Chromium evaporation and oxidation characteristics of alumina-forming austenitic stainless steels for balance of plant applications in solid oxide fuel cells

The chromium (Cr) evaporation behavior of several different types of iron (Fe)-based AFA alloys and benchmark Cr₂O₃-forming Fe-based 310 and Ni-based 625 alloys was investigated for 500 h exposures at 800 °C to 900 °C in air with 10% H₂O. The Cr evaporation rates from alumina-forming austenitic (AFA) alloys were ~5 to 35 times lower than that of the Cr₂O₃-forming alloys depending on alloy and temperature. The Cr evaporation behavior was correlated with extensive characterization of the chemistry and microstructure of the oxide scales, which also revealed a degree of quartz tube Si contamination during the test. Long-term oxidation kinetics were also assessed at 800 to 1000 °C for up to 10,000 h in air with 10% H₂O to provide further guidance for SOFC BOP component alloy selection.     

Novel Positive Allosteric Modulators of µ Opioid Receptor—Insight from In Silico and In Vivo Studies

Opioids are the drugs of choice in severe pain management. Unfortunately, their use involves serious, potentially lethal side effects. Therefore, efforts in opioid drug design turn toward safer and more effective mechanisms, including allosteric modulation. In this study, molecular dynamics simulations in silico and ‘writhing’ tests in vivo were used to characterize potential allosteric mechanism of two previously reported compounds. The results suggest that investigated compounds bind to μ opioid receptor in an allosteric site, augmenting action of morphine at subeffective doses, and exerting antinociceptive effect alone at higher doses. Detailed analysis of in silico calculations suggests that first of the compounds behaves more like allosteric agonist, while the second compound acts mainly as a positive allosteric modulator.     

Using hydroacoustics to relate fluctuations in fish abundance to river restoration efforts and environmental conditions in the Penobscot River,Maine

Quantifying change after large habitat restoration efforts is critical to assessing the effort's success. After river restoration activities, fish abundance is expected to increase and also fluctuates naturally by season and with environmental conditions. A side‐looking hydroacoustic system was used to estimate fish abundance in the Penobscot River, ME, from 2010 to 2016 during predam (2010–2013) and postdam (2014–2016) removal years during nonice periods. Automated data processing enabled continuous abundance estimates from fish tracks. A threefold increase in mean fish abundance was recorded after dam removal. A fourfold increase in median fish abundance occurred in the fall relative to spring and summer of the same year, regardless of dam presence. Interannual fish abundance in every season monitored increased at least twofold after dam removal. We related variability in fish abundance to tide, discharge, temperature, diurnal cycle, daylength, moon phase, and restoration activities (focusing on dam presence). Daylength corresponding to the fall and summer was the most important indicator for higher fish abundance. Fish abundance was generally greatest in the fall during outgoing tides at night, with lesser peaks occurring during the month of June at night. Before dam removal, fish abundance peaked when water temperature was less than 9.25°C, at night, during outgoing tides. After dam removal, fish abundance peaked when daylength was less than 11.3 hr, at night, during outgoing tides, when water temperature was above 4.56°C and no full moon was present. Peak fish abundance occurred during only 0.02–2.3% of the total time sampled. The threefold increase in fish abundance recorded after dam removal was observed despite yearly stocking efforts of adult alewife increasing 24% in postdam removal years. Finally, parallel studies of fish presence in the Penobscot River were used to compare the utility of this method as an indicator of fish abundance in response to dam removal.     

Characteristics of pigments,modification, and their functionalities

Novel treatments of pigments with inorganic materials have tremendous industrial and commercial prospects. Specific treatment of pigment has a marked effect on its behavior during application. The treatment allows a broad modification of the surface characteristics of pigment particles which leads to improved functionalities. Surface modification of pigments is achieved via coating, polymerization with modifying reagent, treatment with derivatives or polymers, which alter either the optical, conductivity or dispersibility during processing and application. These and many other distinguishing factors that affect the characteristics of pigments such as the class, crystal structure, particle morphology, particle size, hiding power, pigment volume concentration, surface character, and surface treatment have been reviewed. Various organic pigments such as those from fungus and bacteria, and the various families of pigment types such as metallic pigment, light interference, and diffractive pigments which presents decorative quality such as leafing, nonleafing, pearlscent, and Fabry‐Perot effects on substrates have also been reviewed in addition to those from inorganic sources with emphasis on the structure and physiochemical modifications using metal and nonmetal Ions.     

A Mechanism for Carbon Depletion at Bondline of High-Frequency Electric-Resistance-Welded X70 Pipeline Steel

Metallurgical and Materials Transactions A - The bondline of electric-resistance-welded (ERW) linepipe steel, often etched white (i.e., ferrite) in optical microscopy, is generally believed to be...     

