Experimental study on the hazards of the jet diffusion flame of liquefied dimethyl ether

Dimethyl ether (DME) has been considered as a substitute for diesel fuel because it has a low auto-ignition temperature and produces less NO_x, SO_x, and particulate matter. However, the introduction of DME vehicles needs widely available DME supply stations. Moreover, the preparation of safety regulations for DME supply stations is very important, and so safety data is needed. Therefore, the present paper reports the hazards of the DME jet diffusion flame, which is one of several hazardous properties of DME, by studying the results of leaking gas and liquid DME. DME jets were released horizontally from circular nozzles whose diameters were 0.2, 0.4, 0.8 and 2 mm, and the release pressure was varied from the saturated vapor pressure to 2 MPa. When gaseous DME was released at the saturated vapor pressure, the flame was blown out. However, when liquefied DME was released, the flame formed. We obtained the experimental equations for estimating the scale and thermal hazards of DME diffusion flames.     

Quantification of cerebral blood flow with 99mTc-ECD SPECT by a single arterial or venous blood sample

The purpose of the study is to develop a simple and less invasive method for quantifying regional cerebral blood flow (rCBF) using 99mTc-ECD and SPECT. By employing a microsphere model, a new method to measure rCBF was developed, which required a single arterial or venous sample instead of continuous withdrawal of arterial blood. Using a regression line, the integral of input function of arterial blood from 0 to 30 min was inferred by activity of arterial blood sampled at time t; A(t), by activity multiplied by its octanol extraction rate; AN(t), by activity of venous blood at time t; V(t), and by activity multiplied by its octanol extraction rate; VN(t). The optimum sampling time of arterial or venous blood was examined when mean % error for inference became minimum. Consequently, minimum error of AN(6 min) was 5.5%, A(3 min) was 8.9%, VN(6 min) was 5.9%, and V(20 min) was 10.0%. Quantitative measurement of rCBF using the value of VN(6 min) was performed on other 6 subjects with dementia etc. To validate the method, 133Xe inhalation SPECT studies were also performed on the same subjects. We found a good agreement between them (r = 0.851). The presented one-point sampling methods were simple and less invasive for quantifying rCBF.     

Analysis of image sticking on a real MVA Cell

Abstract— Image‐sticking phenomenon is one of the most important issues affecting LCDs, especially LCD TV. It is known that image sticking is caused by residual DC voltage. An analysis of the cause that induces image sticking on a real LCD cell is very difficult to perform and is rarely reported. In this paper, the impurities that cause boundary image sticking on a real MVA cell was analyzed by examining a cross section of a cell, the bulk LC layer, the vicinity of the LC layer, the LC layer/PI alignment film interface using microanalysis methods such as infrared micro‐spectroscopy (μ‐IR) and micro‐sampling mass spectrometry (μ‐MS). It is clarified that there is quite a bit of aromatic acid at the boundary of the image‐sticking area than in the normal area at the LC/PI alignment film interface on the color‐filter side, not the TFT side, and it is assumed that aromatic carboxylic acid, a negative charged material, is condensed at the LC/PI alignment film interface on the color filter side by an electrically driven DC component inducing an electric‐condenser residual DC voltage.     

Improved ADPCM voice signal transmission employing click-noisedetection scheme for TDMA-TDD personal communication systems

In personal communication systems, better voice quality and lower terminal price are essential requirements, and adaptive differential pulse-code modulation (ADPCM) codecs are one of the voice codec candidates that have good voice quality and reasonable cost. However, in slow fading environments, burst errors induce click noise in ADPCM voice signal transmission. This paper proposes a novel error-concealment scheme to improve the ADPCM voice signal transmission quality of time division multiple access time division duplex (TDMA-TDD) personal communication systems in slow fading environments. The proposed scheme employs an improved error-detection technique with PCM differential detection and overflow detection coupled with a cyclic redundancy check (CRC) code. To compensate for residual click noise, an expanded CRC error-detection signal is used. Erroneous PCM signals are adaptively suppressed according to the click-noise detection information. Hardware simulation results show that these techniques significantly improve ADPCM voice signal transmission quality by 0.5 points and 1.0 compared to that of the conventional ADPCM muting scheme and no processing, respectively, with the mean opinion scoring (MOS) test in the slow fading environments typical of personal communication systems     

