins, and proteases. Considering the significance of N2A, this review highlights structural conformations of N2A, its predisposition for protein–protein interactions, and its multiple interacting protein partners that allow the modulation of titin’s biological effects. Lastly, the nature of N2A for interactions with chaperones and proteases is included, presenting it as an important node that impacts titin’s structural and functional integrity.