Functional Chromatography Reveals Three Natural Products that Target the Same Protein with Distinct Mechanisms of Action

Access to lead compounds with defined molecular targets continues to be a barrier to the translation of natural product resources. As a solution, we developed a system that uses discrete, recombinant proteins as the vehicles for natural product isolation. Here, we describe the use of this functional chromatographic method to identify natural products that bind to the AAA+ chaperone, p97, a promising cancer target. Application of this method to a panel of fungal and plant extracts identified rheoemodin, 1‐hydroxydehydroherbarin, and phomapyrrolidone A as distinct p97 modulators. Excitingly, each of these molecules displayed a unique mechanism of p97 modulation. This discovery provides strong support for the application of functional chromatography to the discovery of protein modulators that would likely escape traditional high‐throughput or phenotypic screening platforms.     

Attitudes towards regionalism in a rapid growth suburb

A key issue confronting our newer suburbs is the stance they should take towards efforts at regional cooperation and coordination of major policy areas. This article analyzes the preferences on this issue held by residents in a rapid growth suburb in the St. Louis metropolitan area. Through factor analysis, four identifiable dimensions of regionalist preferences were obtained from questionnaire responses--administrative cooperation, land-use cooperation, mass transit cooperation, and regional basic services cooperation. Correlational analyses between these dimensions of regionalist preferences and selected community status characteristics, social situation characteristics, and local political participation status of respondents reveal no systematic covariation. Thus municipal policies which influence the population mix within a community with respect to the life situation characteristics measured in this study are not likely to be useful instruments for influencing the preferences, pro or con, of the community towards regionalist policies. Further, local political participants are found to be representative of the larger community's regionalist policy preferences.     

Membrane performance enhancer evaluations on pilot- and full-scale membrane bioreactors

Recently developed polymeric membrane performance enhancer product, MPE50, was tested in various pilot‐ and full‐scale membrane bioreactors (MBRs). The Initial MPE50 dosage was determined by visual jar tests and by using various bench‐top filtration tests. Different amounts of MPE50 were dosed, and the particle size and supernatant clarity of the mixed liquor were monitored visually. Bench‐top filtration tests were also conducted. A 50% higher MPE50 dosage is recommended to be added to the pilot/full‐scale bioreactors because, based on experience, some of the soluble microbial products in the mixed liquor do not completely react with polymer during the relatively short bench‐test mixing time interval. With the addition of 400 mg/L MPE50 to a pilot MBR, the design flow was increased twofold without any significant transmembrane pressure (TMP) increase for 1 day. The control TMP surged within a few hours without MPE50. Long‐term field trials in a full‐scale plant also showed a substantial flux increase. In addition to flux enhancement, MPE50 helped to remove foam from the bioreactors and improved plant aesthetics, safety and general operating performance.     

Review

THE EXPERIENCE OF NATURE: A PSYCHOLOGICAL PERSPECTIVE by Rachel Kaplan & Stephen Kaplan, Cambridge University Press, 1989, 337pp, £10.95 (p/b), 0-521-34939-7.

THE ECOLOGY OF URBAN HABITATS by 0. L. Gilbert, Chapman & Hall, London, 1989, 369pp, 0-412-28270-4, £35.00.

DIRECTORY FOR THE ENVIRONMENT: ORGANISATIONS IN BRITAIN AND IRELAND 1986-7, Michael J. C. Barker, ed., London: Routledge & Kegan Paul, 1986. Second edition, pp. xviii + 278, £18.99, PB, ISBN 0-7102-0961-4.

THE URBAN ENVIRONMENT: A SOURCEBOOK FOR THE 1990s, Gerald Dawe, ed., Birmingham: Centre for Urban Ecology, 1990, pp. 636, £55.00, PB, ISBN 0-907272-07-X.

PLANTS IN THE LANDSCAPE (2nd Edn.), by Philip L. Carpenter and Theodore D. Walker, W. H. Freeman, New York and Oxford, 1990, 401 pp., ISBN 0-7167-1808-1, £29.95 HB.

SPORTS GEOGRAPHY by John Bale, E. & F. N. Spon, 1989, 0-419-14390-4, £16.95 PB.

THE POLITICS OF PARK DESIGN: A HISTORY OF URBAN PARKS IN AMERICA by Galen Cranz, ISBN 0 262 53084 8, 347pp, London: M.I.T. Press, 1989, £11.25, P.B.     

Assessment of contaminant diffusivities in building materials from porosimetry tests

Recent studies have shown that surface and gaseous contaminant interactions may play an important role in indoor air quality. Modeling is an important tool to improve our knowledge about the phenomena involved and define appropriate ventilation strategies. However, data for sorption isotherms and diffusion in building materials remain woefully lacking. This paper deals with the latter point. It aims at investigating a methodology based on an analysis of the material porosity first and then the application of Carniglia's mathematical model to determine the effective diffusivity of gaseous species in building materials. This methodology, whose main principles are presented in the first part of the paper, was applied to seven commonly found materials. Mercury intrusion porosimetry (MIP) tests, and the calculations using Carniglia's model, reveal typical total porosities and tortuosity factors for these materials. The analysis of pore size distributions (PSDs) also draws one's attention to the possible differences in the pore structures that may exist between two samples of the same type of material and the differences in the effective diffusivities of contaminants that may result from them. The computed effective diffusivities were subsequently compared to data from experiments carried out in the frame of the EC project MATHIS. An agreement was obtained, thus validating Carniglia's methodology - a methodology that offers many practical advantages compared to diffusion-cell methods.