Removal of nitrates from groundwater through the use of artificial wetlands

Intensive fertilizer use has led to nitrate contamination of groundwater in many areas. This article examines the possibility of removing nitrates through the construction of artificial wetlands. A pilot study conducted in Denmark has found that the method is effective and economical, at least for small waterworks, though further treatment is necessary before an acceptable microbiological water quality is attained.     

Abrasive wear of dental composite resins

Abrasive wear is a major problem in the application of dental composite resins. In this study the friction and wear behaviours of two types of dental composites: one containing relatively coarse filler particles and some microfillers (Estilux) and another containing only microfiller particles (Durafill), have been investigated by using a scratch testing machine. Experimental results show that the coefficients of friction in both composites are essentially constant for applied loads up to 20 N. The wear resistance of Durafill is better than Estilux. Under the same testing conditions, the size, shape and distribution of the filler particles are more important variables than applied load and sliding speed in controlling the wear mechanism. It is shown that for Estilux, plastic ploughing by the diamond indenter is the predominant mechanism. For Durafill, however, the formation and propagation of tensile cracks on the worn surface is the main wear mechanism. The effects of two different indenters, diamond and enamel, on the basic wear mechanisms are also discussed.     

Task versus relationship conflict, team performance, and team member satisfaction: A meta-analysis.

This study provides a meta-analysis of research on the associations between relationship conflict, task conflict, team performance, and team member satisfaction. Consistent with past theorizing, results revealed strong and negative correlations between relationship conflict, team performance, and team member satisfaction. In contrast to what has been suggested in both academic research and introductory textbooks, however, results also revealed strong and negative (instead of the predicted positive) correlations between task conflict, team performance, and team member satisfaction. As predicted, conflict had stronger negative relations with team performance in highly complex (decision making, project, mixed) than in less complex (production) tasks. Finally, task conflict was less negatively related to team performance when task conflict and relationship conflict were weakly, rather than strongly, correlated. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

In situ SEM studies on the effects of particulate reinforcement on fatigue crack growth mechanism of aluminium-based metal-matrix composite

The effects of particulate reinforcement on the fatigue behaviour and fatigue mechanisms of two 6061 aluminium-based metal-matrix composites (MMCs) in three different heattreatment conditions were studied in situ with a scanning electron microscope and compared to the unreinforced alloy in the as-received condition. It was observed that the fatigue properties of the MMCs were influenced by the ceramic particles in two ways: firstly the particles increased the fatigue stress intensity threshold mainly by crack-deflection and crack-closure mechanisms, and secondly, the particles raised the fatigue crack growth rates in the Paris region by providing an easy crack path. The effect of ageing was small on the fatigue stress intensity threshold of MMCs, but for the peak-aged MMCs the fatigue crack growth rates in the Paris region were faster. The mechanism of fatigue crack growth was largely associated with the matrix/particle interface and the linkage with subcracks initiated ahead of the main crack at high applied stress intensity factors.     

Micromechanical characterisation of fibre/matrix interfaces

Theoretical analyses for the single fibre pull-out and push-out models under monotonic loading are given which are based on a shear-lag analysis in a fracture mechanics approach considering non-constant friction at the debonded interface as a result of fibre Poisson contraction (or expansion). The solutions allow the determination of typical fibre/matrix interfacial properties such as the interfacial fracture toughness, G_ic, the coefficient of friction, μ, and the residual clamping stress, q₀. Under cyclic loading the interfacial properties are expected to degrade as a result of repetitive abrasion, and a power law function is assumed between μ and the number of elapsed cycles, N. However, G_ic is assumed to be unaffected and a fracture mechanics based debond criterion is derived for the relationship between the external applied stress, the debond length and the reduced friction coefficient for both fibre pull-out and fibre push-out. In addition, the relative displacements between the free fibre end and the matrix top are obtained for cyclic fatigue when the fibre is loaded and unloaded. A relationship obtained for the protrusion (or intrusion) length in fibre pull-out (or push-out) experiments allows the severity of the interface frictional degradation to be evaluated and characterised. Similarities and differences in the frictional degradation behaviour between fibre pull-out and push-out are also identified.     

An adaptive non‐conforming finite‐element method for Reissner–Mindlin plates

Adaptive algorithms are important tools for efficient finite‐element mesh design. In this paper, an error controlled adaptive mesh‐refining algorithm is proposed for a non‐conforming low‐order finite‐element method for the Reissner–Mindlin plate model. The algorithm is controlled by a reliable and efficient residual‐based a posteriori error estimate, which is robust with respect to the plate's thickness. Numerical evidence for this and the efficiency of the new algorithm is provided in the sense that non‐optimal convergence rates are optimally improved in our numerical experiments. Copyright © 2003 John Wiley & Sons, Ltd.     

On the Cutoff Wavelength of Rectangular-Shaped Microshield Line by Edge Element Method

In this paper, the cutoff characteristic of rectangular-shaped microshield transmission line has been analysed by edge element method. Dependence of cutoff wavelengths on the thickness of metallic signal strip, dielectric constant of dielectric substrate and the width of the rectangular-shaped ground conductor are presented in tabular form. Numerical results in this paper have important values in design of rectangular-shaped microshield lines in microwave and millimeter wave integrated circuits.     

Comparative study of self-assembling of multilayers using reactive sputter deposition and mass selective ion beam deposition

While experimenting with the growth of metal-containing amorphous carbon (a-c:Me) thin films using two different growth processes, self-assembled multilayered structures were observed. One of the processes is a reactive magnetron sputter deposition process. The other process is a mass selective ion beam deposition process. Despite of the differences in the growth method and the growth condition, self-assembled multilayered thin films, consisting of alternating dark layer and bright layer, were obtained in both processes. Based on the consideration of energy for atomic diffusion in the thin films, the growth mechanism is discussed.