Experimental Thermal Performance Characterization of Flat Grooved Heat Pipes

ABSTRACT

The thermal characterization of aluminum flat grooved heat pipes is performed experimentally for different groove dimensions. Three heat pipes with groove widths of 0.2?mm, 0.4?mm, and 1.5?mm are used in the experiments. The effect of the amount of the working fluid is extensively studied for each groove width. The results reveal that, although all three succeed in dissipating the heat input through the phase change of the working fluid by continuous evaporation and condensation, the effectiveness of the heat transfer increases with reduced groove width. Furthermore, it is observed that there exists an optimum operating point, where the temperature difference between the heating and cooling sections is at a minimum, and the magnitude of this temperature difference is a strong function of the groove width. To the best of the authors’ knowledge, the combined effects of groove dimensions and the amount of the working fluid, from fully flooded to dry, is reported for the first time for aluminum flat grooved heat pipes.     

Adoption of Technology-Mediated Distance Education: A longitudinal analysis

We investigated the factors that facilitated the fast adoption and utilization of Technology-Mediated Distance Education (TMDE) among higher education institutions. Our analysis was based on a rich data set on the utilization of TMDE between the 1997–1998 and 2000–2001 academic years. The analysis showed that size, public/private status, and location significantly predicted its actual adoption. Being in an urban location negatively affected enrollment in the courses at the undergraduate but not at the graduate level. While the intent to adopt TMDE correlated significantly with actual adoption, many schools that were not interested in TMDE in 1997–1998 adopted it by 2000–2001. Interestingly, late adopters utilized certain technologies as frequently as early adopters, such as synchronous Internet-based instruction and the use of CD-ROMs.     

Assessment of the energy and exergy utilization efficiencies in the Turkish agricultural sector

This study deals with evaluating the energy and exergy utilization efficiencies in the Turkish agricultural sector over a 12‐year period from 1990 to 2001. In the energy and exergy analyses, two main energy sources, namely fuels and electricity, are taken into consideration, while the sectoral energy and exergy efficiencies are compared for this period. These main energy sources include diesel for tractors and other vehicles, and electricity for pumps. Overall energy utilization efficiencies are obtained to vary between 29.1 and 41.1%, while overall exergy utilization efficiencies are found to range from 27.9 to 37.4% in the analysed years, respectively. It may be concluded that the present technique proposed here may be used as a useful tool in analysing and evaluating the energy and exergy utilization efficiencies, identifying energy efficiency and/or energy conservation opportunities and dictating the energy strategies of countries. Copyright © 2005 John Wiley & Sons, Ltd.     

Forecasting based on sectoral energy consumption of GHGs in Turkey and mitigation policies

Recently, global warming and its effects have become one of the most important themes in the world. Under the Kyoto Protocol, the EU has agreed to an 8% reduction in its greenhouse gas (GHG) emissions by 2008–2012. The GHG emissions (total GHG, CO₂, CO, SO₂, NO₂, E (emissions of non-methane volatile organic compounds)) covered by the Protocol are weighted by their global warming potentials (GWPs) and aggregated to give total emissions in CO₂ equivalents. The main subject in this study is to obtain equations by the artificial neural network (ANN) approach to predict the GHGs of Turkey using sectoral energy consumption. The equations obtained are used to determine the future level of the GHG and to take measures to control the share of sectors in total emission. According to ANN results, the maximum mean absolute percentage error (MAPE) was found as 0.147151, 0.066716, 0.181901, 0.105146, 0.124684, and 0.158157 for GHG, SO₂, NO₂, CO, E, and CO₂, respectively, for the training data with Levenberg–Marquardt (LM) algorithm by 8 neurons. R² values are obtained very close to 1. Also, this study proposes mitigation policies for GHGs.     

Modified-Levermore–Pomraning equation: Its derivation and its limitations

A transport equation for the mean flux in spatially random media is derived, and is referred to as Modified-Levermore–Pomraning equation (M-L–P). It differs from the conventional L–P equations in that |μ| in the latter is replaced by μ in M-L–P. It is shown that when scattering is present the L–P equations are always incorrect in the sense there is not any special situation in which they can lead to an exact result. In particular they always predict the relaxation lengths of the spatial modes incorrectly. On the other hand, the M-L–P equations are exact when the flux at the origin is deterministic, as in some special cases such as half-infinite medium, and infinite medium with a localized source at the origin, when the density of the medium is spatially random. However, the M-L–P equations become approximate when the medium is a finite slab because of the right boundary condition. But the relaxation rates of the spatial modes are always calculated exactly even in finite slab. The nature of approximation inherent in the M-L–P is elucidated by comparison with the exact “stochastic transition matrix formalism” developed earlier in two-stream transport.     

Micellar association in simultaneous presence of organic salts/additives

Viscosity measurements under Newtonian flow conditions had been performed on cetyltrimethylammonium bromide (CTAB) aqueous solutions in the combined presence of sodium salts of aromatic acids (sodium salicylate, NaSal; sodium benzoate, NaBen; sodium anthranilate, NaAn) and organic additives (1-hexanol, C₆OH; n-hexylamine, C₆NH₂) at 30°C. On addition of C₆OH or C₆NH₂, the viscosity of 25 mM CTAB solution remained nearly constant without salt as well as with a lower salt concentration. This is due to low CTAB concentration which is not sufficient to produce structural changes in this concentration range of salts. However, as the salt concentration was increased further, the effect of C₆OH/C₆NH₂ addition was different with different salts: The viscosity first increased; then a decrease was observed with the former while with C₆NH₂ a decrease followed by constancy appeared in plots of relative viscosities (η _r ) vs. organic additive concentrations. At further higher salt concentration, the magnitude of η _r was much higher. The viscosity increase is explained in terms of micellar growth and the decrease in terms of swollen micelle formation (due to interior solubilization of organic additive) or micellar disintegration (due to formation of water + additive pseudophase).     

面向政治领域的事理图谱构建

事理图谱是一种描述事件之间顺承、因果等关系的事理演化逻辑有向图,它蕴含了丰富的事件间关系,在各领域都具有重要的研究意义和应用价值。当前研究主要集中于公开域的事件抽取上,而在特定领域,如政治领域,因其事件类型和事件内容较为复杂,相关研究十分有限。该文旨在构建面向政治领域的事理图谱,针对政治事件抽取中存在的语料匮乏、标准缺失等问题,制定了一套面向政治领域的事件分类标准,构建了一套政治领域的事件语料库。同时,该文分别提出了一种融合注意力机制的字嵌入修正神经网络的Pipeline模型和一种基于BERT+BiLSTM的Joint模型进行事件触发词和论元抽取,并在该语料库上进行实验。实验结果表明,两种模型在事件触发词与论元抽取任务中,F₁指标较基线模型均有较大提升。     

全局优化的蝴蝶优化算法

针对基本蝴蝶优化算法中存在的易陷入局部最优值、收敛速度慢等问题,提出一种全局优化的蝴蝶算法,引入limit阈值来限定蝴蝶优化算法陷入局部最优解的次数,从而改变算法易陷入早熟的问题,结合单纯形策略优化迭代后期位置较差的蝴蝶使种群能够较快地找到全局最优解;将正弦余弦算法作为局部算子融入BOA中,改善迭代后期种群多样性下降的缺陷,加快算法跳出局部最优。在仿真模拟实验中与多个算法进行对比,结果表明改进算法的寻优性能更好。