Method for Calculation of Sky Light Luminance Aiming at an Interactive Architectural Design

Recently, computer graphics are frequently used for both architectural design and visual environmental assessment. Using computer graphics, designers can easily compare the effect of the natural light on their architectural designs under various conditions, such as different times of day, seasons, atmospheric conditions (clear or overcast sky) or building wall materials. In traditional methods of calculating the luminance due to sky light, however, all calculation must be performed from scratch if such conditions undergo change. Therefore, to compare the architectural designs under different conditions, a great deal of time has to be spent on generating the images. This paper proposes a new method of quickly generating images of an outdoor scene, taking into account glossy specular reflection, even if such conditions change. In this method, luminance due to sky light is expressed by a series of basis functions, and basis luminances corresponding to each basis function are precalculated and stored in a compressed form in the preprocess. Once the basis luminances are calculated, the luminance due to sky light can be quickly calculated by the weighted sum of the basis luminances. Several examples of an architectural design demonstrate the usefulness of the proposed method.     

Optimization of grating duty factor in gain-coupled DFB lasers withabsorptive grating-analysis and fabrication

Grating duty factor strongly affects the performance of gain-coupled (GC) distributed feedback (DFB) laser diodes with an absorptive grating. Through numerical analysis the authors have found an optimum value in the duty factor for their low threshold operation. The minimum threshold gain achievable at this optimum duty factor is found to be almost independent of the order of the grating. According to this prediction, the authors have fabricated GaAlAs/GaAs GC DFB lasers with a third-order absorptive grating where the grating duty factor has been made close to the theoretical optimum value. In 200-μm-long devices with both facets as-cleaved, low CW threshold current of 25 mA, external efficiency of 0.5 mW/mA, and SMSR as high as 45 dB have been obtained, which is qualitatively consistent with the analysis. High yield of single mode oscillation seems to be the result of the gain coupling     

A Quick Rendering Method Using Basis Functions for Interactive Lighting Design

When designing interior lighting effects, it is desirable to compare a variety of lighting designs involving different lighting devices and directions of light. It is, however, time-consuming to generate images with many different lighting parameters, taking interreflection into account, because all luminances must be calculated and recalculated. This makes it difficult to design lighting effects interactively. To address this problem, this paper proposes a method of quickly generating images of a given scene illustrating an interreflective environment illuminated by sources with arbitrary luminous intensity distributions. In the proposed method, the luminous intensity ditribution is expressed with basis functions. The proposed method uses a series of spherical harmonic functions as basis functions, and calculates in advance each intensity on surfaces lit by the light sources whose luminous intensity distribution are the same as the spherical harmonic functions. The proposed method makes it possible to generate images so quickly that we can change the luminous intensity distribution interactively. Combining the proposed method with an interactive walk-through that employs intensity mapping, an interactive system for lighting design is implemented. The usefulness of the proposed method is demonstrated by its application to interactive lighting design, where many images are generated by altering lighting devices and/or direction of light.     

Dopamine D3 receptor gene polymorphism and the psychiatric symptoms seen in first-break schizophrenic patients

Cycads, the most primitive of the living gymnosperms, have been used and continue to be used for food and medicinal purposes by many cultures, although toxins must be removed before ingestion. In our quest to identify tropical plants that contain inhibitors of the cytochrome P-450 aromatase and thus may be efficacious in treating estrogen-dependent tumors, we have screened extracts from 5 species of cycad folia encompassing 3 genera: Cycas cairnsiana F. Muell., Cycas revoluta Thunb., Cycas rumphii Miq., Dioon spinulosum Dyer and Encephalartos ferox Bertol. All extracts were found to contain inhibitors of the human enzyme.