An optimized skin texture model using gray-level co-occurrence matrix

Neural Computing and Applications - Texture analysis is devised to address the weakness of color-based image segmentation models by considering the statistical and spatial relations among the group...     

Microwave assisted sintering of CaCu3Ti4O12

CaCu₃Ti₄O₁₂ electroceramic was prepared by a microwave assisted solid-state reaction technique from CaCO₃, CuO and TiO₂ powders. Processing involved the preparation of raw material, mixing and milling, calcination, pellet forming and sintering processes. Conventional furnace and microwave assisted sintering processes were employed in order to improve phase structures, morphology and dielectric properties of CaCu₃Ti₄O₁₂ ceramics. Surface and fracture FESEM analysis showed that the microwave assisted sintered CaCu₃Ti₄O₁₂ produced better densification and more uniform grain size compared to the conventional sintered sample.     

Drying with Chemical Reaction in Cocoa Beans

Desirable flavor qualities of cocoa are dependent on how the cocoa beans are fermented, dried, and roasted. During fermentation and drying, polyphenols such as leucocyanidin and apecatechin are oxidized by polyphenols oxidase to form o-quinone, which later react nonenzymatically with a hydroquinone in a condensation reaction to form browning products and moisture. The objective of this article is to model the cocoa beans drying together with the browning reaction. A Luikov drying model for the moisture and a simple Fick's law diffusion model combined with first-order reactions for both the enzymatic oxidation and nonenzymatic condensation reactions were constructed. Both models were used to identify moisture diffusivity coefficient and total polyphenols diffusivity in cocoa beans from experimental drying and polyphenols degradation data and published kinetic data of the reactions. The theoretical drying model fitted the experimental cocoa bean drying curves with low mean square of residuals. The polyphenols diffusion and reaction model also fitted the experimental polyphenols degradation curves with minimum mean residual squares. The rate of polyphenols degradation in the cocoa beans increases at higher temperature and higher relative humidity. This is because the increasing reaction rate of polyphenols oxidation reaction as well as higher moisture diffusion at higher relative humidity and temperature. The effective moisture diffusivity in cocoa beans is estimated to be between 8.194 × 10^-9 and 8.542 × 10^-9 m²·s^-1, which is of the same order of magnitude as published data. The effective total polyphenols diffusivity is estimated to be between 8.333 × 10^-12 to 1.000 × 10^-11 m²·s^-1 with minimum mean residual squares. It is three orders of magnitude less than the estimated moisture diffusivity because of the larger polyphenols molecules. The estimated polyphenols diffusivity is very close to those published in the literature for sorption and ultrafiltration processes.     

Viscous dissipation and MHD hybrid nanofluid flow towards an exponentially stretching/shrinking surface

Neural Computing and Applications - The impact of viscous dissipation in hybrid nanofluid plays a prominent role in industrial applications, for instance, in polymer processing flows and...     

Eco‐friendly synthesis of silver nanoparticles and its larvicidal property against fourth instar larvae of Aedes aegypti

In this study, larvicidal activity of silver nanoparticles (AgNPs) synthesised using apple extract against fourth instar larvae of Aedes aegypti was determined. As a result, the AgNPs showed moderate larvicidal effects against Ae. aegypti larvae (LC₅₀  = 15.76 ppm and LC₉₀  = 27.7 ppm). In addition, comparison of larvicidal activity performance of AgNPs at high concentration prepared using two different methods showed that Ae. aegypti larvae was fully eliminated within the duration of 2.5 h. From X‐ray diffraction, the AgNP crystallites were found to exhibit face centred cubic structure. The average size of these AgNPs as estimated by particle size distribution was in the range of 50–120 nm. The absorption maxima of the synthesised Ag showed characteristic Ag surface plasmon resonance peak. This green synthesis provides an economic, eco‐friendly and clean synthesis route to Ag.Inspec keywords: silver, nanofabrication, X‐ray diffraction, zoology, particle size, nanoparticles, biomedical materials, nanomedicineOther keywords: time 2.5 h, size 50 nm to 120 nm, silver nanoparticle, larvicidal property, instar larvae, Aedes aegypti, larvicidal effect, larvicidal activity performance, X‐ray diffraction, nanoparticle particle size distribution, absorption maxima, silver surface plasmon resonance peak     

Adsorptive performance of penta-bismuth hepta-oxide nitrate, Bi?O?NO?, for removal of methyl orange dye

The adsorption of methyl orange dye from aqueous solution onto penta-bismuth hepta-oxide nitrate, Bi(5)O(7)NO(3), synthesized by precipitation method, was studied in a batch adsorption system. The effects of operation parameters such as adsorbent dose, initial dye concentration, pH and temperature were investigated. The adsorption equilibrium and mechanism of adsorption was evaluated by Langmuir and Freundlich isotherm and different kinetic models, respectively. The results indicate that adsorption is highly dependent on all operation parameters. At optimum conditions, the adsorption capacity was found to be 18.9 mg/g. The adsorption data fits well with the Langmuir isotherm model indicating monolayer coverage of adsorbate molecules on the surface of Bi(5)O(7)NO(3). The kinetic studies show that the adsorption process is a second-order kinetic reaction. Although intra-particle diffusion limits the rate of adsorption, the multi-linearity plot of intra-particle model shows the importance of both film and intra-particle diffusion as the rate-limiting steps of the dye removal. Thermodynamic parameters show that the adsorption process is endothermic, spontaneous and favourable at high temperature.     

