Femtosecond Ti: Sa ultra short-pulse laser irradiation effects on the properties and morphology of the zirconia surface after ageing

Femtosecond pulses from a Ti:Sapphire laser were used to irradiate specimens of yttria-stabilised (35% mol) tetragonal zirconia (Y-TZP) with the purpose of studying the effects of the irradiations on their surface properties and morphology after ageing. Zirconia disks were divided into eight groups (n = 32) according to their surface treatment and subsequent ageing: Control: no treatment; sandblasting: Al₂O₃ sandblasting 50 μm; and ultrashort laser pulses irradiation with 25 μJ pulses, considering two different scanning steps based on the width between two grooves. These groups were duplicated and submitted to ageing. The surfaces were analysed using scanning electron microscopy (SEM), and X-ray diffraction. A finite element analysis, a biaxial flexure test, as well as fractographic and Weibull analyses, were performed. The strengths of the disks were statistically different for the treatment factor, and the principal stresses seemed to be concentrated at the centre of the specimens, as predicted by the computer simulations. Ageing decreased the strengths for all groups and increased the Weibull modulus for the laser group with the 40 μm-width between two grooves. The sandblasting group presented the highest monoclinic phase peak. Although the most significant strength was found within the sandblasting group, the phase transformation was favourable to the laser groups. The Weibull modulus was higher for the laser group with the 60 μm-width between two grooves, confirming the highest homogeneity of its failure distribution. Regardless of the surface treatment, strength was decreased with ageing in all groups. The femtosecond Ti:Sa ultra-short pulse laser irradiation can be suggested as an alternative to the gold standard sandblasting in long-term Y-TZP zirconia rehabilitations, such as crowns and veneers.     

Exploring the biomechanics of walking and crowd “flow”

Crowd movement simulation models are generally based on aggregated speed and flow data collected more than 50 years ago. There appears to be no validated modelling capability to include the impact of recent and future changes in population demographics, resulting from an ageing population and increasing obesity rates. New analytical approaches and data gathering are required to successfully model crowd movement and safety for current and future generations. This study carried out (a) a review of the primary components of crowd movement, demographics and analytical techniques, (b) prototype experiments to investigate age-related aspects of space and potential points of contact and (c) a new predictive model for crowd flow analysis based on pedestrian biomechanics and anthropometric data. The model uses the physical space taken up by the biomechanical walking process and the spatial buffer between points of potential contact with other pedestrians to predict the speed of movement at different levels of congestion. The new analytical model was used to predict single file speeds (for people with different demographics in congested space), which compared well with published experimental data. The next steps for model development for wider “flows” and additional experiments to provide data sets for wider demographics are also proposed.     

Assessing and building municipal open data capability

Information Systems and e-Business Management - In the past decade, cities around the world have published their open data as a new service. Some have used this service innovatively, as a vehicle...     

Zinc supplementation of Friesian cows: Effect on chemical-nutritional composition and aromatic profile of dairy products

Zinc represents an essential microelement for several biochemical mechanisms. The body's inability to store zinc necessarily requires a constant dietary supply to avoid alteration of physiological functions. The aim of the present study was to investigate the effect of dietary enrichment with zinc on chemical-nutritional and aromatic properties of milk and cheese. Thirty commercial dairy cows, balanced for parity, milk production, and days in milk, were randomly assigned to 2 groups. The control group was fed with a conventional complete diet (22 kg of dry matter/animal per day), whereas the experimental group received a daily zinc supplementation of 60 mg per kg of dry complete feed. During the experimental period, the milk yield was monitored and samples of milk and caciotta cheese were collected to obtain information about the chemical-nutritional composition and aromatic profile. Dietary zinc integration did not influence milk yield and composition, but induced a marked reduction of somatic cell count and improved the oxidative stability of ripened caciotta cheese. In both milk and cheese, the experimental group samples were characterized by a lower concentration of saturated fatty acids and an increase in oleic acid, vaccenic acid, and rumenic acid. The aromatic profile of dairy products was also positively affected by dietary zinc intake, with an increase in concentration of carboxylic acids, aldehydes, and esters. The present results suggest a positive role of zinc in improving animal health and nutraceutical properties of milk and corresponding cheese. Taking into account the analysis of volatile compounds, zinc dietary supplementation of dairy cows should contribute to the production of cheeses with interesting organoleptic properties, although more studies are necessary to confirm the consumer acceptability of these changes.     

