The use of natural (Pinus pinaster) resin in the production of printing ink and the printability effect

Alkyd resins are generally used in the production of printing inks. All industries look for alternative raw materials in the production of ink with the growing inclination toward using natural products. Resins forming the vehicle of the ink to be obtained from natural resources will provide benefits for the environment, nature, and living creatures. The aim of the study was to promote the use of natural resin in the ink system. Natural Pinus pinaster resin was added into vegetable and mineral oil-based solvents in pure form with alkyd resin in different amounts and ink varnishes of different combinations were prepared. Then, printing inks were produced from these varnishes in pure and hybrid form. Following the assessment of the rheological properties of the inks prepared, printing tests were conducted to assess the printing quality parameters. Ideal mixing ratios of the natural resins in the ink were determined for printability. The environmental importance and advantages of the use of natural resins were discussed. Recommendations were given in line with the results to encourage widespread use of natural resins in near future.     

Dyeing of poly(lactic acid) fibres with synthesised novel heterocyclic disazo disperse dyes

Poly(lactic acid) (PLA) is the first melt‐processable, renewable, sustainable and biodegradable natural‐based synthetic fibre. It has a broad range of uses and combines ecological advantages with outstanding performance in textiles. PLA fibre, as an aliphatic polyester, can be dyed with disperse dyes. Apart from the limited number of commercial disperse dyes, disperse dye exhaustion on PLA is generally lower than that on  poly(ethylene terephthalate) (PET). In this study, new heterocyclic disazo disperse dyes, substituted with methyl, nitro and chloro groups at their ortho‐, meta‐ and para‐ positions, synthesised in our previous study, were applied to PLA and PET fibres to examine their dyeing performance, and colour fastness and dye exhaustion properties. Different shades of yellow, orange, reddish brown and brown were obtained. Most of the synthesised novel heterocyclic disazo disperse dyes exhibited good build‐up properties with high K/S levels on both fibres. Para‐ bonding substituent provided higher K/S values than meta‐ and ortho‐ positions for –NO₂ and –Cl substituents for both fibres. Overall, the most synthesised novel heterocyclic disazo disperse dyes in this study exhibited good build‐up properties with high K/S, exhaustion and wet fastness levels on both PLA and PET fibres.      

Capturing Preservice Chemistry Teachers’ Visual Representations of Redox Reactions through Storyboards

This study aimed to identify preservice chemistry teachers’ understanding of redox reactions at the submicroscopic level and how they make connections to macroscopic level. Twenty‐five preservice chemistry teachers first viewed a video of a redox reaction happening between a zinc wire and a copper(II) sulfate solution, then they reflected on their macroscopic observations, and generated storyboards (a sequence of drawings) representing this reaction at the submicroscopic level. Both the reflections and the storyboards were coded, and the categories reflecting the participants’ levels of understanding were determined. Results showed that the participants usually identified the macroscopic evidences, but they had conceptual difficulties in interpreting and representing evidences at the submicroscopic level. Few participants indicated a scientific or a moderate understanding of redox reactions, whereas the majority exhibited either weak or alternative understanding of redox reactions.     

Effects of different dwell-times under low pelletization pressure on the physical properties of the Bi-2212 ceramics

Journal of Materials Science: Materials in Electronics - We reported the evaluation of superconducting properties of Bi-2212 ceramics prepared under different dwell times between 12 and...     

Photofermentative hydrogen production from molasses: Scale-up and outdoor operation at low carbon-to-nitrogen ratio

Photofermentative hydrogen production was carried out under outdoor conditions with a Rhodobacter capsulatus strain on molasses, a renewable and sustainable feedstock. An existing photobioreactor design was scaled-up from 9 L to 20 L. The decreased carbon-to-nitrogen (C/N) ratio of 13.0, compared to our previous work, accelerated growth and resulted in a reduced lag period for hydrogen production as well as higher productivities in the exponential phase. However, the low C/N ratio also promoted a high optical density due to growth, limiting light transmission. Still, the maximum productivity was found as 0.47 mol H₂/(m³·h), significantly higher than our result with the smaller reactor volume. High rates of production could not be maintained presumably due to the combined effects of cloudy periods, the aforementioned C/N ratio and decreasing pH. These results suggest that the scale-up was successful and there is potential for further improvement using optimal C/N ratio and cell concentration values.     

Fibromyalgia syndrome in Turkish hemodialysis patients

The aim of our study was to evaluate the frequency of fibromyalgia syndrome (FMS) in hemodialysis (HD) patients and to assess whether this syndrome is associated with gender, age, duration of HD, or various laboratory parameters. This study was composed of 221 chronic HD patients (99 females and 122 males), and we recorded each participant's age, gender, causes of kidney failure, HD duration, education level, and symptoms related to FMS, which was diagnosed according to the 2010 American College of Rheumatology criteria. We documented the laboratory parameters for all patients. In addition, patients with FMS filled out the Fibromyalgia Impact Questionnaire. Twenty‐two patients met the diagnostic criteria for FMS (9%), and there were no statistically significant differences related to age, gender, or HD duration between FMS and non‐FMS groups (P > 0.05). In addition, the education levels were lower in patients diagnosed with FMS (P < 0.05), and there were statistically significant differences related to sleep disturbance, fatigue, and cognitive symptoms between the two groups (P < 0.05) as well. However, their laboratory parameters were similar (P > 0.05). There was a higher prevalence of FMS in HD patients than in the general population. Sleep disturbances, fatigue, education level, and cognitive symptoms were associated with FMS, but there was no correlation between the laboratory parameters and this condition.