Increasing Volumetric CO2 Uptake of Hypercrosslinked Polymers through Composite Formation

To overcome the drawbacks of solid microporous materials for CO₂ capture, this proof‐of‐concept study demonstrates a low‐cost and rapid method for producing composites consisting of hypercrosslinked polymers (HCP) with a polyethyleneimine (PEI) binder. The resulting materials capture CO₂ through physical and chemical absorption simultaneously. Compared with HCP, the composites exhibit higher CO₂ uptake, higher volumetric density, and improved tolerance to water which is attributed to the PEI binder.     

木材对均衡室内湿度的作用

木材表面可以使一天过程中室内湿度的波动减小,木镶板使室内湿度更长时间保持稳定,可减少人工通风的需求量,节约能源,提高空气质量. 室内湿度的短期波动来自于房间日常使用时产生的湿度,长期波动来自于降雨和季节变化带来的长期影响.对比房间表面覆盖着一种不吸收水汽的材料时,木质室内装饰材料对水分的吸收降低了湿度每日波动的峰值,提高了可感知的室内空气质量,从而降低对人工通风和能源的需求.     

Technical and economic analysis of solvent-based lithium-ion electrode drying with water and NMP

Processing lithium-ion battery (LIB) electrode dispersions with water as the solvent during primary drying offers many advantages over N-methylpyrrolidone (NMP). An in-depth analysis of the comparative drying costs of LIB electrodes is discussed for both NMP- and water-based dispersion processing in terms of battery pack $/kWh. Electrode coating manufacturing and capital equipment cost savings are compared for water vs. conventional NMP organic solvent processing. A major finding of this work is that the total electrode manufacturing costs, whether water- or NMP-based, contribute about 8–9% of the total pack cost. However, it was found that up to a 2?×?reduction in electrode processing (drying and solvent recovery) cost can be expected along with a $3–6?M savings in associated plant capital equipment (for a plant producing 100,000 10-kWh Plug-in Hybrid Electric Vehicle (PHEV) batteries) using water as the electrode solvent. This paper shows a different perspective in that the most important benefits of aqueous electrode processing actually revolve around capital equipment savings and environmental stewardship and not processing cost savings.     

Development of a simple microsystems membrane probe card

Presented here are details of the development of a novel membrane integrated circuit (IC) probe card structure based on microsystems technology. The device design allows probing of both solder bumps and pads. A self-limiting sensor was integrated to prolong device lifetime. Comparison with and discussion of the use of modelling is made. Possible enhancements to the probing structure are discussed to improve alignment and measurements. Also shown is data using our microsystems probe card to access a simple IC device. Our device has a contact resistance of less than 0.5 Ω for a force of 0.004 N. A method to implement our probing structure for commercial application and the potential developments which can be made to improve its ease of use are then discussed.     

Finite element analysis of electromagnetic scattering from a cavity

A finite element method (FEM) is implemented to compute the radar cross section of a two-dimensional (2D) cavity embedded in an infinite ground plane. The method is based on the variational formulation which uses the Fourier transform to couple the fields outside the cavity and those inside the cavity; hence, the scattering problem can be reduced to a bounded domain. The convergence of the discrete finite element problem is analyzed. Numerical results are presented and compared with those obtained by the standard finite element-Green function method and by the 2D integral equation method.     

8-epi PGF2 alpha generation during coronary reperfusion. A potential quantitative marker of oxidant stress in vivo