Deployment of fuel cell vehicles in China: Greenhouse gas emission reductions from converting the heavy-duty truck fleet from diesel and natural gas to hydrogen

Hydrogen fuel cells, as an energy source for heavy duty vehicles, are gaining attention as a potential carbon mitigation strategy. Here we calculate the greenhouse gas (GHG) emissions of the Chinese heavy-duty truck fleet under four hydrogen fuel cell heavy-duty truck penetration scenarios from 2020 through 2050. We introduce Aggressive, Moderate, Conservative and No Fuel Cell Vehicle (No FCV) scenarios. Under these four scenarios, the market share of heavy-duty trucks powered by fuel cells will reach 100%, 50%, 20% and 0%, respectively, in 2050. We go beyond previous studies which compared differences in GHG emissions from different hydrogen production pathways. We now combine an analysis of the carbon intensity of various hydrogen production pathways with predictions of the future hydrogen supply structure in China along with various penetration rates of heavy-duty fuel cell vehicles. We calculate the associated carbon intensity per vehicle kilometer travelled of the hydrogen used in heavy-duty trucks in each scenario, providing a practical application of our research. Our results indicate that if China relies only on fuel economy improvements, with the projected increase in vehicle miles travelled, the GHG emissions of the heavy-duty truck fleet will continue to increase and will remain almost unchanged after 2025. The Aggressive, Moderate and Conservative FCV Scenarios will achieve 63%, 30% and 12% reductions, respectively, in GHG emissions in 2050 from the heavy duty truck fleet compared to the No FCV Scenario. Additional reductions are possible if the current source of hydrogen from fossil fuels was displaced with increased use of hydrogen from water electrolysis using non-fossil generated electricity.     

Reductive Amination Without the Aldehyde: Use of a Ketolactol as an Aldehyde Surrogate

To overcome stability issues associated with the use of an aldehyde in a catalytic reductive amination reaction, a cyclic ketolactol (ω-hydroxylactone) was employed as an aldehyde surrogate to form a γ-aminoacid. The reaction proceeded most favorably over a Pt/C catalyst. The thermodynamics of each step were evaluated using density functional theory calculations, which correctly predicted the dominance of the ring-closed lactol reactant, yet suggested a preference for a ring-opened iminium intermediate upon the initial, slightly endoergic addition of amine substrate. Exoergic hydrogenation of this intermediate provided the thermodynamic driving force for the overall transformation. During development, the reaction was observed to depend significantly on the volumetric gas to liquid mass transfer coefficient (k_La) and this parameter was optimized to ensure successful scale up in a 400 L stirred tank reactor.     

Unique Crystal Structure of a Novel Surfactant Protein from the Foam Nest of the Frog Leptodactylus vastus

Breeding by releasing eggs into stable biofoams (“foam nests”) is a peculiar reproduction mode within anurans, fish, and tunicates; not much is known regarding the biochemistry or molecular mechanisms involved. Lv‐ranaspumin (Lv‐RSN‐1) is the predominant protein from the foam nest of the frog Leptodactylus vastus. This protein shows natural surfactant activity, which is assumed to be crucial for stabilizing foam nests. We elucidated the amino acid sequence of Lv‐RSN‐1 by de novo sequencing with mass‐spectrometry and determined the high‐resolution X‐ray structure of the protein. It has a unique fold mainly composed of a bundle of 11 α‐helices and two small antiparallel β‐strands. Lv‐RSN‐1 has a surface rich in hydrophilic residues and a lipophilic cavity in the region of the antiparallel β‐sheet. It possesses intrinsic surface‐active properties, reducing the surface tension of water from 73 to 61 mN m^?1 (15 μg mL^?1). Lv‐RSN‐1 belongs to a new class of surfactants proteins for which little has been reported regarding structure or function.     

