Thermochemical stability of Fe- and co-functionalized perovskite-type SrTiO3 oxygen transport membrane materials in syngas conditions

The materials typically used for oxygen transport membranes, Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3?δ (BSCF) and La_0.6Sr_0.4Co_0.2Fe_0.8O₃ (LSCF) tend to decompose due to their low thermochemical stability under reducing atmosphere. Fe- and Co-doped SrTiO₃ (SrTi_1-x-yCo_xFe_yO_3-δ, x + y ≤ 0.35) (STCF) materials showing an oxygen transport comparable to LSCF have great potential for application in ion-transport-devices. In this study, the thermochemical stability of pure perovskite-structured STCF was investigated after annealing in a syngas atmosphere at 600–900 °C. The phase composition of the materials after annealing was characterized by means of X-ray diffraction (XRD). The thermodynamic activities of SrO, FeO, and CoO in the STCF materials were evaluated using Knudsen effusion mass spectrometry (KEMS). Co-doped SrTiO₃ (STC) materials were not stable after annealing in the syngas atmosphere above 5 mol% Co-substitution. Ruddlesden-Popper-like phases and SrCO₃ were detected after annealing at 600 °C. In contrast, Fe substitution (STF) showed good stability after annealing in syngas upto 35 mol% substitution.     

Forging furnace with thermochemical waste-heat recuperation by natural gas reforming: Fuel saving and heat balance

This paper considers thermochemical recuperation (TCR) of waste-heat using natural gas reforming by steam and combustion products. Combustion products contain steam (H₂O), carbon dioxide (CO₂), and ballast nitrogen (N₂). Because endothermic chemical reactions take place, methane steam-dry reforming creates new synthetic fuel that contains valuable combustion components: hydrogen (H₂), carbon monoxide (CO), and unreformed methane (CH₄). There are several advantages to performing TCR in the industrial furnaces: high energy efficiency, high regeneration rate (rate of waste-heat recovery), and low emission of greenhouse gases (CO₂, NO_x). As will be shown, the use of TCR is significantly increasing the efficiency of industrial furnaces – it has been observed that TCR is capable of reducing fuel consumption by nearly 25%. Additionally, increased energy efficiency has a beneficial effect on the environment as it leads to a reduction in greenhouse gas emissions.     

Cell Sheet Comprised of Mesenchymal Stromal Cells Overexpressing Stem Cell Factor Promotes Epicardium Activation and Heart Function Improvement in a Rat Model of Myocardium Infarction

Cell therapy of the post-infarcted myocardium is still far from clinical use. Poor survival of transplanted cells, insufficient regeneration, and replacement of the damaged tissue limit the potential of currently available cell-based techniques. In this study, we generated a multilayered construct from adipose-derived mesenchymal stromal cells (MSCs) modified to secrete stem cell factor, SCF. In a rat model of myocardium infarction, we show that transplantation of SCF producing cell sheet induced activation of the epicardium and promoted the accumulation of c-kit positive cells in ischemic muscle. Morphometry showed the reduction of infarct size (16%) and a left ventricle expansion index (0.12) in the treatment group compared to controls (24–28%; 0.17–0.32). The ratio of viable myocardium was more than 1.5-fold higher, reaching 49% compared to the control (28%) or unmodified cell sheet group (30%). Finally, by day 30 after myocardium infarction, SCF-producing cell sheet transplantation increased left ventricle ejection fraction from 37% in the control sham-operated group to 53%. Our results suggest that, combining the genetic modification of MSCs and their assembly into a multilayered construct, we can provide prolonged pleiotropic effects to the damaged heart, induce endogenous regenerative processes, and improve cardiac function.     

Self-Assembly of Proteinaceous Shells around Positively Charged Gold Nanomaterials Enhances Colloidal Stability in High-Ionic-Strength Buffers

The enzyme lumazine synthase (LS) has been engineered to self-assemble into hollow-shell structures that encapsulate unnatural cargo proteins through complementary electrostatic interactions. Herein, we show that a negatively supercharged LS variant can also form organic–inorganic hybrids with gold nanomaterials. Simple mixing of LS pentamers with positively charged gold nanocrystals in aqueous buffer spontaneously affords protein-shelled gold cores. The procedure works well with differently sized and shaped gold nanocrystals, and the resulting shelled complexes exhibit dramatically enhanced colloidal stability over a wide range of pH (4.0–10.0) and at high ionic strength (up to 1 m NaCl). They are even stable over days upon dilution in buffer. Self-assembly of engineered LS shells in this way offers an easy and attractive alternative to commonly used ligand-exchange methods for stabilizing inorganic nanomaterials.     

Development of Methods for Steel Surface Deformation Nanostructuring

Metal Science and Heat Treatment - Results are provided for studying deformation methods of steel surface nanostructuring and hardening with martensitic, pearlitic and austenitic structures. A new...     

Deformation-Induced Dissolution and Precipitation of Nitrides in Austenite and Ferrite of a High-Nitrogen Stainless Steel

Methods of Mössbauer spectroscopy and electron microscopy have been used to study the effect of the severe plastic deformation by high pressure torsion in Bridgman anvils on the dissolution and precipitation of chromium nitrides in the austenitic and ferritic structure of an Fe_71.2Cr_22.7Mn_1.3N_4.8 high-nitrogen steel. It has been found that an alternative process of dynamic aging with the formation of secondary nitrides affects the kinetics of the dissolution of chromium nitrides. The dynamic aging of ferrite is activated with an increase in the deformation temperature from 80 to 573 K.     

Active Metamaterials with Negative Static Electric Susceptibility

Although well-established textbook arguments suggest that static electric susceptibility χ⁽⁰⁾ must be positive in “all bodies,” it has been pointed out that materials that are not in thermodynamic equilibrium are not necessarily subject to this restriction. Media with inverted populations of atomic and molecular energy levels have been predicted theoretically to exhibit a χ⁽⁰⁾ < 0 state, however the systems envisioned require reduced temperature, reduced pressure, and an external pump laser to maintain the population inversion. Further, the existence of χ⁽⁰⁾ < 0 has never been confirmed experimentally. Here, a completely different approach is taken to the question of χ⁽⁰⁾ < 0 and a design concept to achieve “true” χ⁽⁰⁾ < 0 is proposed based on active metamaterials with internal power sources. Two active metamaterial structures are fabricated that, despite still having their power sources implemented externally for reasons of practical convenience, provide evidence in support of the general concept. Effective values are readily achieved at room temperature and pressure and are tunable throughout the range of stability −1 < χ⁽⁰⁾ < 0, resulting in experimentally-determined magnitudes that are over one thousand times greater than those predicted previously. Since χ⁽⁰⁾ < 0 is the missing electric analog of diamagnetism, this work opens the door to new technological capabilities such as stable electrostatic levitation.     

Studying the Sensitivity of Graphene for Biosensor Applications

Technical Physics Letters - We have studied the response of graphene-film-based chips on SiC substrates (the relative change in the chip resistance) to coming into contact with fluorescein...