Regulator problem for uncertain linear discrete-time systems with constrained control

A necessary and sufficient condition to test the robustness of a regulator of uncertain linear systems with constrained control is given. The candidate regulator for this test is that stabilizing nominal systems. An illustrative example is also given.     

Thermodynamic approach of inflation process of K‐BKZ polymer sheet with respect to thermoforming

The problem of modeling and the dynamic finite element simulation of thermoforming process for viscoelastic sheet are considered. The pressure load used in modeling is thus deduced from the thermodynamic law of ideal gases. The viscoelastic behavior of the K‐BKZ model is considered. The Lagrangian formulation together with the assumption of the membrane theory is used in the finite element implementation. The numerical validation is performed by comparing the theoretical solution for the uniaxial and equibiaxial hencky deformation with numerical results. Moreover, the influence of the K‐BKZ constitutive model, for three linear time distribution of airflow rate loading, on the thickness and on the stress distribution in thermoforming of containers made of HDPE are analyzed. POLYM. ENG. SCI., 45:1319–1335, 2005. © 2005 Society of Plastics Engineers     

Dark Current and Signal-to-Noise Ratio in BDJ Image Sensors

In this paper, analytical expressions of dark currents and equivalent noise generators of a CMOS color image sensor are presented, and the signal-to-noise ratio (SNR) at both outputs is evaluated. Static measurements and simulations on Austria Micro Systems 0.35-mum CMOS test structures yield guidelines to increase the SNR of the buried double junction photodetector     

Recruitment strategies in the women's health trial: feasibility study in minority populations. WHT:FSMP Investigators Group. Women's Health Trial:Feasibility Study in Minority Populations

The Women's Health Trial:Feasibility Study in Minority Populations (WHT:FSMP) examined the feasibility of recruiting postmenopausal women from a broad range of racial and socioeconomic backgrounds into a primary prevention trial requiring marked reductions in dietary fat. Postmenopausal women aged 50-79 yr who had no history of cardiovascular disease or cancer and who consumed 36% or more total energy from fat qualified to participate. We randomized the women into dietary intervention (60%) or control (40%) groups; we aimed to randomize 750 women in 18 months in each of the three clinical centers. All centers achieved goals for randomization based on ethnicity, and two centers exceeded overall recruitment goals. The greatest source of randomized participants was mass mailing, followed by items in the media, referrals, and community outreach. Recruitment yields were generally similar for the ethnic groups but lower for less-educated participants. The experience of WHT:FSMP indicates that postmenopausal women from the African-American, Hispanic, and non-Hispanic white communities can be recruited into dietary intervention studies for the prevention of disease.     

Converting Daily Rainfall Data to Sub-daily—Introducing the MIMD Method

One of the most important analysis in many hydrological and agricultural studies is to convert the daily rainfall data into sub-daily (hourly) because in many rainfall stations, only the daily rainfall data are available and for a comprehensive rainfall analysis, these data should be converted to sub-daily. Many experimental and analytical methods are available for this conversion but one of the simplest yet accurate ones has been proposed by the Indian Meteorological Department (IMD). Since the IMD method has shown low accuracy in some regions, in this study, the IMD method is modified to a single parameter equation, called Modified Indian Meteorological Department (MIMD) in order to improve the accuracy of the conversion. For this reason, the parameter is calibrated so that the maximum correlation between observed and estimated values is achieved. Five stations in different regions with different climatic conditions were selected so that the daily and sub-daily rainfall data were available in each of them. Then, the parameter of the MIMD method was derived for each station. The results were compared with both observed data and IMD method and it was shown that the mean correlation coefficient of MIMD and IMD methods were 0.9 and 0.73 respectively for 12-h rainfall depth which indicated that the accuracy of the MIMD method in estimation of sub-daily rainfall depths was significantly increased. Moreover, the results showed that the accuracy of the MIMD method decreases as rainfall duration decreases.

     

Calcium carbonate and ammonium polyphosphate flame retardant additives formulated to protect ethylene vinyl acetate copolymer against fire: Hydrated or carbonated calcium?