Comparison of chlorine and chloramine in the release of mercury from dental amalgam

The purpose of this project was to compare the ability of chlorine (HOCl/OCl⁻) and monochloramine (NH₂Cl) to mobilize mercury from dental amalgam. Two types of amalgam were used in this investigation: laboratory-prepared amalgam and samples obtained from dental-unit wastewater. For disinfectant exposure simulations, 0.5 g of either the laboratory-generated or clinically obtained amalgam waste was added to 250 mL amber bottles. The amalgam samples were agitated by end-over-end rotation at 30 rpm in the presence of 1 mg/L chlorine, 10 mg/L chlorine, 1 mg/L monochloramine, 10 mg/L monochloramine, or deionized water for intervals of 0 h, 2 h, 4 h, 8 h, and 24 h for the clinically obtained amalgam waste samples and 4 h and 24 h for the laboratory-prepared samples. Chlorine and monochloramine concentrations were measured with a spectrophotometer. Samples were filtered through a 0.45 µm membrane filter and analyzed for mercury with USEPA standard method 245.7. When the two sample types were combined, the mean mercury level in the 1 mg/L chlorine group was 0.020 mg/L (n = 25, SD = 0.008). The 10 mg/L chlorine group had a mean mercury concentration of 0.59 mg/L (n = 25, SD = 1.06). The 1 mg/L chloramine group had a mean mercury level of 0.023 mg/L (n = 25, SD = 0.010). The 10 mg/L chloramine group had a mean mercury level of 0.024 mg/L (n = 25, SD = 0.011). Independent samples t-tests showed that there was a significant difference between the natural log mercury measurements of 10 mg/L chlorine compared to those of 1 mg/L and 10 mg/L chloramine. Changing from chlorine to chloramine disinfection at water treatment plants would not be expected to produce substantial increases in dissolved mercury levels in dental-unit wastewater.     

Validation of a Method for Quantitation of Soybean Lectin in Commercial Varieties

Soybean agglutinin (SBA) protein, also known as soybean lectin, is regarded as an anti‐nutrient due to its negative effect on the ability of monogastric animals to gain weight following consumption of raw soybean seed. Historically, SBA has been measured using a time‐consuming and cumbersome hemagglutination procedure. The objective of our research was to obtain a validated methodology that is precise and accurate in the measurement of SBA while allowing minimally equipped laboratories to effectively conduct the analysis, thus our focus was on evaluating an existing commercially available ELISA, an enzyme‐linked‐lectin‐assay (ELLA), and a hybrid ELISA/ELLA. A new ELLA technique that can detect and quantify lectins was chosen and modified specifically for the quantitation of SBA in soybean seed. The proposed ELLA methodology is similar to a standard sandwich ELISA, and uses polyacrylamide‐linked N‐acetylgalactosamine (Gal–NAc–PAA) for a capture phase and the biotinylated version (Gal–NAc–PAA–Biotin) for detection. Based upon the validation data, the ELLA method can precisely and accurately determine soybean lectin levels in soybean seed. The validated ELLA method was used to quantify SBA in nine commercial soybean varieties introduced between 1972 and 2008 and demonstrated that the natural variability of SBA is subject to the effects of genotype and environment.     

Molecular Mechanisms Underlying β-Adrenergic Receptor-Mediated Cross-Talk between Sympathetic Neurons and Immune Cells

Cross-talk between the sympathetic nervous system (SNS) and immune system is vital for health and well-being. Infection, tissue injury and inflammation raise firing rates of sympathetic nerves, increasing their release of norepinephrine (NE) in lymphoid organs and tissues. NE stimulation of β₂-adrenergic receptors (ARs) in immune cells activates the cAMP-protein kinase A (PKA) intracellular signaling pathway, a pathway that interfaces with other signaling pathways that regulate proliferation, differentiation, maturation and effector functions in immune cells. Immune–SNS cross-talk is required to maintain homeostasis under normal conditions, to develop an immune response of appropriate magnitude after injury or immune challenge, and subsequently restore homeostasis. Typically, β₂-AR-induced cAMP is immunosuppressive. However, many studies report actions of β₂-AR stimulation in immune cells that are inconsistent with typical cAMP–PKA signal transduction. Research during the last decade in non-immune organs, has unveiled novel alternative signaling mechanisms induced by β₂-AR activation, such as a signaling switch from cAMP–PKA to mitogen-activated protein kinase (MAPK) pathways. If alternative signaling occurs in immune cells, it may explain inconsistent findings of sympathetic regulation of immune function. Here, we review β₂-AR signaling, assess the available evidence for alternative signaling in immune cells, and provide insight into the circumstances necessary for “signal switching” in immune cells.