Crosslinked acrylic pressure‐sensitive adhesives. II. Effect of humidity on the crosslinking reaction

The effect of humidity during storage on the crosslinking reactions of isocyanate groups was investigated with attenuated total reflectance Fourier transform infrared spectroscopy with pressure‐sensitive adhesives composed of poly[ethyl acrylate‐co‐(2‐ethylhexyl acrylate)‐co‐(2‐hydroxyethyl methacrylate)] as a base resin and polyisocyanate as a crosslinker. A peak‐resolving analysis of the amide II region revealed four bands. According to an analysis of the Fourier transform infrared spectra of the model compounds, these four bands were assigned to free urethane linkages, hydrogen‐bonded urethane linkages, free urea linkages, and hydrogen‐bonded urea linkages. As expected, storage under humid conditions led to the formation of free and hydrogen‐bonded urea linkages corresponding to the promotion of isocyanate consumption. Peak resolution of the amide II region was found to be a reasonable way of monitoring urethane and urea linkages during crosslinking reactions. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3039–3045, 2003     

Comparison of activities in selective catalytic reduction of NOx by C3H8 over Co/MFI, Fe/MFI, and H/MFI zeolite catalysts

The Co/MFI(SiO₂/Al₂O₃ = 30) were prepared by a precipitation method with NaOCl in alkali solutions exhibited high activities to N₂ at 250 °C for the selective catalytic reduction (SCR) of NO_x. These catalysts showed two UV–vis bands at 700 and 400 nm, indicating the presence of octahedral Co(III) as well as tetrahedral Co(II). The high SCR activity over such Co(III, II)/MFI(30) seems to come from Co(III)---O moieties. The Co(II)MFI(30) catalysts prepared from Co(II)Cl₂ exhibited low SCR activities due to the presence of tetrahedral Co(II) ions in MFI. Less CO formation occurred over Co/MFI catalysts. The Fe/MFI(30) catalyst exhibited high activity due to the presence of some Fe---O species in MFI but more amount of CO were produced during SCR. H/MFI(30) catalyst exhibited a good SCR activity. However, more amount of carbonaceous deposits were produced on it. The correlation between acid concentration and SCR activity was discussed over H/MFIs.     

Fabrication of a poly-Si thin-film transistor with storage capacitor

The fabrication process of a low-temperature poly-Si thin-film transistor (TFT) with a storage capacitor was studied. The atmospheric-pressure chemical-vapour deposited SiO₂ protected the buried indium tin oxide (ITO) from reduction by a pure H₂ plasma treatment that was essential for the effective improvement of the poly-Si TFT characteristics. Thus, a storage capacitor with an ITO (picture electrode)-SiO₂-ITO (buried common electrode) structure was successfully fabricated. The poly-Si TFT with a channel width/length W/L ratio of 5 drove a 3 pF storage capacitor in 2 μs, and it showed superior driverability for LCD use. The TFT also had good hold characteristics under illumination for the realization of grey-scale representation.     

InxGa1−xAs ohmic contacts to n-type GaAs with a tungsten nitride barrier

Significant reduction of the contact resistance of In_0.7Ga_0.3As/Ni/W contacts (which were previously developed by sputtering in our laboratory) was achieved by depositing a W₂N barrier layer between the Ni layer and W layer. The In_0.7Ga_0.3 As/Ni/W₂N/W contact prepared by the radio-frequency sputtering technique showed the lowest contact resistance of 0.2 Ωmm after annealing at 550°C for 10 s. This contact also provided a smooth surface, good reproducibility, and excellent thermal stability at 400°C. The polycrystalline W₂N layer was found to suppress the In diffusion to the contact surface, leading to improvement of the surface morphology and an increase in the total area of the In_xGa−As between metal and the GaAs substrate. These improvements are believed to reduce the contact resistance.     

Superconductivity in the tetragonal phase of La1.9Bi0.1CuO4+δ annealed under high oxygen pressure

We have investigated the relation between the crystal structure and superconductivity in La_1.9Bi_0.1CuO_4+δ , in which the phase separation observed in La₂CuO_4+δ is suppressed. A phase diagram in theT?δ plane is given for La_1.9Bi_0.1CuO_4+δ with excess oxygen. For very smallδ values, the crystal structure is orthorhombic, and an orthorhombic-tetragonal phase transition occurs markedly atδ ～ 0.03 in the measured temperature range between 13 and 293 K. Superconductivity is observed in the range of 0.04<δ<0.11. This is clear evidence thathigh-T _c superconductivity also appears in the tetragonal phase.     

P-MOSFET's with ultra-shallow solid-phase-diffused drain structureproduced by diffusion from BSG gate-sidewall

A p-MOSFET structure with solid-phase diffused drain (SPDD) is proposed for future 0.1-μm and sub-0.1-μm devices. Highly doped ultrashallow p⁺ source and drain junctions have been obtained by solid-phase diffusion from a highly doped borosilicate glass (BSG) sidewall. The resulting shallow, high-concentration drain profile significantly improves short channel effects without increasing parasitic resistance. At the same time, an in situ highly-boron-doped LPCVD polysilicon gate is introduced to prevent the transconductance degradation which arises in ultrasmall p-MOSFETs with lower process temperature as a result of depletion formation in the p⁺-polysilicon gate. Excellent electrical characteristics and good hot-carrier reliability are achieved     

Detection of hepatitis C virus RNA from the heart of patients with hypertrophic cardiomyopathy

We investigated hepatitis C virus (HCV) infection in 35 patients with hypertrophic cardiomyopathy and 40 patients with ischemic heart disease who were consecutively admitted to our hospital. Frequency of positive anti-HCV antibody was significantly higher in patients with hypertrophic cardiomyopathy (6 of 35 patients, 17.1%) than that in patients with ischemic heart disease (1 of 40 patients, 2.5%, p = 0.036). In three of these six patients with hypertrophic cardiomyopathy, HCV RNA was detected in myocardial tissue. In two of these three patients, HCV RNA was detected from biopsy and autopsy specimens of the ventricles, but not in the serum, suggesting that HCV may replicate in myocardial tissue and may be relevant to ventricular hypertrophy. Thus, HCV infection may play a role in the development of hypertrophic cardiomyopathy.     

Properties of thin TiN films deposited onto stainless steel by an in-line dry coating process

A new coil-coating pilot plant, capable of utilizing ion plating, sputtering and plasma-assisted chemical vapor deposition (PACVD) processes, independently or in series, was developed and optimum conditions for TiN, TiC, Al_xO_y, SiO_x and Cr coating were established. This paper is mostly concerned with the results of characterization (conducted in parallel by the authors′ two institutions) of TiN films deposited by ion plating or sputtering onto type-304 stainless steel strips. In particular, the dependence of the basic properties such as chemical composition, structure, adhesion, and color on the coating process are discussed with respect to anti-corrosion, anti-wear, and decorative applications. TiN coatings with a very attractive gold coloration were obtained; they performed well in wear testing, but did not show satisfactory corrosion resistance. However, it was found that the latter can be improved significantly by depositing a SiO_x, top layer by PACVD above the TiN coating. Thus the in-line dry coating processes are capable of producing highly functional steel surfaces with decorative color and high corrosion resistance.