New Paradigm in NKT Cell Antigens: MCS-0208 (2-(Hydroxymethyl)phenylthio-phytoceramide) – an Aryl-Phytoceramide Compound with a Single Hydroxyl Group Stimulates NKT Cells

Natural Killer T (NKT) cells play an important role in the immune response and can be activated by glycolipids presented by CD1d protein. We present MCS-0208, an unprecedented arylthioether-phytoceramide able to induce potent invariant NKT (iNKT) cell activation, notably when tested in human iNKT cells. This arylsphingolipid analog has a simple phenyl group containing a single hydroxyl substituent as a surrogate of the sugar ring. The phenylthioether structure contrasts with α-galactosylceramide ( 1 ), the prototypical glycolipid used to induce iNKT cell stimulation, where the galactose 2’-OH and 3’-OH substituents are accepted as the minimal footprint and considered critical for NKT T cell receptor (TCR) recognition. A computational study supports the recognition of aromatic compound by the CD1d and TCR proteins as radically new structures for NKT cell stimulation.     

Enriched multi-agent middleware for building rule-based distributed security solutions for IoT environments

The Journal of Supercomputing - The increasing number of connected devices and the complexity of Internet of Things (IoT) ecosystems are demanding new architectures for managing and securing these...     

Environmental impact estimation of ceramic lightweight aggregates production starting from residues

Within a circular economy approach, this study investigates the environmental impact of lightweight aggregates (LWAs) produced starting from different mixes of different clays with brewery sludge and cattle bone flour ash (CBA), used as poring and fertilizing agents, respectively. The environmental impact was evaluated by means of release tests, insulation capacity, carbon footprint (CFP), and particulate matter emission during pellet firing. Release tests representative of LWAs realistic application showed very high release of phosphate and satisfactory release of potassium. The thermal insulation of the LWAs was tested by thermal imaging camera and resulted highly variable depending on the composition, with the mix containing CBA performing best. This latter composition leads also to the smallest CO₂ equivalent emission, due to the calorific power of CBA, allowing lower consumption of fossil fuels during the LWA production. Finally, total particulate emissions during the thermal treatment resulted similar in terms of mass for all mixes, while differences in terms of particle morphology and composition occurred. Samples containing residue resulted with a quite good release behavior, CFP, and insulation properties, but higher emission of particles, particularly when glass is added.     

Current Status of Angiogenic Cell Therapy and Related Strategies Applied in Critical Limb Ischemia

Critical limb ischemia (CLI) constitutes the most severe form of peripheral arterial disease (PAD), it is characterized by progressive blockade of arterial vessels, commonly correlated to atherosclerosis. Currently, revascularization strategies (bypass grafting, angioplasty) remain the first option for CLI patients, although less than 45% of them are eligible for surgical intervention mainly due to associated comorbidities. Moreover, patients usually require amputation in the short-term. Angiogenic cell therapy has arisen as a promising alternative for these “no-option” patients, with many studies demonstrating the potential of stem cells to enhance revascularization by promoting vessel formation and blood flow recovery in ischemic tissues. Herein, we provide an overview of studies focused on the use of angiogenic cell therapies in CLI in the last years, from approaches testing different cell types in animal/pre-clinical models of CLI, to the clinical trials currently under evaluation. Furthermore, recent alternatives related to stem cell therapies such as the use of secretomes, exosomes, or even microRNA, will be also described.     

Coenzyme Q10: Novel Formulations and Medical Trends

The aim of this review is to shed light over the most recent advances in Coenzyme Q₁₀ (CoQ₁₀) applications as well as to provide detailed information about the functions of this versatile molecule, which have proven to be of great interest in the medical field. Traditionally, CoQ₁₀ clinical use was based on its antioxidant properties; however, a wide range of highly interesting alternative functions have recently been discovered. In this line, CoQ₁₀ has shown pain-alleviating properties in fibromyalgia patients, a membrane-stabilizing function, immune system enhancing ability, or a fundamental role for insulin sensitivity, apart from potentially beneficial properties for familial hypercholesterolemia patients. In brief, it shows a remarkable amount of functions in addition to those yet to be discovered. Despite its multiple therapeutic applications, CoQ₁₀ is not commonly prescribed as a drug because of its low oral bioavailability, which compromises its efficacy. Hence, several formulations have been developed to face such inconvenience. These were initially designed as lipid nanoparticles for CoQ₁₀ encapsulation and distribution through biological membranes and eventually evolved towards chemical modifications of the molecule to decrease its hydrophobicity. Some of the most promising formulations will also be discussed in this review.     