Static and dynamic compressive properties of polypropylene/zinc oxide nanocomposites

The effect of strain rate is widely recognized as an essential factor that influences the mechanical properties of polymer matrix composites. Despite its importance, no previous work has been reported on the high‐strain rate behavior of polypropylene/zinc oxide nanocomposites. Based on this, static and dynamic compression properties of polypropylene/zinc oxide nanocomposites, with particle contents of 1%, 3%, and 5% by weight, were successfully studied at different strain rates (i.e., 0.01 s^?1, 0.1 s^?1, 650 s^?1, 900 s^?1, and 1100 s^?1) using a universal testing machine and a split Hopkinson pressure bar apparatus. For standardization, approximately 24 nm of zinc oxide nanoparticles were embedded into polypropylene matrix for each of the tested polypropylene/zinc oxide nanocomposites. Results show that the yield strength, the ultimate strength, and the stiffness properties, of polypropylene/zinc oxide nanocomposites, were greatly affected by both particle loading and applied strain rate. Furthermore, the rate sensitivity and the absorbed energy of all tested specimens showed a positive increment with increasing strain rate, whereas the thermal activation volume showed a contrary trend. In addition, the fractographic analysis and particle dispersion of all composite specimens were successfully obtained using a field emisission scanning electron microscopy. POLYM. ENG. SCI., 54:949–960, 2014. © 2013 Society of Plastics Engineers     

Effects of peroxide crosslinking on the mechanical and morphological properties of poly(ethylene‐co‐vinyl acetate)/zeolite composites

Uncrosslinked and chemically crosslinked ethylene‐vinyl acetate copolymers (EVAs) with 5–25 volume percentages of zeolite were prepared in a melt‐mixing process and then compression‐molded on a hot‐press machine according to standard test specifications. The mechanical properties measured by tensile test showed a reduction in tensile strength and elongation at break with increasing zeolite content. However, an increasing trend was observed for tensile modulus with addition of zeolite. Experimental results for ultimate stress were compared with those from Pukanszky equation. The experimental data showed a good fit to the Pukanszky model. The improvement in the interfacial interaction for crosslinked composites was also confirmed by this model. Morphological changes of EVA/zeolite composites were analyzed by scanning electron microscopy (SEM). The fractured surface of the composites indicated more complex morphology at higher zeolite loading. The influence of crosslinking induced by 2 wt% of dicumyl peroxide on the properties of EVA/zeolite composites was also investigated. The crosslinked composites showed better tensile properties than the uncrosslinked ones, a result which might be an indication of enhanced interaction between the EVA and zeolite. Density measurements, gel content determinations, and Fourier transform infrared analyses were also performed to evaluate the crosslink content of the composites. The changes in the properties of chemically crosslinked EVA/zeolite composites were observed. Meanwhile, SEM micrographs of the crosslinked EVA/zeolite composites showed better interfacial strength between zeolite and the EVA matrix as compared to that of the uncrosslinked composites. J. VINYL ADDIT. TECHNOL., 2012. © 2012 Society of Plastics Engineers     

A Short Review on Copper Calcium Titanate (CCTO) Electroceramic: Synthesis,Dielectric Properties,Film Deposition,and Sensing Application

Nano-Micro Letters - Electroceramic calcium copper titanates (CaCu3Ti4O12, CCTO), with high dielectric permittivities (ε) of approximately 105 and 104, respectively, for single crystal and...     

Low Temperature Hall Effect Investigation of Conducting Polymer-Carbon Nanotubes Composite Network

Polypyrrole (PPy) and polypyrrole-carboxylic functionalized multi wall carbon nanotube composites (PPy/f-MWCNT) were synthesized by in situ chemical oxidative polymerization of pyrrole on the carbon nanotubes (CNTs). The structure of the resulting complex nanotubes was characterized by transmission electron microscopy (TEM) and X-ray diffraction (XRD). The effects of f-MWCNT concentration on the electrical properties of the resulting composites were studied at temperatures between 100 K and 300 K. The Hall mobility and Hall coefficient of PPy and PPy/f-MWCNT composite samples with different concentrations of f-MWCNT were measured using the van der Pauw technique. The mobility decreased slightly with increasing temperature, while the conductivity was dominated by the gradually increasing carrier density.