On the impact of physical layer awareness on scheduling and resource allocation in broadband multicellular IEEE 802.16 systems [Radio Resource Management and Protocol Engineering for IEEE 802.16]

Multicellular networks based on the IEEE 802.16 standard appear to be very promising candidates to provide end users with broadband wireless access. However, they also pose interesting challenges in terms of radio resource management, where several design choices are not specified in the standard, intentionally left open to implementors. For this reason, we focus in this article on scheduling and resource allocation, and investigate how they could operate in a cross-layer fashion. In particular, we describe the principles of joint scheduling and resource allocation for IEEE 802.16 operating in AMC mode, and discuss the critical role played by physical layer considerations, especially intercell interference estimation and channel state awareness, in the obtained performance. This leads to identifying key open issues and possible general solutions     

A design methodology for networks of online modules and its application to the Levinson-Durbin algorithm

The use of online arithmetic was often proposed for hardware implementations of complex digital-signal processing (DSP) algorithms. However, several important issues in the design process of such algorithms using online arithmetic are rarely discussed in the literature. This paper presents these issues and provides a methodology to analyze the behavior of networks of online arithmetic modules performing serial computation over fixed-point numbers. The methodology is presented, applied in several examples, and finally used to design an efficient field programmable gate arrays implementation of the Levinson-Durbin algorithm in an application of the Yule-Walker power spectrum estimation. The methodology can be applied to other algorithms as well and it simplifies the task of designing and verifying a network of online modules. The experimental results show the advantages of online arithmetic in the design of complex DSP algorithms.     

Surface tension as a limiting factor for aerobic n-alkane biodegradation

A new mathematical model for n-alkane biodegradation in crude oil, heavy oil and paraffinic mixtures is described. The pattern of n-alkane degradation as a function of the inverse of hydrocarbon chain length reported in this paper can be considered as general behaviour for many aerobic n-alkane biodegradation processes. A new interpretation of n-alkane biodegradation as a function of surface tension, is given. A mathematical expression was obtained starting from the degradation values of n-alkane and relative surface tension, which is a parameter independent of fermentation conditions. An interesting parameter, b, was identified which represented the accelerating conversion factor for n-alkane biodegradation. The findings suggested that the n-alkane biodegradation. The findings suggested that he n-alkane biodegradation rate may be affected by the fermentation condition (agitation, aeration, etc.) and by the strain of microorganism, while the behaviour pattern of n-alkane degradation was essentially linked to the substrate characteristics (molecular structure, molecular weight and density).     

Occurrence patterns of alien freshwater turtles in a large urban pond ‘Archipelago’ (Rome,Italy): Suggesting hypotheses on root causes

The patterns of the occurrence and distribution of alien freshwater turtle species in an urban pond archipelago (Rome, Italy) were analysed, with the aim of exploring the role of a set of factors (type of ponds, landscape context, size area, distance from the nearest road) with a generalized linear model approach. A total of 311 ponds subdivided in three types (fountains, small basins, lakes) embedded in different landscape contexts (public parks, private parks, urban areas) at differing distances from the nearest road were sampled. Six non‐native freshwater turtle species in 31 sites were recorded (9.97%). Lakes exhibited the highest occurrence rates of alien freshwater turtles, compared to small basins and fountains. Freshwater turtle species in urbanized areas were only observed in parks (both public and private). In both the public and private parks, the lakes exhibited the highest percentage of occupied sites, with fountains being the lowest. A direct and significant relationship was observed between pond size and species richness. The distance from the nearest road did not appear to affect species richness. A first interpretation of the data from this study facilitated the postulation of two a posteriori hypotheses that should be tested, as follows: (i) the causal process of turtle release is random, and the rate of extinction (and recapture) is higher in smaller ponds, thus producing the observed pattern; and (ii) the turtle release is not random, and people actively select the ponds they consider more suitable for their pet animals. In this study, it appears the lakes were perceived by those who abandon their pets as the most ecologically suitable habitats among other pond types to accommodate the different species of turtles. Knowledge of people's attitudes in regard to releasing pet animals also might assist managers of public green spaces to develop strategies aimed to preserve local biodiversity, and to educate the public about the conservation issue represented by the alien species.     