BACKGROUND: Myocardial reperfusion is believed to be associated with free radical injury. However, indexes of oxidative stress in vivo have been limited by their poor specificity and sensitivity. Isoprostanes are stable products of arachidonic acid formed in a nonenzymatic, free radical-catalyzed manner. We have developed a sensitive and specific assay for one of these compounds, 8-epi prostaglandin (PG) F2 alpha. METHODS AND RESULTS: To address its utility as an index of oxidative stress during coronary reperfusion, we measured urinary levels by gas chromatography/mass spectrometry in a canine model of coronary thrombolysis, in patients with acute myocardial infarction treated with thrombolytic therapy, and in patients after elective coronary artery bypass surgery. Urinary 8-epi PGF2 alpha was unchanged after circumflex artery occlusion in a canine model of coronary thrombolysis (n = 13; 437.2 +/- 56.4 versus 432.7 +/- 55.2 pmol/mmol creatinine) but increased significantly (P < .05) immediately after reperfusion (553.8 +/- 64.7 pmol/mmol). Urinary levels were increased (P < .001) in patients (n = 12) with acute myocardial infarction given lytic therapy (265.8 +/- 40.8 pmol/mmol) compared with age-matched control subjects (n = 20; 91.5 +/- 11.8 pmol/mmol) and patients with stable coronary disease (n = 20; 95.7 +/- 6.3 pmol/mmol). Preoperative levels rose from 113.2 +/- 11.8 to 248.2 +/- 86.3 pmol/mmol at 30 minutes into revascularization to 332.2 +/- 82.6 pmol/mmol by 15 minutes after global myocardial reperfusion (P < .05) and dropped to 181.2 +/- 50.4 pmol/mmol at 30 minutes and 120.2 +/- 9.9 pmol/mmol at 24 hours after bypass surgery (n = 5). Corresponding changes in spin adduct formation, found with electron paramagnetic resonance, were noted in 2 patients. CONCLUSIONS: These data support the hypothesis that free radical generation occurs during myocardial reperfusion. Measurement of isoprostane production may serve as a noninvasive index of oxidative stress.     

Ionic transport in amorphous anodic titania stabilised by incorporation of silicon species

Incorporation of silicon species from an alloy substrate into anodic titania is shown to stabilise the structure of the film, facilitating investigation of the ionic transport processes in amorphous titania grown at high efficiency. Thus, an amorphous anodic film developed on a sputtering-deposited Ti-6 at.%Si alloy formed to 100 V in phosphoric acid electrolyte in contrast to a partially crystalline film developed on relatively pure titanium at <20 V. Silicon species, which are immobile and act as marker species in the growing film, are present in the inner 58% of the film thickness. Evidently, the film material forms simultaneously at the film/electrolyte and alloy/film interfaces by co-operative transport of cations and anions, as is usual in amorphous anodic oxides. The phosphate anions incorporated from the electrolyte migrate inward at 0.34 times the rate of O²⁻ ions and hence are present in the outer 62% of the film thickness.     

An adaptive descent method for non-linear viscoplasticity

A forming model based on a viscoplastic flow formulation is derived which includes the effects of small elastic strains. A significant feature of the formulation is its reliance on the dominant inelastic material characteristics in the formation of the stiffness matrix for large strain problems. The resultant non-linear system of equations is solved by an adaptive descent method which combines the rapid convergence of Newton's method near the solution with the robustness of a method of successive approximations. The use of the adaptive descent method effectively extends the viscoplastic flow formulations into the nearly rate-insensitive range of behaviours exhibited, for example, by metals at low temperature, where slow convergence of the non-linear solution algorithm has traditionally hampered their use.     

Transmission electron microscopic analysis of kidney glomeruli obtained by fine-needle aspiration

Aspiration biopsy of tumors and transplanted organs is a popular atraumatic method for diagnosis and also for the management of patients. Apart from the cytological analyses, it is clear that large aggregates of cells are obtained and these may be examined by electron microscopy. A study was carried out with dogs to assess the yield of intact glomeruli and tubules, resulting from a standard fine-needle aspiration procedure. Employing a 20-gauge needle, yields of approximately ten intact glomeruli were obtained with a tissue processing protocol that utilized filtration through a nylon mesh and backwashing, to resuspend the trapped aggregates. Processing for electron microscopy was carried out in microcentrifuge tubes. The ultrastructural preservation was excellent and the extension of these studies to investigations of not only renal transplantation, but also for diagnosis in human renal diseases of a broad spectrum, is suggested.