Design of agrivoltaic system to optimize land use for clean energy-food production: a socio-economic and environmental assessment

Clean Technologies and Environmental Policy - Accessing solar photovoltaic energy is a key point to develop sustainable energy and the economy of a developing country like India. The country has...     

Effect of the compatibilizer,on the engineering properties of TPV based on Hypalon® and PP prepared by dynamic vulcanization

Elastomeric Chlorosulfonated polyethylene (Hypalon^®) and thermoplastic Polypropylene (PP) based thermoplastic vulcanizates (TPVs) were prepared in presence of different doses of compatibilizer, maleic anhydride grafted PP (PP‐g‐MA) by employing dynamic vulcanization technique. The effect of incorporation in different proportions of compatibilizer on mechanical, spectral, morphological, thermal, and rheological properties of such TPVs was studied and the same were compared to that of virgin PP and amongst themselves. The mechanical analysis of the prepared TPVs exhibited significant improvements in stress at 25% modulus, ultimate tensile strength (UTS), and hardness values. FTIR studies revealed that a chemical interaction had taken place between Hypalon^® and functionalized compatibilizer during the process of dynamic vulcanization which led to an enhancement of interfacial adhesion between them. The two‐phase morphologies were clearly observed by scanning electron microscopic studies. The T_g values of Hypalon^® was modified in the TPVs as exhibited by differential scanning calorimetric studies. TGA studies indicated the increase in thermal stability of all TPVs with respect to the elastomeric Hypalon^®. Rheological properties showed that the compatibilizer reduces the melt viscosity of TPVs and thus facilitates the processibility of such TPVs. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40312.     

Aloe vera incorporated biomimetic nanofibrous scaffold: a regenerative approach for skin tissue engineering

Aloe vera (AV) is one of the medicinal herbs with a well-established spectrum of wound healing, antimicrobial and anti-inflammatory property. AV-mediated therapeutics present significant tissue regenerative activity by modulating the inflammatory and proliferative phases of wound healing. The purpose of the present work was to combine the biological properties of AV and the advantages of electrospun meshes to prepare a potent transdermal biomaterial. The polycaprolactone (PCL) containing 5 and 10 wt % of lyophilized powder of AV was studied for electrospinning into nanoscale fiber mats and compared with PCL/Collagen blend for dermal substitutes. SEM revealed the average diameters of PCL, PCL-AV 5 %, PCL-AV 10 % and PCL/Collagen nanofiber scaffolds in the range of 519 ± 28, 264 ± 46, 215 ± 63 and 249 ± 52 nm, respectively. PCL-AV 10 % nanofiber scaffolds showed finer fiber morphology with improved hydrophilic properties and higher tensile strength of 6.28 MPa with a Young’s modulus of 16.11 MPa desirable for skin tissue engineering. The nanofibers were then used to investigate differences in biological responses in terms of proliferation and cell morphology of mice dermal fibroblasts. It was found that PCL-AV 10 % nanofibrous matrix favored cell proliferation compared to other scaffolds which almost increased linearly by (p ≤ 0.01) 17.79 % and (p ≤ 0.01) 21.28 % compared to PCL on sixth and ninth day. CMFDA dye expression, secretion of collagen and F-actin expression were significantly increased in PCL-AV 10 % scaffolds compared to other nanofibrous scaffolds. The obtained results proved that the PCL-AV 10 % nanofibrous scaffold is a potential biomaterial for skin tissue regeneration.     

Performance Analysis of Gate-Stack Dual-Material DG MOSFET Using Work-Function Modulation Technique for Lower Technology Nodes

Silicon - Short channel effects (SCEs) along with mobility degradation has a great impact on CMOS technology below 100 nm. These effects can be overcome by using gate and channel...     

In vivo bioactivity of herbal‐drug‐incorporated nanofibrous matrixes

Aloe‐vera‐incorporated polycaprolactone nanofibrous matrixes were prepared by an electrospinning method. These developed matrixes were evaluated for their water absorption capacity, water vapor permeability, and contact angle, and, in an in vivo animal model, wound‐healing ability. The incorporation of the herbal drug made the matrixes hydrophilic with improved water retention and permeability properties. The in vivo studies were carried out in a rat model and showed improved results with respect to healing. Thus, this study confirmed that the developed matrixes could be used for wound‐healing applications. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42178.     

A study of external mass transfer effect on biodegradation of phenol using low‐density polyethylene immobilized Bacillus flexus GS1 IIT (BHU) in a packed bed bioreactor

The impact of external mass transport on the biodegradation rate of phenol in a packed bed bioreactor (PBBR) was studied. A potential bacterial species, Bacillus flexus GS1 IIT (BHU), was isolated from the petroleum‐contaminated soil. Low‐density polyethylene (LDPE) immobilized with the B. flexus GS1 IIT (BHU) was used as packing material in the PBBR. The PBBR was operated by varying the inlet feed flow rate from 4 to 10 mL/min, and the corresponding degradation rate coefficients were found to be in the range of 0.119–0.157 L/g h. In addition, the highest removal rate of phenol was obtained to be 1.305 mg/g h at an inlet feed rate of 10 mL/min. The external mass transfer was studied using the model . A new empirical correlation for the biodegradation of phenol in the PBBR was developed after the evaluation at various values of K and n.     

Energy and Network Balanced Distributed Clustering in Wireless Sensor Network

Wireless Personal Communications - Balancing energy consumption of sensor nodes to extend the network lifetime is a major concern for the energy constrained wireless sensor network. Improper load...     

Higher-order squeezing of the electromagnetic field in spontaneous and stimulated Raman processes

The occurrence of fourth and fifth-order squeezing in the fundamental mode of the electromagnetic field in spontaneous and stimulated Raman processes under the short-time approximation is investigated on the basis of a fully quantum-mechanical approach. In an idealized model, the Raman process is looked upon as a two-photon on a one phonon interaction process. The coupled Heisenberg equations of motion involving real and imaginary parts of the quadrature operators are established. The dependence of fourth- and fifth-order squeezing in terms of the signal-to-noise ratio on the number of photons is investigated. We have also established the amplitude squeezing effects in the Stokes and vibrational modes, which is found to be dependent on higher-order difference squeezing showing a difference squeezing that can be converted to normal squeezing.