Exploring the recovery of fatigue damage in bituminous mixtures: the role of rest periods

Recovery capability of bituminous materials plays a significant role in the development of new technologies for extending the service life of asphalt pavements. This capability originates from various phenomena such as thixotropy, cooling, relaxation of hardening, or healing. However, their real effect on mechanical response is not clear. This article aims to investigate how rest periods (RPs) available between traffic loads can contribute to the damage recovery of bituminous materials. For this purpose, different types and durations of RPs were applied during the laboratory evaluation of fatigue resistance of these materials using the University of Granada Fatigue Asphalt Cracking Test method. The results indicate that the addition of RPs to the loading regime could lead to an extension in the fatigue life of bituminous materials. Additionally, an increase in the RP duration showed a positive impact on the resistance of the materials against cyclic loading. Nonetheless, these benefits are not only related to the recovery of lost properties during RPs, but also a growth in the amount of plastic deformations as a result of the applying RPs could delay the appearance of damages (i.e. cracking). Consequently, the bituminous material can tolerate a higher number of load cycles during fatigue test.     

A dimensional reduction approach to modulate the core ruminal microbiome associated with methane emissions via selective breeding

The rumen is a complex microbial system of substantial importance in terms of greenhouse gas emissions and feed efficiency. This study proposes combining metagenomic and host genomic data for selective breeding of the cow hologenome toward reduced methane emissions. We analyzed nanopore long reads from the rumen metagenome of 437 Holstein cows from 14 commercial herds in 4 northern regions in Spain. After filtering, data were treated as compositional. The large complexity of the rumen microbiota was aggregated, through principal component analysis (PCA), into few principal components (PC) that were used as proxies of the core metagenome. The PCA allowed us to condense the huge and fuzzy taxonomical and functional information from the metagenome into a few PC. Bivariate animal models were applied using these PC and methane production as phenotypes. The variability condensed in these PC is controlled by the cow genome, with heritability estimates for the first PC of ~0.30 at all taxonomic levels, with a large probability (>83%) of the posterior distribution being >0.20 and with the 95% highest posterior density interval (95%HPD) not containing zero. Most genetic correlation estimates between PC1 and methane were large (≥0.70), with most of the posterior distribution (>82%) being >0.50 and with its 95%HPD not containing zero. Enteric methane production was positively associated with relative abundance of eukaryotes (protozoa and fungi) through the first component of the PCA at phylum, class, order, family, and genus. Nanopore long reads allowed the characterization of the core rumen metagenome using whole-metagenome sequencing, and the purposed aggregated variables could be used in animal breeding programs to reduce methane emissions in future generations.     

Rheokinematics for product development—Formulation screening in rotational rheometers

Product formulations for industrial processes are typically developed at laboratory scale. However, the mixing conditions are not easily mimicked in the laboratory. A rotational device is proposed in this study as a fast laboratory-scale formulation development, which enables mimicking the mixing conditions in the industrial process. The geometrical configurations of the rotational device are from rheometry devices (plate-plate and cone-plate). The main advantages of this method are the small amounts of raw materials and shorter testing times. This methodology is applied to an industrial case study, the reaction injection molding (RIM) process. The mixing length scales evolution in the rotational rheometer were matched to those in RIM machines. The main novelty of this study is the introduction of a protocol that bridges the processing conditions at laboratory using small amounts of raw materials to high throughput continuous flow reactors.     

Influence of photovoltaic generation model and time resolution on the reliability evaluation of distribution systems

This paper aims to investigate the influence of photovoltaic (PV) generation on reliability evaluation of distribution systems. Two PV generation models are used to predict the output power injected into the grid, taking into account the main relevant environmental variables, the irradiance and ambient temperature. Issues that directly affect the output power, such as the spatial smoothing effect due to the plant size and the influence of the irradiance and temperature measurement interval are taken into consideration. Using measurement time series of irradiance and local temperature, the models are used to generate power series in 4‐minute and hourly resolutions. The generated power series are used in a reliability assessment model, with the objective of evaluating the impact of solar resource variability on the reliability indices of the system. Case studies on the IEEE RBTS‐Bus 2 and on the real distribution system of Fernando de Noronha in Brazil are presented and discussed, for power plants of different capacities, considering the effect of the PV generation models, the temporal resolution of the time series and the spatial smoothing of the power output fluctuations. The results show that the power time series in hourly resolution significantly underestimates the frequency of interruptions. For the real system, this index is underestimated at the system level (up to 43%) and at the load points (up to 72%). On the other hand, for the interruption duration index, the temporal aggregation results in a small underestimation (just 4%). The results also indicates that the smoothing effect is irrelevant for typical PV system sizes of distribution systems with discretization equal to or above 4 minutes.