Heat Induced Structure Modifications in Polymer‐Layered Silicate Nanocomposites

Summary: The success of the use of layered silicates in polymer nanocomposites, to improve physical and chemical properties is strictly related to a deeper knowledge of the mechanistic aspects on which the final features are grounded. This work shows the temperature induced structural rearrangements of nanocomposites based on poly[ethylene‐co‐(vinyl acetate)] (EVA) intercalated‐organomodified clay (at 3–30 wt.‐% silicate addition) which occur in the range between 75 and 350 °C. In situ high temperature X‐ray diffraction (HT‐XRD) studies have been performed under both nitrogen and air to monitor the modifications of the nanocomposite structure at increasing temperatures under inert/oxidative atmosphere. Heating between 75 and 225 °C, under nitrogen or air, causes the layered silicate to migrate towards the nanocomposite surface and to increase its interlayer distance. The degradation of both the clay organomodifier and the VA units of the EVA polymer seems to play a key role in driving the evolution of the silicate phase in the low temperature range. The structural modifications of the nanocomposites in the high temperature range (250–350 °C), depended on the atmosphere, either inert or oxidizing, in which the samples were heated. Heating under nitrogen led to deintercalation and thus a decrease of the silicate interlayer space, whereas exfoliation was the main process under air leading to an increase of the silicate interlayer space.

Heat induced structural modification of EVA‐clay nanocomposite under nitrogen and air.     

Experimental methods in chemical engineering: X‐ray photoelectron spectroscopy‐XPS

X‐ray photoelectron spectroscopy (XPS) is a quantitative surface analysis technique used to identify the elemental composition, empirical formula, chemical state, and electronic state of an element. The kinetic energy of the electrons escaping from the material surface irradiated by an x‐ray beam produces a spectrum. XPS identifies chemical species and quantifies their content and the interactions between surface species. It is minimally destructive and is sensitive to a depth between 1–10nm. The elemental sensitivity is in the order of 0.1 atomic %. It requires ultra high vacuum ( Pa) in the analysis chamber and measurement time varies from minutes to hours per sample depending on the analyte. XPS dates back 50 years ago. New spectrometers, detectors, and variable size photon beams, reduce analysis time and increase spatial resolution. An XPS bibliometric map of the 10 000 articles indexed by Web of Science^[1] identifies five research clusters: (i) nanoparticles, thin films, and surfaces; (ii) catalysis, oxidation, reduction, stability, and oxides; (iii) nanocomposites, graphene, graphite, and electro‐chemistry; (iv) photocatalysis, water, visible light, and ; and (v) adsorption, aqueous solutions, and waste water.     

Aromatization of [1-14C]heptane over “nonacidic” platinum-alumina catalyst

[1-¹⁴C]Heptane was aromatized under 5 atm pressure over a “nonacidic” 3% platinum on alumina catalyst maintained at 500 °C. The reactant was pumped in at a HLSV of 0.88, and the hydrogen-to-heptane mole ratio was 5.1. The samples of product were collected (one during the first 90 min and another during the next 90 min), the toluene was separated from the respective samples, and the radioactivity in each position of the toluene was determined by a degradation sequence. The distribution of radioactivity in sample 1 was as follows: in position 1–2.6%, 2–38.6%; 3–14.5%; 4–4.2%, and in the methyl group—40.1%. Approximately similar distribution of radioactivity was found in sample 2. 1,6-Ring closure is the most important pathway leading to the formation of toluene from [1-¹⁴C]heptane; lesser amounts of repetitive, 1,5-ring closure and hydrogenolysis, and bond shift reactions followed by 1,6-ring closure and dehydration can explain the distribution of radioactivity. The participation of 1,7-ring closure in the reaction is also indicated.