In this study, the effect of the chemical nature of different calcium (Ca)-based minerals as flame retardant additives in combination with ammonium polyphosphate (APP), in 1:1 proportions, on the flame retardancy behavior and performance of ethylene vinyl acetate copolymer was discussed. Combining APP with partly and completely hydrated calcium oxide led to superior flame-retardant function detected in mass loss calorimeter measurements with respect to the corresponding system containing carbonated calcium. This privileged character was attributed to the higher reactivity of hydrated Ca-based fillers toward APP in comparison with Ca carbonate, which induced the formation of an intumescent residue. The difference between reactivity potential of hydrated and dry Ca was demonstrated by the newly formed thermally stable species, and further evidenced by thermogravimetric analysis performed on APP/fillers blends. Moreover, the presence of more crystalline domains in the Ca/phosphorus-based compounds was evidenced by XRD analysis of the mass loss calorimeter test residues. The results of this work highlight the role of blend additive systems on the performance of flame retardancy of polymer materials.     

Studies on the pulping of egyptian cotton linters by the nitric acid process

Egyptian cotton linters were pulped by the nitric acid process. In order to reduce the high ash and silica contents of the resulting pulps it was found necessary to apply hot refining with sodium hydroxide solution. Different conditions of concentration, temperature, and pressure in the refining step were investigated. Refining before and during bleaching were compared.     

Effect of pH and zeta potential of Pickering stabilizing magnetite nanoparticles on the features of magnetized polystyrene microspheres

Styrene as a monomer was emulsified in water using several magnetite nanoparticles concentration and pH values. Emulsified styrene drops were used as templates for polymerization, in presence of water soluble free radical initiator, and formation of composite particles. Styrene template drops stabilization was verified by light as well as scanning electron microscopy imaging, which ensured the participation of the particles in building up a mechanical barrier to stop oil drops coalescence. Furthermore, the produced polystyrene composites were strongly attracted to an external magnet. The difference in particles size as a function of pH was elucidated using zeta potential measurements, which indicated dominance of pH on the hydrophilicity of the particles and consequently the extent of emulsification, which in turn affected the size of the obtained microspheres. Under some circumstances, capsules were formed instead of particles. Thereby, it can be concluded that the magnetic microspheres are optimally formed at pH 2.3 independently of the magnetite content used.     

Effect of bioactive dental adhesive on periodontal and endodontic pathogens

The objectives of this study were to: (1) develop a new bioactive dental bonding agent with nanoparticles of amorphous calcium phosphate and dimethylaminohexadecyl methacrylate for tooth root caries restorations and endodontic applications, and (2) investigate biofilm inhibition by the bioactive bonding agent against eight species of periodontal and endodontic pathogens for the first time. Bonding agent was formulated with 5?% of dimethylaminohexadecyl methacrylate. Nanoparticles of amorphous calcium phosphate at 30?wt% was mixed into adhesive. Eight species of biofilms were grown on resins: Porphyromonas gingivalis, Prevotella intermedia, Prevotella nigrescens, Aggregatibacter actinomycetemcomitans, Fusobacterium nucleatum, Parvimonas micra, Enterococcus faecalis, Enterococcus faecium. Colony-forming units, live/dead assay, biomass, metabolic activity and polysaccharide of biofilms were determined. The results showed that adding dimethylaminohexadecyl methacrylate and nanoparticles of amorphous calcium phosphate into bonding agent did not decrease dentin bond strength (P?>?0.1). Adding dimethylaminohexadecyl methacrylate reduced the colony-forming units of all eight species of biofilms by nearly three orders of magnitude. The killing efficacy of dimethylaminohexadecyl methacrylate resin was: P. gingivalis?>?A. actinomycetemcomitans?>?P. intermedia?>?P. nigrescens?>?F. nucleatum?>?P. micra?>?E. faecalis?>?E. faecium. Dimethylaminohexadecyl methacrylate resin had much less biomass, metabolic activity and polysaccharide of biofilms than those without dimethylaminohexadecyl methacrylate (P?<?0.05). In conclusion, a novel dental adhesive was developed for root caries and endodontic applications, showing potent inhibition of biofilms of eight species of periodontal and endodontic pathogens, and reducing colony-forming units by three orders of magnitude. The bioactive adhesive is promising for tooth root restorations to provide subgingival margins with anti-periodontal pathogen capabilities, and for endodontic sealer applications to combat endodontic biofilms.